Functional Materials Research II

Preface
Chapter 1: Structural Materials, Functional Metals and Alloys
The Addition of Zr in Nickel-Based Inconel 718 Superalloy to Prevent Hot Cracks Propagation
Research of Deformation Law on High Manganese Steel with Different Alloy Composition
Research on the Friction and Wear Properties of Magnetorheological Fluids
Microstructural Evolution of TP347H upon Long-Term Service in Power Plants
Effect of Heat Treatment on Microstructural Evolution of 13Cr Martensitic Stainless Steel
Microstructural Evolution of Super304H Steel upon Long-Term Aging
Research Status of Copper Foil Surface Treatment and Development of Novel Process
Effect of Aging on the Creep Properties and Microstructural Evolution of P92 Steel
Corrosion Inhibition on Mild Steel Using PFOA Additives
Effect of Tin Additions on the Anti-Tarnish Properties of Sterling Silver Alloy
Fine Tungsten Powder Obtained with Blue Tungsten Oxide through the Hydrogen Reduction
Effects of the Processing on Mechanical Properties of High-Strength Structural Steel HG785D
Liquid-Liquid Phase Separation in Quenched Fe71Cu10P10B9 Multi-Component Alloy
Effects of Sm and Zr Addition on the Microstructure and Mechanical Properties in Mg-Cu Alloys
Computational Investigation of Interfacial Cracks Changes of TiAl Alloy
Application of Magnetic Ionic Liquids
Experimental Study on the Impact of Macrosegregation Formation of the Al-Bi Hypermonotectic Alloys
Numerical Study on the Impact of Cooling Rate on the Solidification of Al-Bi Hypermonotectic Alloys
Effect of Ti Content on Microwave Absorbing Properties of Nd-Fe Alloys
Improved Mechanical Properties of AZ31 Alloy Fabricated by Multi-Directional Forging
Preparation of a Light-Weight MgCaAlLiCu High-Entropy Alloy
Microstructure and Mechanical Properties of Ti-Nb-Zr Alloys Prepared by Spark Plasma Sintering
Numerical Simulation of Stress Distribution of AZ31B Magnesium Alloy/LY12 Aluminum Alloy Diffusion Welded Joint
Enhanced Mechanical Properties of Ti(C,B)-Based Cermets with Multi-Component AlCoCrFeNi High-Entropy Alloys Binder
Modeling the Hot Deformation Behavior of Ti-50.8%Ni Shape Memory Alloy
Simulation of the Effect of Second Phase Particles in Different Shapes on Grain Growth of Mg Alloy by Phase Field Methods
Effect of Heat Treatment on the Microstructure of Cu-Cr-Zr Alloy
Investigation of Microstructure and Deformation Behavior of a Mg-Gd-Y Alloy Processed by ECAP and Aging Treatment

In Situ Investigations of Structures Evolution of Mg Doped Zn4Sb3
The First Principle Studies on the Ferromagnetic Shape Memory Effect of Ni2YIn(Y=Fe, Co) Heusler Alloys
Microstructures and Properties of Ti-25Nb-15Zr Alloy for Spectacle Frame
Microstructure, Texture and Mechanical Properties of Mg-Sn-Zn Alloy Sheets Processed by Extrusion and Hot Rolling
Synthesis, Magnetic and Electromagnetic Absorption Properties of Amorphous Core-Shell Fe-B@SiO2 Submicrospheres
The Strength-Ductility Balance of an Ultrafine-Grained Medium-Carbon Steel Produced by Severe Plastic Deformation
Enhanced Interfacial Bonding Properties in Non-Equilibrium State between Aluminum Matrix and Ultrafined Ni-Nb Glassy Particulate Reinforcements
Structure and Performances of 7075 Aluminum Alloy Surface Subject to Hot-Dip Zinc
Crystallization Kinetics in Cu64.5Zr35.5 Binary Metallic Glass
Magnetostructural Coupling in Mn-Rich Heusler Mn-Ni-In Melt-Spun Ribbons
Compositional Dependent Crystal Structure in NiMnGa Matensite
Numerical Study of Vibro-Acoustic Performance of Composite and Sandwich Shells with Viscoelastic Core
High Frequency Electrical Properties of Fe/SiO2 Composites by Pressureless Sinter
Chapter 2: Ceramics, Nano- and Inorganic Functional Materials
Effect of Structure on Refractive Index for SiO2-B2O3-Ta2O5-ZrO2-Na2O System Glass
Thermal Analysis Kinetics of Pd-Doped SiO2 Organic-Inorganic Hybrid Material
TiO2 Nanoparticles Synthesized with Ti(SO4)2 as Precursor via the Hydrothermal Method and their Optical Absorption Properties
Fabrication of g-C3N4 Microspheres without Template via Microwave Heating Method
