Safety and Reliability of Complex Engineered Systems

Luca Podofillini, Bruno Sudret, Bozidar Stojadinovic, Enrico Zio, Wolfgang Kröger

Preface, Conference organization, Introduction, METHODOLOGY AREAS, Accident and incident investigation and modelling Traffic accidents: Random or pattern occurrence?, Accident analysis of Bus Rapid Transit units in Mexico City, Accident analysis by logic programming technique, Modeling of traffic safety indicators on Polish national road network, Learning from text-based close call data, Balancing the risk between railways and roads, Accident and incident investigation and modelling in critical infrastructure, Research on socio-technical system functional variability based on functional resonance accident model, Comparative risk assessment, Regionalized risk assessment of accidental oil spills using worldwide data, Comparison of Dutch and Russian standards for calculating physical effects of hazardous substances, Import-adjusted fatality rates for OECD countries caused by fossil fuel accidents, The use of Multidimensional Comparative Analysis in the choice of means of transport for the army, Comparative risk assessment for fossil energy chains: Severe accidents triggered by natural hazards, Crises and emergency management, What can we learn about “engineering thinking in extreme situations” from the testimony by the Fukushima Dai Ichi plant manager?, Safety management using RBPS to achieve excellence in Petrobras contracts, Issues concerning identification of critical infrastructure systems within the Baltic Sea area, Bridging the gap between long-term planning and short-term requirements: A risk-based perspective, Organised behaviour in the Swedish fire and rescue service—a case study, Computational techniques for the approximation of total system resilience, Enhancing organizational resilience through virtual communities of practice, Emergency Response Plans using time scheduling to anticipate the mission time deviation, Human behaviour in disaster situations: A paradigm change, Integration of resilience capabilities for Critical Infrastructures into the Emergency Management set-up, Planning for crisis response: The case of the population contribution, Resilience in a multilevel crisis governance context: A tale of joint implementation of community, regional, national and EU response capabilities, Developing a tool to assess trainees during crisis management training for major risks, Improvement of crisis exercise by the development of scenario design, Recovery of urban socio-technical systems after disaster: The reactive method of planning and implementation, IT contingency planning for cyber disasters, Preparedness of critical infrastructure subjects in energy sector for crisis situations, Motivating factors towards willingness to contribute in collaborative tasks: A crisis cooperation perspective, Competent crisis plan for crisis management of municipalities and complex facilities, Comprehensive approach: An appropriate tool to gain security in the new wars and complex emergencies?, DispAtmo project: A framework for crisis management, On a new regulation for municipal emergency preparedness in Norway, Quantitative risk assessment, Probabilistic analysis for the handling of radioactive material, RAMI and PSA application for efficiency of fusion device, A Total Safety Management framework in the case of a major hazards plant producing pesticides, An approach to assess the safety of automatic dependent surveillance systems, considering aspects of integrity in positional data based on computational simulation, What is a ship? Ship categories and application of AIS data and accident statistics for the normalization of ship risk, Probabilistic risk assessment considering parameter and model uncertainties, Probabilistic resilience assessment of civil systems: Analysis and validity of the PEER framework, Probabilistic safety assessment of cold shutdown and refuelling states: Method development and plant operating states definition, From HazOp study to automatic construction of Cause Consequence Diagrams for frequency calculation of hazardous plant states, Dust explosion of solid/solid mixtures: Application to nuclear decommissioning, Not losing to the rain: What I learned when I learned about Onagawa, Risk assessment of oil and gas facilities during operational phase, Combined use of composition of probabilistic preferences and entropy weighting for failure mode prioritization, Risk assessment and optimization for new or novel processes: Combining task analysis with 4D process simulation—framework and case study, Transient ignition modelling of gas leaks in enclosed modules, PSA contribution in development and application of severe accident management guidelines, Risk information for operational decision making in oil and gas operations, Application of fuzzy logic for safe autonomous subsea IMR operations, Technical issues of PSA for Korean multi-unit nuclear power plants, Automatic integration of a Fire PSA model in a Level 1 PSA, Quantifying system safety: A comparison of the SBOAT & Safety Barrier Manager tools, Quantifying operational risk exposure by combining incident, data and subjective risk assessments, Quantitative predictions of blowout events, A contribution to safety analysis of railway CBTC systems using Scola, Aircraft crash external events analysis: The impact of aircraft flight phases delineation on NPP risk assessment, Probabilistic