TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings (eBook)
XXVIII, 2170 Seiten
Springer International Publishing (Verlag)
978-3-030-36296-6 (ISBN)
This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Contents 6
Part I Advanced Real Time Imaging 28
1 In Situ Analysis of Incipient Melting in a Novel High Strength Al–Cu Cast Alloy Using Laser Scanning Confocal Microscopy (LSCM) 30
2 In Situ Diagnosis and Modeling of Disorder Trapping in Rapid Solidification of Intermetallic Compound 40
3 Development of HT-LSCM Techniques for the In Situ Study of the Peritectic Phase Transition 51
4 Sub-rapid Solidification Study of Silicon Steel by Using Dip Test Technique 64
5 HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations 72
6 A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique 81
7 Study on the Interaction Process Between Mold Flux and TiN/TiO? by Sessile Drop Method 91
8 Real-Time Imaging of Melting and Crystallization of Synthetic Ferronickel Slags with Varying B?O? Content 99
9 An Investigation of the Impact Experimental Equipment Parameters Have on Synthetic Slag Behaviors in an Oxidative Environment Using a Confocal Laser Microscope 107
Part II Additive Manufacturing Fatigue and Fracture IV: Toward Confident Use in Critical Applications 118
10 Expedited Optimization of AM Materials Using Miniaturized Testing 119
11 Improvement of Fatigue Strength in Lightweight Selective Laser Melted Alloys by In-Situ and Ex-Situ Composition and Heat Treatment 136
12 A Fatigue Life Approach for Additively Manufactured Structures 148
13 Deriving the Structural Fatigue Behavior of Additively Manufactured Components 159
Part III Additive Manufacturing for Energy Applications II 170
14 Mechanical Testing of 3D Printed Materials 171
15 Microstructural Characterization and Thermomechanical Behavior of Additively Manufactured AlSi10Mg Material and Architected Cellular Structures 182
16 Preliminary Concepts of an Automated Additive Manufacturing System for Accident Tolerant Uranium Silicide Fuel Pellets 191
Part IV Additive Manufacturing: Advanced Characterization with Synchrotron, Neutron, and In Situ Laboratory-Scale Techniques 198
17 Creep Behavior of a AlSiMg Alloy Produced by Additive Manufacturing 199
18 Microstructural Development and Mechanical Properties of Selective Laser Melted Co–Cr–W Dental Alloy 208
Part V Additive Manufacturing: Alternative Processes (Beyond the Beam) 216
19 Characterization of 17-4 PH Processed via Bound Metal Deposition (BMD) 217
20 Portland 3D Printing of Portland Cement Pastes with Additions of Kaolin, Superplastificant, and Calcium Carbonate 229
21 Additive Manufacturing of Aluminum Using Friction Stir Deposition 239
22 Impacts of Friction Stir Processing on Microstructure and Corrosion Properties of DMLS-AlSi10Mg 251
23 Effect of Counter-Gravity 3D Printing on PLA Interlayer Fracture Energy 261
24 Production of Teaching Materials Through 3D Printing as Support for Educational Processes Related to the Sciences, Heritage, and Culture 268
Part VI Additive Manufacturing: Materials Design and Alloy Development II 275
25 A Novel Titanium Alloy for Additively Manufactured Orthopaedic Implants 276
26 Hybrid Additive Manufacturing of MS1-H13 Steels via Direct Metal Laser Sintering 286
27 On the Effect of Building Direction on the Microstructure and Grain Morphology of a Selective Laser Melted Maraging Stainless Steel 293
Part VII Additive Manufacturing: Processing Effects on Microstructure and Material Performance 304
