Proceedings of the 17th Conference on the Rehabilitation and Reconstruction of Buildings (CRRB 2015)

Preface, Committees
Chapter 1: Properties, Protection and Remediation of Wood Materials and Structures
Bonded Joints in Water-Repellent Timber Structures
Discoloration of Historic Wood after the Application of Nanotextiles
Unsuitable Mounting of Wooden Cladding to the Base Structure and its Consequences
Coefficients of Transverse Contraction of the Wood Cell Constituents and their Effect on the Cell Behavior
Modulus Mapping and its Use to Determine the Effect Process of Drying on the Cells of Spruce
Comparison of Modulus of Elasticity of Glued Laminated Timber
Chapter 2: Materials and Technologies for Surface Treatment and for Surface Finish
Modification of Silica Gel by Nanosilica
Properties of the Superabsorbent Polymer in Cement Paste
The Occurrence of Mold in Construction Materials before Inbuilt into New Building and Protection against this Type of Biodegradation
Composition and Microstructure of Plasters in Convent of the Želiv Monastery (Czech Republic)
Microscopy Measurement of Open Porosity as a Function of Hydrophobic Impregnation
Water Vapour Resistance Factors of Three Wall Surface Finishing
Development of Lightweight, Remediation Plasters and Study of their Moisture Behavior
Volume Stability of Polymer-Silicate Based Materials Exposed to High Temperatures
A Study of Crushed Glass as a Replacement for Cement in Cement Pastes
Influence of Different Nanoparticles in Stone Silicon-Based Consolidant
Impact of Relative Humidity on Modified Alkoxysilane Gels
Chapter 3: Properties and Production Technologies of Concretes and Building Composites
The Behavior of Fly Ash in Concrete Mixture
Influence of Carbon Nanotubes on Mechanical Properties of High Performance Concrete (HPC)
Influence of Finely Ground Recycled Concrete on Microstructure of Cement-Based Composite Material
Influence of Gypsum Additive on the Formation of Tobermorite in Autoclaved Aerated Concrete
Sulfate Attack on Different Types of Concrete in Media Simulating Sewer System
Using Waste PUR Granules as an Alternative to Integrated Thermal Insulation in Ceramic Blocks
Chapter 4: Reinforcing Components from Fibers and Textiles
Structural Studies of Nanofiber Membranes
Quasicontinuum Simulation of Nanotextile Based on the Microplane Model
Influence of the Oxygen Plasma Treatments on Surface Wettability of Glass Micro Fibers Used as Reinforcement in any Mortars
The Influence of Technology on the Quality Nanotextile
Chapter 5: Methods of Measurements, Experimental Determination and Testing
Experimental Determination of Concrete Resistance of Various Composition to Water and De-Icing Chemicals
Experimental Determination of the Influence of an Air Entraining Additive on the Resistance of Concrete to Chemical Defrosting Agents
Evaluation of Permeability Tests of Surface Layer of Concrete of Various Composition
Design of Methodology for Non-Destructive Testing of Steel-Reinforced-Fiber-Concrete
Diagnosis of Myslinka Stone Railway Bridge
Measuring of Equivalent Air Layer Thickness of Nanofibre Textiles
Characterisation of Micoorganism from Individual Layers of the Building Envelope (ETICS) and Methods of their Sampling
Long Term Measuring of Expansions and Contractions of Pre-Stressed Concrete Bridge Structure
The Properties of Historical Wrought Iron Tie Rods
Repairs of Steel Structures after Long-Term Use in Aggressive Environment