design accidental load for fire accidents in offshore topside structures , Transport of dangerous goods—research on activities carried out by the Voivodeship Road Transport Inspectorate, Post Fukushima lesson learned for Probabilistic Safety Assessment, Probabilistic analysis of cascading events triggered by fire, Complex Human-Machine System unsuccess evolution analysis, Probabilities in safety of machinery—elements of a risk model and comparison with field data, Dynamic barrier management: A case of sand erosion integrity, Sensitivity analysis of critical assumptions and methods applied in Armenian NPP fire PSA model, Application of WinPRAISE code for secondary side piping break frequency assessment in PSA, Advanced Cryogenic Structural Collapse Analysis (CSCA)—Part I: Cryogenic flow modelling, A logic-perspective flaw identifying method under the STAMP framework, A quantitative risk assessment approach of IMA structure considering the cascading impact, Concept of railway transportation system resilience—an introduction, First applications of the OECD FIRE database within fire PSA for nuclear power plants in Germany, Recent and future activities of the OECD Nuclear Energy Agency Working Group on RISK assessment (WGRISK), Influence of storage conditions of liquid fuels on functional parameters in the processes of long–term storage, Integrated PRA methodology to advance fire risk modeling for nuclear power plants, Atmospheric dense gas dispersion models and their influence in the risk analysisstudies assessment in the scope of the standard CETESB P4.261, Airport operations safety assessment with the use of colored Petri nets, Fire safety barrier availability analysis, Advances in consequence modeling, Study of leakage of natural gas and distribution of explosive mixture in building, Big Data Risk Analysis for rail safety?, Characterization of the flammability of household materials subjected to high radiative flux, Station blackout and nuclear safety, Flight risk assessment in icing conditions based on multivariate extreme value theory, Statistical analysis of the risk of nuclear accidents: New data and extreme heavy tailed distributions, Dynamic reliability and PSA, Framework for assessing integrated site risk of small modular reactors using dynamic Probabilistic Risk Assessment simulation, Failure root causes analysis of complex systems—Dynamic Fault Tree approach, A comparison of Dynamic Event Tree methods: Initial results for a chemical batch reactor, Hybrid-pair modelling in dynamic reliability: Concepts, tool implementation and applications, Dynamic risk assessment of marine systems, Quantitative analysis of Dynamic Fault Tree by probabilistic approach, Quality assessment of the traffic flow management process in the vicinity of the airport, Risk control in the well drilling phase: BOP system reliability assessment, An entropy-driven method for exploring extreme and unexpected accident scenarios in the risk assessment of dynamic engineered systems, Foundational issues in risk assessment and management, On the appropriateness of using the ALARP principle in safety management, Risk—from concept to decision making, Reviewing the state of knowledge on the societal safety and societal security concepts—an initial modeling effort, Identifying scientific principles for the concepts of societal safety and societal security, Hazard/threat identification—using different creative methods to support, the Anticipatory Failure Determination approach, Risk management methodology for protecting against malicious acts—are probabilities adequate means for describing terrorism and other security risks?, From theory to practice: Itinerary of Reasons’ Swiss Cheese Model, Separating variability from uncertainty when treating critical assumptions in risk assessments, Risk in the safety sciences: Its economic foundations, its hyperbolic geometry, and its engineering methods, A framework for conceptualizing the performance of and assessing the risks to systems, Risk assessment under deep uncertainty: A methodological comparison, Maintenance modeling and applications, A decision on replacement policy of systems subjected to imperfect repairs using multi-objective genetic algorithms and discrete event simulation, Sparing for availability and sparing for confidence—use for cloud computing services, Integrated Logistic Support: RAM, preventive maintenance, inspection, spare parts and life cycle cost optimization based on dynamic programming method, A comparison of different grouping strategies for multi-component systems, Handling reliability big data: A similarity-based approach for clustering a large fleet of assets, A low-cost predictive maintenance approach for E/E/PE dependable system, An application of quasi Monte Carlo methods for the numerical assessment of maintenance strategies, Predictive maintenance of selected gas equipment using the RCM methodology, System dynamics modeling for multi-state systems, Value of information in life cycle management of flood defences, Maintenance of a deteriorating control system based upon controller reconfiguration, Modified periodic replacement with used items at stochastic failure: Focusing sustainability and profit advantages, Reliability modeling and innovative maintenance strategies for offshore wind farms, Long-term budget requirements for the replacement of bridges and hydraulic structures, Negotiation of extended warranties for medical equipment, Clustering