28 Phase-Field Simulation of Solidification Behavior of AlSi10Mg Alloys Manufactured Through Direct Metal Laser Sintering 305
29 Low Surface Roughness Additively Manufactured AlSi10Mg: The Impacts on Corrosion and Water Repellency Properties 314
30 Experimental Evaluation of Additively Manufactured Continuous Fiber Reinforced Nylon Composites 326
31 Annealing of Additively Manufactured Inconel 625 334
32 Critical Quenching Rates After Solution Annealing: Peculiarities of Aluminum–Silicon Alloys Fabricated by Laser Powder-Bed Fusion 346
33 Effect of Scanning Strategy on Additively Manufactured Ti6Al4V 357
34 Experimental Study on the Laser Cladding of T15 Coating for 42CrMo Steel 370
35 Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders 378
36 Investigation of Martensite ?’ Phase Transformation During Heat Treatment of High-Speed Selective Laser Melted Ti6Al4V Components 387
37 Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature 396
38 Microstructural Characteristics of Stainless Steel 316L Processed by Selective Laser Melting Technology 406
39 Microstructure and Mechanical Properties of AISI 420 Stainless Steel Produced by Wire Arc Additive Manufacturing 414
40 On the Heat Treatment of AlSi10Mg Fabricated by Selective Laser Melting Process 426
41 On the Microstructure and Corrosion Behavior of Wire Arc Additively Manufactured AISI 420 Stainless Steel 436
42 On the Size Effects in Additively Manufactured Titanium and the Implications in AM Components 450
43 Precipitation Behaviour and Its Strengthening Effect of Maraging Steel in Laser Cladding Remanufacturing 458
44 Scaling up Build Rates in Laser Powder Bed Fusion of Metals Using Dimensionless Parameters 470
45 The Effects of LENS Process Parameters on the Behaviour of 17-4 PH Stainless Steel 481
46 The Process Parameters Extended Criterion for Laser Engineered Net Shaping of Inconel 738 491
Part VIII Advanced High Strength Steels IV 503
47 A Novel High-Strength Oxidization-Resistant Press Hardening Steel Sheet Requiring No Al–Si Coating 504
48 Effect of the Cooling Time on the Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel 513
49 In Situ Observation of the Peritectic Reaction and Transformation in a Commercial HSLA Steel 522
50 Effect of Al Content and Solution Treatment on Tensile and Corrosion Resistance of Fe–Mn–Al–C Low-Density Steel 534
51 Effects of M (M=Ce, Zr, Ce–Zr) Compound Treatment on Characteristics of Inclusions and Microstructure FH40 Ship-Building Steel Ingots 546
52 Multi-scale Modeling of Hydrogen Embrittlement in High-Strength Steels 558
53 Electrochemical Characterization of Advanced High Strength Steel DP 780 MPa 568
Part IX Advanced Magnetic Materials for Energy and Power Conversion Applications 578
54 High-Performance Amorphous Wire Magneto-Impedance Sensor for Biomagnetic Field Detection 579
55 A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet 590
56 Electrochemical Polishing of Thin Metallic Glass Ribbons 597
57 Structure and Magnetic Properties of Novel High-Magnetization Fe–Mn Powders Synthesized by Hydrogen Reduction of Nanoferrites 606
58 Low-Temperature Synthesis of Superparamagnetic Fe?O? Morphologies Tuned Using Oleic Acid as Crystal Growth Modifiers 611
Part X Advanced Materials for Energy Conversion and Storage VI 624
59 Preformed Oxide Scale Chemistry and Its Influence on Local Metal Loss During Dual Atmosphere Corrosion 625
60 Preparation of Macro Encapsulated Phase Change Materials for High Temperature Energy Storage Applications 636
61 Enhanced Stability of B-Site W Doped Pr?.?Sr?.?Fe?-xWxO?-? Ceramic Membranes for Water Splitting 645