The Tight-Binding Calculation Research of the Silicene Structure
Research on the Effect of High-Temperature Melting β-SiC by Raw Materials and Power Supply
Glutathione-Directed Green Synthesis of Ag Nanoclusters with Highly Fluorescence
Preparation and Optical Properties Research on Graphene Quantum Dots
Preparation and Properties of β/α SiC Composite Ceramics
A Review - The Properties and Applications of Nano-Structured Titanium Oxide Materials
Facile Fabrication of Bimetallic PtCo Nanoparticles Supported on Three-Dimensional Reduced Graphene Oxide by Ultrasonic-Assisted Method for Oxygen Reduction Reaction
Synthesis, Characterization and Properties of PANI/(La-Nd Doped BaFe12O19) Composites
Fabrication and Characterization of SiO2/TiO2 Nano-Hybrid Particles
Study on Wet-Grinding Preparation of Micro-Nano β-SiC
Inductive Heating Property of Superparamagnetic Graphene Nanosheets-Fe3O4 Nanoparticles Hybrid in an AC Magnetic Field for Localized Hyperthermia
A Facial Route for Preparation of Hydrophobic Nano-Silica Modified by Silane Coupling Agents
Lattice Structure and Magnetic Behavior of Ga Ion Doped Multiferroics CaMn7O12
Green Synthesis of Monodispersity Gold Nanoparticles with Dextran
Preparation and Calcination Temperature Optimization of La1-xSrxCo1-yFeyO3 for Removing NOx Effectively
An Efficient Method to Form TiO2/CdS Nanotube Arrays Using Anodic Aluminum Oxide (AAO) Templates
Density Functional Study on the Configurations of Nen(n=2~36) Clusters
Remarkable Sunlight Photocatalytic Activity due to Synergetic Effect of ZnO with Cu
Convenient Route to Cu-Ag Bimetallic Nanoleaflets with High Content of Cu and their Electrochemical Properties
Effects of Na-Doping on Structure and Magnetic Properties of LaCoO3
Spin Diffusion in the Finite Magnetic Heterojunction
Collagen-Templated Biomimetic Synthesis, Characterizations and Photocatalytic Studies of Anatase Ce/TiO2
Synthesis and Characterization of Nd-Doped ZSM-5 Zeolite from Diatom Mud
Spin Filter and Negative Differential Resistance in Carbon-Based Device with Defects
Preparation and Tensile Property of Nanostructured Cu-Ag Alloy with Bimodal Grain Size Distribution
Preparation and Characterization of SO42-/Fe-Al-Activated Solid Acid Catalyst
Chapter 3: Composites and Polymer Functional Materials
Evaluation of the Aging Behavior of High Density Polyethylene in Thermal Oxidative Environment by Principal Component Analysis
Study on the Thermal Stability of Expanded Graphite/Stearic Acid Composite Phase Change Materials
Effects of Air Humidity on Properties of JO-9159 Explosive by Molecular Dynamics Simulation
Thermal Properties of Carbon Fiber Reinforced Mullite Composites Derived from Sol-Gel
Effect of Printing Temperature on Mechanical Properties and Surface Quality of Photosensitive Resin Rapid Prototyping Parts
Effect of Mechanical Processing on Intrinsic Stress and its Distribution in Polycarbonate Screw Cap
Molecular Dynamics of the Assembly Modes of the Oligothiophene Polymers with Different Chain Lengths
Self-Healing Polymeric Materials
The Properties of Polyimide Fibers Modified by Functionalized Muti-Wall Carbon Nanotubes Based on Friedel-Crafts Acylation
Prediction and Analysis on Chemorheology of MeHHPA/Hydantoin Epoxy Resin
Low-Working-Temperature and High-NO2-Sensing Properties of SnO2/PANI Hybrid Material Sensors
Pronounced Visible Light Photocatalytic Activity Obtained from Coupling of TiO2 with Metal Organic Macromolecule

In Situ Synthesis of Size-Controlled Silver/Poly(Methyl Methacrylate) Nanocomposite
Enhanced Thermal and Mechanical Properties of Epoxy Composites by Spherical Silica with Different Size
Effect of Cellulose Crystal Content on the Mechanical Property of Nano-Crystalline Cellulose/Lignin Composite Fibrous Film
Ultrasonic Effect on Fabrication of Intercalated MgAl-LDH/PVA Nanocomposites via Exfoliation-Adsorption Route
Design and Preparation of Smart Adaptive Structure Made with SMA-SMP Composite
A Technology of Composite Reinforced Infiltration
Remarkable Mechanical and Thermal Increments of Epoxy Composites by Graphene Nanosheets and Carbon Nanotubes Synergetic Reinforcement