condition-based maintenance for a multi-unit system with aperiodic inspections, A mathematical model for scheduling preventive maintenance and renewal projects of infrastructures, Enabling maintenance performance prediction by improving performance indicators, Assessing the potential for utilising the economies of scale by grouping, maintenance and renewal activities on water infrastructure, Development of a whole life cost model for offshore wind farms, Delayed maintenance modelling with speed restriction for railway section, RCM and barrier modelling—application of barrier analysis to railway rolling stock maintenance optimization, Optimization of load balance of man-hours in preventive maintenance planning with flexibility in date of execution, Concept of controlling for maintenance management performance: A case study of passenger transportation company, General framework about graphical analysis for operation management, A new preventive maintenance strategy for warranted products considering customer satisfaction, Synthesis of issue pertaining to the resilience of logistics systems, Mathematical methods in reliability and safety, Importance measures in time-dependent reliability analysis and system design, Optimization of SIL allocation for safety functions implemented over layers of protection, Structural reliability analysis of heat production subsystem considering changeable external conditions, Calculating the failure frequency of Boolean systems subject to common random shocks, Automatic fault tree construction via component and feature based modelling, Reliability analysis of conveyor belt with dependent components, Making importance measures robust, The estimation and prognosis of failure behaviour in product fleets within the usage phase—RAPP method, Probabilistic assessment of events sequences by a modular approach, Functional safety for safety-related systems: 10 common mistakes, Stochastic dynamic analysis and reliability evaluation for a heeling vessel rolling in random beam seas, Effects of link weights uncertainties in network community detection: Application to two electric power systems, A game-based optimization approach for fleet Condition-Based Maintenance oriented to mission reliability, Application of metamodel-based techniques for the efficient seismic analysis of structural systems, Stress-strength reliability estimation based on q-Exponential distribution, Community detection and infrastructure criticality, A study on a stopping criterion for active refinement algorithms in Kriging surrogate models, Time-dependent covariates in the Transformed Gamma degradation process, Fuzzy expert inference system for selected aircraft on-board unit reliability evaluation: Initial project analysis, Stochastic comparison in reliability analysis, Complex system safety and operation cost optimization, Bottleneck analysis of the gas transmission network using ProGasNet simulator, Safety integrity level-tool: Software calculation tool to determine the important safety parameters based on IEC 61508 standard, Proposal for improvement of a reliability growth model, Multistate system reliability models with independent and dependent redundancy application in port transport, Jump Markov Linear Systems for deterioration modeling and Remaining Useful Life estimation, Approach for evaluating the safety of a satellite-based train localisation system through the extended integrity concept, Reliability prediction for multi-failure-state products based on fuzzy Bayesian networks, Estimation for the parameters of the q-Weibull distribution by maximum likelihood and Particle Swarm Optimization, Reliability analysis of a small power supply system with Load Points operating in normal and emergency modes, A procedure to develop the EBEPU methodology merging PSA-based assumptions and BEPU method, An approach to address probabilistic assumptions on the availability of safety systems for deterministic safety analysis, Probabilistic approach of carbonation-induced corrosion initiation via a surrogate model, Probabilistic extension of failure net based FMEA, Maintenance strategy for transport systems telematics, The influence of wake fraction coefficient determination accuracy on the propulsion system operating parameters, Modeling of aircraft during take-off and landing operations using Artificial Neural Networks, Optimizing paths for networks with multi-objective functions, On data unavailability and file loss in coded data storage systems for the Cloud, On the probability of crossing the line—in wireless networks, The research of KD-tree based ICP algorithm for fast data searching in bank modeling, Layered complex networks fault propagation effects research based on cellular automata, New algorithm for calculation of Fussell-Vesely importance with application of direct partial logic derivatives, New PFD calculation method for complex scenarios—part 1: A hybrid method for handling maintenance mobilization time, The problem of sensor location for plant reconfiguration in nonlinear systems, System reliability, Modelling life extension of safety critical systems, Concurrent safety analysis: A method for information exchange between systems and safety engineers, Time-dependent PSA model for Emergency Power System of Nuclear Power Plant, Dependability analysis of level crossing systems using a fuzzy Dynamic Fault Tree approach, Smart grid substation availability assessment: Recovered MSS-based