62 Fe?O? Nano-particles Grown on Carbon Fabric as a Freestanding Anode for High-Performance Lithium-Ion Batteries 657
63 Study on the Influence of Different Preheating Conditions on Carbon Structure of 1/3 Coking Coal 664
64 Synthesis of Nanoencapsulated Phase Change Materials with Ag Shell for Thermal Energy Storage 674
Part XI Advanced Microelectronic Packaging, Emerging Interconnection Technology and Pb-free Solder 682
65 Bonding and High-Temperature Storage Performance of Die Attachment with Ag Paste Sintering on Bare Direct Bonding Aluminum (DBA) Substrate 683
66 Fatigue and Creep Properties of Sintered Ag Paste from Room Temperature to High Temperature 693
67 Reliability Behavior of Surface Mount Devices Assembled with Bismuth Bearing Low-Melt Solder Pastes 703
Part XII Advances and Discoveries in Non-equilibrium Driven Nanomaterials and Thin Films 719
68 The Transition from Amorphous Carbon to Carbon Nanohorns by DC Arc Discharge 720
Part XIII Advances in Biomaterials for 3D Printing 727
69 Design of Metallic Lattices for Bone Implants by Additive Manufacturing 728
Part XIV Advances in Surface Engineering II 743
70 Effects of Ti and Y Addition on the Scale Spalling Resistance of CoNiCrAl Alloys 744
71 Electroplating Powder for Cold Spray Applications 749
72 Investigation on the Laser Surface Treatment of Steel and Aluminum with a Single-Mode Pulsed Fiber Laser Source 755
Part XV Advancing Current and State-of-the-Art Application of Ni- and Co-based Superalloys 763
73 On the Temperature Limits of Ni-Based Superalloys 764
74 Microstructure Evolution of the 410 Stainless Steel and Co-Based Alloy Dissimilar Welded Joint Manufactured by Electron Beam Welding 772
75 The Role of Microstructural Homogenization on Tensile and Stress-Rupture Behavior of Selective Laser Melted Nickel Based 718 Alloy 781
Part XVI Algorithm Development in Materials Science and Engineering 792
76 Development of an Evolutionary Deep Neural Net for Materials Research 793
77 An Improved Collocation Method to Treat Traction-Free Surfaces in Dislocation Dynamics Simulations 805
78 Simulation of Compressive Stress–Strain Curve for Additive Manufactured Ti6Al4V Cuboctahedron Cellular Structure 811
Part XVII Bio-Nano Interfaces and Engineering Applications 819
79 Molecular Mechanisms in Metal Oxide Nanoparticle Interactions with Biomolecules 820
80 Removal of Chromium (VI) from Water onto Activated Carbon by Adsorption in Dynamic Mode 829
Part XVIII Biological Materials Science 838
81 Effect of Nanoclay Reinforcement on the Property of Rubber Seed Oil Polyurethane Nanocomposites 839
82 Characterization of Soft Actuation Through Ultrasonic Atomization 852
83 Active Metamaterial Skins for Friction Coefficient Control 860
84 The Effect of the Addition of Cobalt Powder on Compressive Properties of Porous Titanium as Bone Substitute Materials 867
Part XIX Bulk Metallic Glasses XVII 876
85 Effect of Ni–Nb Metallic Glass on Moderating the Shock Damage in Crystalline Ni-Amorphous Ni??Nb?? Nanocomposite Structure: A Molecular Dynamics Study 877
Part XX Coatings and Surface Engineering for Environmental Protection II 890
86 Estimating the Effect that Interactions Between Chemical Reactions and Environmental Influences Have on the Corrosivity of the Electrolyte 891
87 The Effect of Surface Treatment on the Performance of a Zirconium-Based Conversion Coating on AA7075 Automotive Alloys for Protection Against Filiform Corrosion 903
88 Cold Spray Coating for Corrosive Conditions 913