Thermally Conductive Nanocomposites Based on Epoxy Modified with SiC and POSS
Effect of Addition on Oxidation Resistance of Ti3SiC2 Matrix Composites
Microstructure and Thermal Physical Properties of a β­SiCp/Al Composite for Electronic Packaging Produced by Powder Metallurgy
Dynamic Thermal Mechanical Behaviors and Mechanical Properties of Reversible Thermochromism Wood-Plastic Composite
Chapter 4: Semiconductors and Materials for Electronics and Optoelectronics
The Influence of Lattice Vacancy on Electrical and Optical Properties of Mg2Si
Characterization of MoO3 Solution Prepared Using Bath Deposition
Effects of Charge Compensators on Structure and Luminescent Properties of Microwave Synthesized CaMoO4:Eu3+ Red Phosphors
Morphology Control and Photoluminescent Properties of Bundled ZnO Nanorods Array Based on Silicon Nanoporous Pillar Array
Synthesis and Photoluminescence Properties of Sc0.88-xLu0.05VO4:Eu3+0.07,Bi3+x Red Phosphor
Preparation and Luminescence Properties of Dy3+ Doped Sr3Lu(PO4)3 as a New Single Phase White Light Emitting Phosphor
Up-Conversion Luminescence Properties of Ho3+ Doped and Yb3+/Ho3+ Co-Doped Y2WO6 Phosphors
Synthesis and Luminescence Properties of a Blue-Emitting Sr3NaLu(PO4)3F:Eu2+ Phosphor
Synthesis, Crystal Structure and Luminescence Property on Cabazoly-Based Zinc Metal Organic Frameworks
Simplified Synthesis and Luminous Mechanism of Eu2+-Doped α-Si3N4 Nanowires with Strong Green Luminescent Properties
Chapter 5: Functional Materials for Energy Production and Energy Storage
Synthesis of MoSe2-MoO2@Biomass-Derived Honeycombed Carbon Composite and its Application in LIB
A Facile In Situ Synthesis of Carbon Supported Nickel Phosphide (Ni5P4@C) and Application as Hydrogen Oxidation Reaction Catalyst in Alkaline Electrolyte
The Effect of Calcination Temperature on Electrochemical Performance of Porous LaMnO3 Catalyst in Al-Air Battery
Facile Synthesis of Electrospun LiNi0.5Co0.2Mn0.3O2 Nanofiber as High-Performance Cathode for Lithium-Ion Batteries
Current Development of Key Materials for Low Temperature Fuel Cells
NiMn2O4 Nanosheet Arrays with Controlled Mass Loading as Pseudocapacitor Electrodes
Synthesis of MIL-125/Graphene Oxide Composites and Hydrogen Storage Properties
Shuttle-Like CuO as High-Performance Anode Materials for Lithium Ion Batteries
Study of Pore Modality of Irradiated UO2 Fuel Assembly
Preparation and Electrochemical Properties of LaMnO3 Powder as a Supercapacitor Electrode Material
Porous Carbon Derived from Metal-Organic Framework as an Anode for Lithium-Ion Batteries with Improved Performance
Density Function Theory Calculation of Crystal Properties and Electronic Structure of δ-Pu
SnO2 Nanoparticles for Lithium-Ion Batteries Prepared by Sol-Gel Method
Study on Al-BiCl3-Hydride Composites Hydrogen Generation Materials
Homogeneous Growth of Ni(OH)2 Nanoparticle on Carbon Nanotubes for High-Performance Supercapacitor Electrode Material
Electrochemical Performance of Spherical Li3V2(PO4)3/C Synthesized by Spray Drying Method
A Comparison of Different Ways of Mixing the Lithium Salt on the Electrochemical Properties for Li[Li0.2Mn0.54Ni0.13Co0.13]O2 Materials
Preparation of Co-B Alloy with the Assistance of the Sonication and its Electrochemical Properties
Metal-Organic Frameworks/Carboxyl Graphene Derived Porous Carbon as a Promising Supercapacitor Electrode Material
Peparation of 20 wt.% Pt0.5Pd0.5/C Nanoelectrocatalysts by Electroless and their Electrocatalytic Properties
Preparation of Nickel and Manganese Oxides Composite via Co-Precipitation Method and its Supercapacitive Performance
Preparation of Co-Ni Mixed Oxide/Graphene Composite and its Electrochemical Performances as Supercapacitor Material
Synthesis and Evaluation of a New Kind of Kinetic Hydrate Inhibitor
Chapter 6: Materials for Biomedical Application
Preparation and Drug Release Properties of a Novel PLA-PEG-PTX Pro-Drug
Network Connectivity in Icosahedra Medium-Range Order of Metallic Mg70Zn30 Alloy