approach, An approach of reliability assessment of systems based on graphs models, Safety electronic systems reliability monitoring program in nuclear power plant, Reliability analysis of the controller architecture in software defined networks, Grid reliability assessment for short-term planning, Common cause failures in discrete dynamic models: Theory and applications in the Figaro modelling language, Reliability analysis of safety systems subject to Multiple Testing Levels, Modelling railway service reliability in the event of failures, Survival signature-based sensitivity analysis of systems with epistemic uncertainties, A framework of model predictive control for the safety analysis of an electric power microgrid, PFDavg and PFH formulas for SIS subject to partial and full periodic tests, Power utility automation cybersecurity: IEC 61850 specification of an intrusion detection function, Model-based systems engineering and failure analysis: Experience feedback, Reliability assessment of Wireless Sensor Networks for environmental detection, Concept reliability model of the passenger service at the Wroclaw Airport landside area, Reliability of maritime ferry technical system—Monte Carlo simulation assessment, Reliability of maritime ferry technical system—analytical assessment, RAM-C: A novel methodology for evaluating the impact and the criticality of assets over systems with complex logical configurations, Safety and reliability of data transmission over public networks, Advanced fault tree synthesis for systems with dynamic aspects, RAM based metrics for safety assessment of safety systems with application to ageing management, Reliability evaluation of power installation in NPP cooling system based on the Reliability Block Diagram, Impact of wind power on the reliability of electric power supply system, Supply chain vulnerability assessment methods—possibilities and limitations, System reliability of offshore gas turbine engines with erroneous data conditions, Reliability modelling of a hybrid car drive system with advanced Petri nets considering dependencies and aging, Analytical formulas of PFD calculation for systems with non-constant failure rates, Risk analysis and reliability improvement in spark ignition engines associated with sporadic failures, An evolutionary decision support system for the top event early detection, Environmental effectiveness ontology based method for enhancing FMECA, A novel genetic algorithm developed on a reduced search space for optimal redundancy allocation in Multi-State Series-Parallel Systems, Online reliability calculations of power systems with forecasted and real time weather influence, Reliability of large two-dimensional nanosystems, Reliability of the cut flowers’ supply chain, Network robustness analysis based on current road incident data, Building business cases for risk and reliability technologies, An application oriented layered index method for satellite constellation reliability evaluation, Study on life assessment technology for marine intermediate bearing, A novel model-based approach for failure modes and effects analysis, Reliability of phase mission linear consecutively-connected systems with constrained number of gaps, Component reliability allocation and demonstration test planning based on system reliability confidence limit, Monte Carlo simulation for RAMS applications, Improving performances of the AltaRica 3.0 stochastic simulator, Sequential Monte Carlo method to assess the availability of power station layouts with generator circuit-breakers, Assessment of the improvement achieved in RAMS by a FEV embedding a powertrain PHMS, A spark-based Monte Carlo parallel simulation approach for complex large systems reliability assessment, Modelling of maintenance and inspection policies for marine systems using Monte Carlo simulation and Delay-Time Analysis, Estimating the small failure probability of a nuclear passive safety system by means of an efficient Adaptive Metamodel-based Subset Importance Sampling method, Application of a maintenance engineering decision method for railway operation: Managing fleet performance, cost, and risk, Seismic reliability of urban water distribution networks, Harùspex: A suite to assess and manage ICT risk by simulating threat agents, Comparison of probability distributions for use in reliability and maintainability simulation, A Dynamic Fault Tree method for availability assessment of the repairable gas transmission system, Bayesian and statistical methods, Risk assessment of Arctic drilling waste management operations based on Bayesian Networks, Risk prediction and risk intelligence in aviation—the next generation of aviation risk concepts from PROSPERO FP7 project, A Bayesian method for thermo-electric power generation drought risk assessment, On Bayesian approaches for real-time crack detection, Comparison of Weibayes and Markov Chain Monte Carlo methods for the reliability analysis of turbine nozzle components with right censored data only, Response of rescue system to an extraordinary event, Using Bayesian Network analysis to determine the main accident risk factors in Spain, Age-dependent uncertainty in energy network reliability assessment, Bayesian Network-based model for bridge network management, Overview of methods to build Conditional Probability Tables with partial expert information for Bayesian Belief Networks, Enhanced Bayesian Network approach to sea wave overtopping