89 Corrosion Control by Using Zinc as Sacrificial Anode Cathodic Protection in Geopolymer Concrete 917
90 Corrosion Resistance and Electrochemical Corrosion Characteristics of Stainless Steel for Seawater Desalination Evaporator 924
91 Establishment of a Lead Loop Facility to Support Lead Cooled Fast Reactor Design 937
Part XXI Computational Discovery and Design of Emerging Materials 945
92 Analysis of Chemical Activity of Bismuthene in the Presence of Environment Gas Molecules by Means of Ab Initio Calculations 946
Part XXII Computational Materials Science and Engineering of Materials in Nuclear Reactors 955
93 Molecular Dynamics Simulations of Phosphorus Migration in a Grain Boundary of ?-Iron 956
94 Recent Development of Thermochimica for Simulations of Nuclear Materials 964
95 Development of a New Thermochemistry Solver for Multiphysics Simulations of Nuclear Materials 974
Part XXIII Computational Thermodynamics and Kinetics 987
96 Experimental and Modeling Studies Using Fe?O? Doped Coke 988
97 Kinetic Monte Carlo Simulations of Effect of Grain Boundary Variability on Forming Times of RRAM Conductive Filaments 998
98 Kinetics of Scrap Melting in Iron–Carbon Bath 1005
99 Mesoscopic Model of Free Surface Behaviour in the Continuous Casting Mold 1018
100 Numerical Study of Raceway Shape and Size in a Model Blast Furnace 1028
101 Reduction Kinetics Analysis of Fe?O? in the Case of Carbon Precipitation 1039
Part XXIV Defects and Properties of Cast Metals 1048
102 An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process 1049
103 Defects Comparison Between Single- and Double-Sided Electron Beam Welded Dissimilar DP600 Steel to 5754 Al Alloy Joints: X-Ray Tomography Study 1060
104 The Influence of Ultrasound on the Microstructure Formation during the Solidification of A356 Ingots Processed via a 2-Zone Induction Melting Furnace 1070
105 An Investigation on Wear Properties of A390 Alloy by Rare Alloying Elements 1080
106 How to Prevent Gas Porosity Defects in Castings of Stator Housing in Grey Cast Iron 1091
107 Study on the Dendrite Arm Spacing of S50C Steel Produced by CSP 1101
108 Multiphase Flow-Related Defects in Continuous Casting of Steel Slabs 1112
109 Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting 1125
110 Numerical Simulation of Macrosegregation Behavior of Billet During Continuous Casting 1138
111 Component Analysis of Defects in Secondary Special Brass Alloy 1149
112 Microstructure Evolution and Chemical Composition in Continuous Directional Solidification Cu–P–Sn Alloy 1162
Part XXV Deformation and Transitions at Grain Boundaries VII 1169
113 Stress Induced Fracture Transition in High-Temperature 9% Cr–CrMoV Dissimilar Welded Joint 1170
Part XXVI Electrometallurgy 2020 1179
114 Effective Copper Diffusion Coefficients in CuSO?–H?SO? Electrowinning Electrolytes 1180
115 A 3-D Numerical Model to Predict Low Temperature Aluminum Electrochemical Process Using Ionic Liquids as Electrolytes at Different Boundary Conditions 1191
116 Aluminum Extraction by Al–Si–Fe Alloy Electrolysis 1203
117 Study on High-Temperature Liquid Lithium Battery with LiI–KI Electrolyte 1214
118 Effects of Precursor Concentration on the Surface Morphology and Electrocatalytic Performance of Ti/IrO?–RuO?–SiO? Anode for Oxygen Evolution Reaction 1221
119 Electrochemical Behavior of Fe?O? in Electro-Deoxygenation in NaCl–CaCl? Molten Salt System 1232
120 Reduction Mechanism of Metal Cobalt from Cathode Material of Waste Lithium Cobalt Oxide Battery 1240
121 Review on the Bio-oxidation of Pyrite: Implications for the Mining Industry 1247