Self-Toughness Porous Sodium Titanate Bioceramics Prepared via In Situ Grown Na2Ti6O13 Rods
Preparation of PMMA/Nano-Cu Antibacterial Plastic by In Situ Polymerization
Chapter 7: Materials for Application in Environmental Engineering
Fabrication and Water Treatment Application of High Efficient PbO2 Electrode
Facile Synthesis of CeMOFs-Graphene Oxide Composites for Photocatalytic Degradation of Methylene Blue
Problems and Prospects of Water-Supply by Ultrafiltration
Study on Photocatalytic Reduction of Cr(VI) by Fluorine-Doped TiO2
Hydrothermal Synthesis of Flower-Like CuO/ZnO/SiNWs Photocatalyst for Degradation of R6G under Visible Light Irradiation
Adsorption of Methylene Blue and Congo Red on Bentonite Modified with CaCO3
Adsorptive Removal of Ni(II) Ions from Aqueous Solution by Polyacrylic Acid/Attapulgite Composite Hydrogels
Effect of Mixing Ratio and Doping Acid on the Photocatalytic Properties of PANI-BiVO4 Composites
The Role of Bicarbonate in Ion Speciation Plots in DEAB and Blended MEA-DEAB Systems, an NMR Study
Chapter 8: Thin Film, Membrane and Coating Materials
Preparation and Oxidation Properties of Carbon/Carbon Composites with the Antioxidant SiC/NiCS Coating
Palladium-Silica Organic-Inorganic Membrane Materials via a Sol-Gel Process: Preparation and Properties Calcined under H2 Atmosphere
Structure and Properties of Chitosan and Polyvinyl Alcohol Blend Film
Electroless Deposition of NiMoB Diffusion Barrier Layer Film for ULSI-Cu Metallization
Plasma-Enhanced Atomic Layer Deposition of GaN Thin Film at Low Temperature
Effects Studying of Annealing to Mechanical Properties Carbon-Doped Ti-O Films Synthesized Using CO2 Gas
Fast Thermal Annealing of CH3NH3PbI3-xClx Films for Improving Hybrid Photovoltaics
Research on the Properties of Sol-Gel Deposited WO3-NiO Thin Films
The Effects of the Carrier Concentrations on the Hall Mobilities of ZnO:Al Thin Films Deposited by Magnetron Sputtering
Radio Frequency (RF) Magnetron Sputtered Barium Strontium Titanate (BST) Thin Film
Preparation of Coated ZrSiO4-ZrB2 Using Sol-Gel Method and its Oxidation Resistance
ZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation Process
Application of Mg-Al Layered Double Hydroxides Composite Fillers in the Water-Based Heat Insulation Coating
Hot-Press Sintering of the W-40wt.%Cu Composite Tape-Casting Film
Effect of Diffusion-Temperature on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/Al Thin Film/1060 Al Joints
The Influences of Frequency on the Fabrication and Structural Studies of Micro-Arc Oxidization Ceramic Films Formed on Pure Titanium
Microstructures and Magnetic Properties of CoPt-C Nanogranular Films
Rapid Preparation of YBCO Coated Conductor by Chemical Solution Deposition
Structural and Ferromagnetic Properties of Ho-Doped BiFeO3 Films
Neutral Molten Salt-Bath Carburizing of Ti6Al4V Alloy with Nanocrystalline Surface Layer at Low Temperature Assisted by Surface Mechanical Attrition Treatment
Modification of VO2 Nano-Powders by Stearic Acid and its Mechanism
Preparation and Properties of Nanocomposite MWCNTs/Polyamide Reverse Osmosis Membrane for Desalination by Interfacial Polymerization
Chapter 9: Building Materials
Preparation and Characteristics of Light Foam Cement
Influencing Factors of Setting Time about Magnesium Phosphate Cement
Experimental Study on Strain and Damage Inspection of Cementitious Composites In-Filled with Graphene Nanoplatelets
Effects of Cement Additives on Alinite Cement-Based Materials from Municipal Solid Waste Incineration (MSWI) Fly Ash
Influence of Concrete Synergist on Performance of Stone Chip Concrete
Research on the Foamed Concrete with High Volume Fly Ash
Preparation and Composition Optimization of Low-CO2-Emission Cement Containing Belite, Calcium Sulfoaluminate and Ferrite
Influence of Physical Strengthening Technology on the Properties of Recycled Coarse Aggregate
Research Status and Development Trend of High Sand Filling Materials
Nano-Engineered Strong, Durable and Multifunctional/Smart Concretes
Thermal Stability of Geopolymer - Sr Contaminated Zeolite A Blends