hazard quantification, Robust Bayesian estimation of system reliability for scarce and surprising data, Validity analysis of reliability evaluation method under small sample and random censoring data, Reliability model with Wiener process based on Objective Bayesian, Maritime accidents risk prediction based on Bayesian Network with interval probabilities, Reliability data and reliability testing, Application of vendor data in assessment of Safety Instrumented Functions in the oil and gas industry, Contribution for detection of long-time product reliability problems in the use phase based on analysis of data gathered in online communities, Risk of morbidity and other comparisons after surgeries at different operation techniques, Temperature effect of constant amplitude fatigue test and accelerated life evaluation method based on energy parameter, A methodological proposal to meet analysis requirements with purified information through a logical work sequence and a decision tree in the field of maintenance management, A thermodynamic entropy based approach for fault detection and prognostics of samples subjected to corrosion-fatigue degradation mechanism, Impact of reliability data quality on risk-based decision making, Nonlinear accelerated degradation analysis based on the general Wiener process, Lithium-ion battery Remaining Useful Life prediction based on grey Support Vector Machines, Highly Accelerated Stress Screening efficiency analysis method study based on the theory of optimum, Extensive investigation of Calibrated Accelerated Life Testing (CALT), in comparison with classical Accelerated Life Testing (ALT), A review of safety valve reliability using failure fraction information, The life prediction on typical coatings of Printed Circuit Board through accelerated degradation modeling, Composite materials reliability assessment and comparison, Simulation based optimal design for accelerated degradation test plan with multiple stresses and multiple degradation measures, The research on the resistance to soldering heat of molded epoxy solid tantalum chip capacitor, Development and reliability testing of a new filtering algorithm for noisy data from flight data recorder, Efficiency comparison between step-down and step-up stress accelerated degradation tests based on Wiener process modeling, Effects of ZnO varistor degradation on the overvoltage protection mechanism of electronic boards, Analysis of variable Acceleration Factor in internal and external field salt spray tests, Reliability and availability optimization, Mixed Weibull distribution as best representative of forced outage distribution to be implemented in BlockSim, Optimization of distribution networks resilience based on costs and design changes, DTO “Design To Operability” of space survey complex system monitoring, Reliability and availability prediction calculations for ventilation in the Gotthard base tunnel, A new availability allocation method, Integrated model for dynamics and reliability of intelligent mechatronic systems, Interurban rail network robustness analysis: Case study of Iran, A bi-objective dynamic model for multi-state weighted k-out-of-n system reliability, Economic evaluation of small-scale LNG production system for shale gas recovery considering Life Cycle Cost with availability, Cost of reliability of the delivery in the last 100 meters, Proposition to use some logistics tools to analyse the economic costs of accidents, An Ordinal Optimization approach to the solution of homogenous redundancy, allocation for Multi-State Series-Parallel Systems, Integrated dynamic predictive maintenance planning with advanced deterioration and remaining useful lifetime estimation models, Production availability modeling of FPSO system using Stochastic Petri Nets, Modeling and optimization of a launcher integration process, Business Continuity Planning of Norwegian gas network, Integration and verification of confidence bounds in Monte Carlo reliability simulation, Mitigating the impacts of unreliable railway components on service availability and punctuality, An implementation of product lifecycle management in urban cable propelled transportation, K-out-of-N systems: Design, operation and preventive maintenance, Prognostics and system health management, Data analytics for concrete structural health monitoring in nuclear power plants, Unsupervised ensemble clustering for transients classification in a nuclear power plant turbine, Fatigue life prediction based on Artificial Neural Network, Operating time estimation of military vehicle diesel engine based on neural network, Electromechanical servomechanisms affected by motor static eccentricity: Proposal of fault evaluation algorithm based on spectral analysis techniques, Development of a fuzzy diagnostic model for Polymer Electrolyte Fuel Cells, Reliability analysis of nonlinear degradation processes with measurement errors, A method for on-line evaluating the accuracy of a particle filter-based prognostic approach, Fatigue life prediction under random amplitude loading spectra with shock, Application of interval-valued probabilities and unified scheme of Non-Homogeneous, Poisson Process models to software failure prognostics, Review and analysis of SCADA data-based methods for health monitoring of wind turbines, Prognostics Health Management: Perspectives in engineering systems reliability prognostics, An exponential smoothing extension method for restraining