Part XXVII Environmental Degradation of Additively Manufactured Alloys 1253
122 Corrosion and Protection (Conversion Coating and Plasma Electrolytic Oxidation) of Ti?Al?V Processed by Powder Bed Fusion—Additive Manufacturing. EIS Study 1254
123 High Temperature Corrosion of Additively Manufactured Inconel 625 1265
Part XXVIII Environmentally Assisted Cracking: Theory and Practice 1275
124 Comparative Assessment of the Fracture Behaviour of API-5L X65 and Micro-alloyed Steels in E80 Simulated Fuel Ethanol Environment 1276
125 Comparison of Fracture Morphologies and Hydrogen States Present in the Vicinity of Fracture Surface Obtained by Different Methods of Evaluating Hydrogen Embrittlement of DP and TRIP Steels 1284
126 Crack Initiation and Propagation Analyses of Hydrogen-Related Fracture Surfaces of Tempered Martensitic Steel 1293
127 Determining Reliability Over Time for Stainless Steels Susceptible to Chloride-Induced Stress Corrosion Cracking 1302
128 Effects of Chromium and Molybdenum on Hydrogen Absorption Behavior in Iron 1313
129 Environmental Accelerated Deterioration Modeling of Large Glass Fiber-Reinforced Polymer Composite Structures/Systems 1322
130 Fracture Failure Analysis on 20MnTiB Steel High-Strength Bolt Used in Bridges 1331
131 Fracture Failure Analysis on 35VB Steel High-Strength Bolt Used in Bridge 1340
132 Role of Chloride on the Fracture Behaviour of Micro-alloyed Steel in E20 Simulated Fuel Ethanol Environment 1351
133 Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water 1359
Part XXIX Fatigue in Materials: Fundamentals, Multiscale Characterizations and Computational Modeling 1371
134 Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel 1372
135 Fatigue Behavior and Analysis of Heavy Duty Riveted Steel Grating 1379
136 Fatigue Crack Growth Behavior in Al-7075 Under In-Plane Biaxial Loading with Mixed-Mode Overloads 1391
137 Review of Surface Deformation Strengthening on the Fatigue Behavior of Metal Material 1405
Part XXX Fracture Modeling of Composite Materials 1413
138 Computational Polyetheylene-Ceramic Composite Plate Design and Optimization 1414
139 An Improved Fracture Mechanics-Informed Multiscale Thermomechanical Damage Model for Ceramic Matrix Composites 1423
Part XXXI Functional Nanomaterials 2020: Translating Innovation into Pioneering Technologies 1434
140 Mechanical Properties of Fibers Coated by Atomic Layer Deposition for Polymer-Matrix Composites with Enhanced Thermal and Ultraviolet Resistance 1435
141 Novel VS? Nanorods Synthesized by a Facile Solvothermal Method for High Performance Electrochemical Capacitor Electrode 1450
142 Fabrication of Bilayer Nanoporous Copper from Rapidly Solidified Al??Cu?? Ribbons by Chemical Dealloying Technique 1459
143 Study of pH Influence in the Synthesis of Copper Nanoparticles Using Ascorbic Acid as Reducing and Stabilizing Agent 1467
Part XXXII High Entropy Alloys VIII 1478
144 An Investigation into the Link Between Microstructure and Pitting Corrosion of Novel Alloy FBB8+Ti 1479
145 Evaluation of Microstructural and Mechanical Properties of AlxCrFeMnNi High Entropy Alloys 1490
146 Fabrication and Hardness Behaviour of High Entropy Alloys 1497
147 Preparation of CoCrFeNi High-Entropy Alloy via Electro-Deoxidation of Metal Oxides 1508
148 Second Phase of 29Fe15Al18Cr27Ni High-Entropy Alloy 1517
Part XXXIII ICME Gap Analysis in Materials Informatics: Databases, Machine Learning, and Data-Driven Design 1528
149 Data-Driven Hard-Magnetic Material Selection for AC Applications by Multiple Attribute Decision Making 1529
