Subsea Pipeline Design, Analysis, and Installation - Qiang Bai, Yong Bai

Subsea Pipeline Design, Analysis, and Installation (eBook)

Qiang Bai, Yong Bai (Autoren)

eBook Download: PDF | EPUB

2014 | 1. Auflage
824 Seiten
Elsevier Science (Verlag)
978-0-12-386889-3 (ISBN)

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries.

Gain expert coverage of international design codes
Understand how to design pipelines and risers for today's deepwater oil and gas
Master critical equipment such as subsea control systems and pressure piping

Dr. Qiang Bai obtained a doctorate for Mechanical Engineering at Kyushu University, Japan in 1995. He has more than 20 years of experience in subsea/offshore engineering including research and engineering execution. He has worked at Kyushu University in Japan, UCLA, OPE, JP Kenny, and Technip. His experience includes various aspects of flow assurance and the design and installation of subsea structures, pipelines and riser systems.

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. Gain expert coverage of international design codes Understand how to design pipelines and risers for today's deepwater oil and gas Master critical equipment such as subsea control systems and pressure piping

Mechanical Design

Abstract

This chapter gives a brief introduction to subsea pipeline systems, general design approaches, and installation methods. A complete pipeline system usually consists of several parts: flowlines, rises, processing facilities, and so on. To design a pipeline system, the three stages of conceptual design engineering, front end engineering design engineering, and detail design engineering may be carried out depending on the project’s requirements. The design process and content are elaborated for each stages. Moreover, the installation methods of subsea pipelines are demonstrated briefly. With the technical development in recent years, a design approach called design through analysis (DTA) is introduced. Finite element analysis based pipeline design and analysis make the design process easier and more accurate.

Key words

Subsea pipeline systempipeline analysisgeneral designinstallation methodsfinite element analysis

Chapter Outline

1. Introduction

2. Design Stages and Process

Design Stages

Design Process

3. Design through Analysis

4. Pipeline Design Analysis

General

Pipeline Stress Checks

Span Analysis

On-Bottom Stability Analysis

Thermal Expansion Analysis

Global Buckling Analysis

Pipeline Installation

5. Finite Element Analysis

Introduction

Subsea pipelines are used for a number of purposes in the development of subsea hydrocarbon resources, as shown in Figure 1.1. A pipeline system can be a single-pipe, pipe-in-pipe, or bundled system. Normally, the term of subsea flowlines is used to describe the subsea pipelines carrying oil and gas products from the wellhead to the riser base; the riser is connected to the processing facilities (e.g., a platform or a floating production storage and offloading vessel (FPSO)). The subsea pipelines from the processing facilities to shore are called export pipelines, while the subsea pipelines from the platform to subsea equipment used to transfer water or chemical inhibitors are called water injection or chemical flowlines.

The design process for each type of line in general terms is the same, and it is this general design approach that is discussed in this book.

Finally, in Chapter 23, a pipeline design project is used as an example to demonstrate how the technical development described in this book is used to save on costs and ensure quality and safety.

Figure 1.1Subsea pipelines.Source: Bai and Bai [1].

Design Stages and Process

Design Stages

The design of pipelines is usually performed in three stages:

• Conceptual design engineering.

• Front end engineering design (FEED) engineering.

• Detail design engineering.

The objective and scope of each of these design stages varires, depending on the operator and the size of the project. However, the primary process and purposes are generally summarized as follows [2]:

1. Conceptual engineering. The primary objectives of conceptual engineering normally are

• To establish technical feasibility and constraints on the system design and construction.

• To eliminate nonviable options.

• To identify the required information for the forthcoming design and construction.

• To allow basic cost and scheduling to be estimated.

• To identify interfaces with other systems, planned or currently in existence.

The value of this early engineering work is that it reveals potential difficulties and areas where more effort may be required in the data collection and design areas.

2. Front end engineering design. The primary objectives of FEED normally are

• To perform pipeline design so that the system concept is fixed. This includes

• To verify the sizing of the pipeline.

• To determine the pipeline grade and wall thickness.

• To verify the pipeline against design and code requirements for installation, commissioning, and operation.

• To prepare authority applications.

• To perform a material takeoff sufficient to order the line pipe (should the pipe fabrication be a long lead item, hence requiring early startup).

The level of this engineering design is sometimes specified as being sufficient to detail the design for inclusion into an engineering, procurement, construction, and installation (EPCI) tender. The EPCI contractor should then be able to perform the detailed design with the minimum number of variations as detailed in their bids.