the end effect of local mean decomposition, Damage precursor based structural health monitoring and damage prognosis framework, Introducing Type 5 to prognostics and health management classification schemes, Residual lifetime estimation and electronic device, The continued development of the MFM suite and its practical application on a PWR system, Oil quality and system maintenance optimisation, Model-Based Fault Detection and Isolation of PEM fuel cells using Bond Graphs, Predicting Remaining Useful Life by fusing SHM data based on Extended Kalman Filter, Failure detection for flight control surface based on the information of electric actuator, Uncertain generalized Remaining Useful Life Prediction-driven predictive maintenance decision, Decision-making methods of Condition-Based Maintenance, Research on technological system of equipment prognostic capability verification, Uncertainty and sensitivity analysis, Resilience to hazards in district heating systems, Qualitative and quantitative analysis of uncertainties in the reliability analysis of field data within the product usage phase, Applications of global sensitivity analysis methods in civil engineering, Stochastic analysis of the lateral beam buckling of beams with initial imperfections, Main features of the tool SUSA 4.0 for uncertainty and sensitivity analyses, Development of a case study for Eco-Industrial Park deployment under uncertainty, Global sensitivity analysis based on a Monte Carlo simulation: A study based on a natural gas system, New uncertainty importance measure for probabilistic safety assessment, Line sampling approach for extreme case analysis in presence of aleatory and epistemic uncertainties, Copula-based sensitivity measures of computer experiments, Risk assessment of Dangerous Good Transportation using Fuzzy Bow Tie diagram analysis, Evaluating the impact of climate change on the risk assessment of Nuclear Power Plants, Propagation of uncertainty in railway signaling risk analysis, Model uncertainty, Sensitivity analysis of parameters influencing solute transport from a deep repository of spent nuclear fuel, Random Predictor Models for rigorous uncertainty quantification: Part 1, Advanced interval based Monte Carlo method for atmospheric dispersion model in risk assessment, Nonparametric estimation of distributions of order statistics with application to nuclear engineering, Model comparison and quantification of statistical uncertainties for annual maxima of ground snow loads, Intermittent Fault’s signification and formalization model, Comparison of uncertainty multilayer models of impact of teleinformation devices reliability on Information Quality, Coping with model uncertainty in optimisation of maintenance policy, Uncertainty quantification and decision making under uncertainty, Resilience analysis of Critical Infrastructures exposed to external disturbances and affected by uncertainty, Info-gap theory: An intuitive overview for engineering design and reliability assessment, Identification of the most critical pipes in the presence of imprecise information, Random Predictor Models for rigorous uncertainty quantification: Part 2, Robust design of inspection schedules by means of probability boxes for structural systems prone to damage accumulation, A discrete event simulation design for block-based maintenance planning under random machine usage, Water supply investment decision-making under climate change variability—New York City case study, Black swan events and property asset management: Redefining place and space on global organisations property decisions, Reliability analysis of Multi-State Systems using random set theory, Training and evaluation of a learning-based autonomous unmanned aircraft for collision avoidance: Virtual training data generation, Optimal risk regulatory policy in the development of a geological disposal facility, Reliability assessments and remaining life of pipelines subject to combined loadings using imprecise probabilities, What type of uncertainty is robustness referring to in Information Gap Decision Theory?, Uncertainty propagation for rockfall hazard modelling comparison of Monte Carlo propagation method and Hybrid approaches, Uncertainty and strength of knowledge in QRAs, An inference exchange and decision fusing model for separated surveillance units in safety-critical infrastructure, Human factors and human reliability analysis, Influence of local archetypes on the operability and usability of instruments in control rooms, Cognitive deficit analysis in routine tasks, as a strategy to reduce accidents and increase of industrial production, A dynamic approach to modeling dependence between Human Failure Events, Adapting Human Reliability Analysis from nuclear power to oil and gas applications, Use of aggressor profiling in cyber security risk assessments for industrial control systems, Operator discourse analysis as a tool for risk management, The role of data visualization in railway Big Data Risk Analysis, Laying the basis for resilient Human-Robot Interactions in future space exploration missions, Measures of orienting response for improving safety training, Protocol to evaluate the influence of stress on the task involving human types, behavior and health: An exercise proposal, Human Reliability Analysis to support operational planning of an experimental facility, Proof-of-concept accident diagnostic support for Sodium Fast Reactors, Application of a sim