150 Steel Development and Optimization Using Response Surface Models 1542
Part XXXIV Low-Cost Titanium: ‘Affordable Ti’ 1550
151 Aeration Leaching Process for Producing Synthetic Rutile in a Novel Gas–Liquid–Solid Reactor 1551
152 Cost-Effective PM Ti Compositions and Processing 1559
153 Electrodeposition of Titanium Aluminide (TiAl) Alloy from AlCl?–BMIC Ionic Liquid at Low Temperature 1568
154 Low Temperature Synthesis Method of TiH? Powder from TiCl? Reduction with MgH? 1577
155 Preparation of Ti-6Al-4V Alloy Powder by Aluminothermic Reduction 1588
156 Deoxidation of TiAl Alloy Scraps with Metallic Yttrium and Calcium Fluoride Slag 1597
157 Effect of Sintering Temperature on Mechanical and Tribological Behavior of Ti–Ni Alloy for Biomedical Applications 1606
Part XXXV Material Behavior Characterization via Multi-directional Deformation of Sheet Metal 1616
158 Numerical Prediction of Ductile Fracture in Bi-Axially Stretched Sheet Metal 1617
Part XXXVI Materials and Chemistry for Molten Salt Systems 1623
159 Cathodic Behaviour of Moisture in LiCl–KCl Eutectic Melt: Applications to Pyroprocessing 1624
160 Characterization of LiCl–KCl Eutectic and LiCl–KCl + H?O Mixtures Using Electrochemical Impedance Spectroscopy 1633
161 Effect of Mn and Zn Inhibitors on the Corrosion of Incoloy 800H in the MgCl?–KCl Molten Salt 1643
Part XXXVII Materials Research in Reduced Gravity 1653
162 Effects of Bi on the Interface Layer Between Sn-Based Alloy and Cu Substrate Under Microgravity Conditions 1654
Part XXXVIII Microstructural Template Consisting of a Face-Centered Cubic Matrix with Ordered Precipitates: Microstructural Evolution and Properties 1661
163 Site Preference of the Alloying Additions on Mechanical Properties of L1? Ni?Co Alloys 1662
Part XXXIX Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XIX 1674
164 Effects of Ge/Sb Intermixing on the Local Structures and Optical Properties of GeTe–Sb?Te? Superlattice 1675
Part XL Phase Transformations and Microstructural Evolution 1685
165 In-Situ X-Ray Diffraction Measurement During Deformation of Austenite Above the Ae? Temperature 1686
166 Effect of Heat Treatments on Microstructures and Mechanical Properties of Ti-5553 Alloy 1696
167 Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi?Cu?.?Mg?.? Cast Alloy 1705
168 XRD and Synchrotron-Based XRD Study of Chalcopyrite Leaching Catalyzed by Silver Ions 1718
169 The Validity of Additivity Rule for Pearlite Transformation in Eutectoid Steels 1727
170 Carbon and Microstructure Effects on the Magnetic Properties of Fe–CN Soft Magnetic Materials (Minnealloy) 1735
171 Carbonation Behavior of Calcium Aluminate Cements with Additions of Silica 1747
172 Dilatometric Analysis of the Martensite Decomposition by Stages During Continuous Heating 1755
173 Highly Enhanced Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel by Optimized Post-heating Pulse 1765
Part XLI Powder Materials for Energy Applications 1775
174 Preparation of Zinc Carbonate Hydroxide Microparticles via Deamination Precipitation by Heating 1776
Part XLII Process Metallurgy and Electrochemistry of Molten Salts, Liquid Metal Batteries, and Extra-terrestrial Materials Processing: An EPD Symposium in Honor of Don Sadoway 1786
175 History of Inventions and Innovations for Aluminum Production 1787
176 Trends and Challenges for Electrowinning of Aluminium and Magnesium from Molten Salt Electrolytes 1803
177 Thermodynamic and Kinetic Modelling of Molten Oxide Electrolysis Cells 1815