3. Detail engineering. The detailed engineering phase is, as the term suggests, the development of the design to a point where the technical input for all procurement and construction tendering can be defined in sufficient detail. The primary objectives can be summarized as

• Route optimization.

• Selection of wall thickness and coating.

• Confirmation of code requirements regarding strength, vortex-induced vibrations (VIV), on-bottom stability, global buckling, and installation.

• Confirmation of the design and additional design as defined in the preliminary engineering.

• Development of the design and drawings in sufficient detail for the subsea scope. This may include pipelines, tie-ins, crossings, span corrections, risers, shore approaches, and subsea structures.

• Preparation of detailed alignment sheets based on most recent survey data.

• Preparation of specifications, typically covering materials, cost applications, construction activities (i.e., pipe laying, survey, welding, riser installations, spoolpiece installation, subsea tie-ins, subsea structure installation), and pre-commissioning (i.e., flooding, pigging, hydrotesting, cleaning, drying).

• Preparation of material take off (MTO) and compilation of necessary requisition information for the procurement of materials.

• Preparation of design data and other information required for the certification authorities.

Design Process

The object of the design process for a pipeline is to determine, based on given operating parameters, the optimum pipeline size parameters. These parameters include

• Pipeline internal diameter.

• Pipeline wall thickness.

• Grade of pipeline material.

• Type of coating-corrosion and weight (if any).

• Coating wall thickness.

The design process required to optimize the pipeline size parameters is an iterative one, summarized in Figure 1.2. The design analysis is illustrated in Figure 1.3.

Each stage in the design process should be addressed whether it is a conceptual, preliminary, or detailed design. However, the level of analysis varies, depending on the requirements. For instance, when reviewing the objectives of the detailed design (Section 1.2.1), the design should be developed such that the following are determined:

• Pipeline wall thickness, grade, coating, and length are specified so that pipeline can be fabricated.

• Route is determined such that alignment sheets can be compiled.

Figure 1.3Flowline design analyses.Source: Bai and Bai [1].

• Pipeline stress analysis is performed to verify that the pipeline is within the allowable stresses at all stages from installation, testing to operation. The results also include pipeline allowable spans, tie-in details (including expansion spool pieces), allowable testing pressures, and other input to the design drawings and specifications.

• Pipeline installation analysis is performed to verify that stresses in the pipeline at all stages of installation are within the allowable values. The analysis should specifically confirm that the proposed method of pipeline installation would not result in pipeline damage. The analysis has input into the installation...

Erscheint lt. Verlag	18.2.2014
Sprache	englisch
Themenwelt	Naturwissenschaften ► Physik / Astronomie
	Technik ► Bauwesen
	Technik ► Bergbau
	Technik ► Elektrotechnik / Energietechnik
	Wirtschaft ► Betriebswirtschaft / Management ► Logistik / Produktion
ISBN-10	0-12-386889-0 / 0123868890
ISBN-13	978-0-12-386889-3 / 9780123868893

Haben Sie eine Frage zum Produkt?

PDF (Adobe DRM)
Größe: 49,2 MB

Kopierschutz: Adobe-DRM
Adobe-DRM ist ein Kopierschutz, der das eBook vor Mißbrauch schützen soll. Dabei wird das eBook bereits beim Download auf Ihre persönliche Adobe-ID autorisiert. Lesen können Sie das eBook dann nur auf den Geräten, welche ebenfalls auf Ihre Adobe-ID registriert sind.
Details zum Adobe-DRM

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen eine Adobe-ID und die Software Adobe Digital Editions (kostenlos). Von der Benutzung der OverDrive Media Console raten wir Ihnen ab. Erfahrungsgemäß treten hier gehäuft Probleme mit dem Adobe DRM auf.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen eine Adobe-ID sowie eine kostenlose App.
Geräteliste und zusätzliche Hinweise

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

EPUB (Adobe DRM)
Größe: 36,1 MB

Dateiformat: EPUB (Electronic Publication)
EPUB ist ein offener Standard für eBooks und eignet sich besonders zur Darstellung von Belletristik und Sachbüchern. Der Fließtext wird dynamisch an die Display- und Schriftgröße angepasst. Auch für mobile Lesegeräte ist EPUB daher gut geeignet.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Print-Ausgabe

Buch | Hardcover

179,95 €