Part XLIII Recent Advances in Functional Materials and 2D/3D Processing for Sensors and Electronic Applications 1825
178 Screen Printing to 3D Printing of Solar Cells—An Overview 1826
179 Formulation of UV Curable Resins Utilized in Vat Photo Polymerization for the Additive Manufacturing of Gun Propulsion Charge in 3D Printers (Update) 1836
180 Relation Between Temperature Dependence of Gate Insulator and Magnetic Energy Effect of Thin Film Transistor Without Channel Layer 1846
181 Printed Flexible Sensors Functionalized with TiO? Nanowires for Room Temperature CO? Gas Sensing 1855
Part XLIV Recent Developments in Biological, Structural and Functional Thin Films and Coatings 1867
182 Advances in Dry Metal Forming Using Volatile Lubricants Injected Through Laser-Drilled Microholes 1868
183 A Thermoelectrically Based Approach to Reduce Adhesive Wear During Blanking 1881
184 Oxidation Kinetics of Palladium 1896
185 Characterization of Rubber Seed Oil Modified for Biolubricant Feedstock Application 1911
186 Development Status and Suggestions of Refractory Materials for Carbon Calcining Equipment 1922
187 Preparation and Uniformity Analysis of Sol–Gel TiO? Thin Films 1931
Part XLV Solar Cell Silicon 1938
188 Dislocation-Based Thermodynamic Models of V-Pits Formation and Strain Relaxation in InGaN/GaN Epilayers on Si Substrates 1939
Part XLVI Solid State Diffusion Bonding of Metals and Alloys 1947
189 Diffusion Bonding of AgC–Cu Bi-layered Electrical Contacts 1948
190 Effect of Hydrogen Addition on the Diffusion Bonding Behavior of Titanium Alloys 1957
191 Solid-State Diffusion Bonding of Glass-Metal for the International Thermonuclear Experimental Reactor (ITER) Diagnostic Windows 1964
192 Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering 1974
Part XLVII Ultrafine-Grained and Heterostructured Materials (UFGH XI) 1982
193 Deformation Mechanism and Mechanical Properties of Nano/Ultrafine Grained and Heterogeneous Fe–17Cr–6Ni Austenitic Steel 1983
194 Effect of Severe Plastic Deformation on the Mechanical Properties of Al6061 Alloy 1991
195 Enhanced Mechanical Properties of Nano/Ultrafine-Grained Structure Formed by Martensite Reversion in 18Cr–8Ni Austenitic Stainless Steel 1995
Part XLVIII Use of Large Scale Facilities to Understand the Physical Metallurgy of Fe-based Alloys 2002
196 In Situ Synchrotron X-Ray Diffraction Stress Analysis During Laser Surface Line Hardening of Samples with Specific Geometric Features 2003
Author Index 2015
Subject Index 2023
Erscheint lt. Verlag | 13.2.2020 |
---|---|
Reihe/Serie | The Minerals, Metals & Materials Series | The Minerals, Metals & Materials Series |
Zusatzinfo | XXVIII, 2170 p. 1174 illus. |
Sprache | englisch |
Themenwelt | Technik ► Maschinenbau |
Wirtschaft ► Betriebswirtschaft / Management ► Logistik / Produktion | |
Schlagworte | 2020 TMS Annual Meeting, San Diego • conference proceedings • materials engineering • Materials Science • Minerals, Metals, & Materials Society |
ISBN-10 | 3-030-36296-5 / 3030362965 |
ISBN-13 | 978-3-030-36296-6 / 9783030362966 |
Haben Sie eine Frage zum Produkt? |
![PDF](/img/icon_pdf_big.jpg)
Größe: 62,2 MB
DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasserzeichen und ist damit für Sie personalisiert. Bei einer missbräuchlichen Weitergabe des eBooks an Dritte ist eine Rückverfolgung an die Quelle möglich.
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.
Zusätzliches Feature: Online Lesen
Dieses eBook können Sie zusätzlich zum Download auch online im Webbrowser lesen.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich