Direct Methane to Methanol - Vladimir Arutyunov

Direct Methane to Methanol (eBook)

Foundations and Prospects of the Process

Vladimir Arutyunov (Autor)

eBook Download: PDF | EPUB

2014 | 1. Auflage
320 Seiten
Elsevier Science (Verlag)
978-0-444-63251-7 (ISBN)

Reviews more than 350 publications on high-pressure, low-temperature oxidation of methane and other gas phase hydrocarbons
Contains rare material available for the first time in English
Explains the reasons of previous failure and outlines the way forward for commercial development of the conversion technology
Presents a deep theoretical knowledge of this complex conversion process

Direct Methane to Methanol: Foundations and Prospects of the Process offers a state-of-the-art account of one of the most interesting and potentially commercial technologies for direct conversion of natural gas into valuable chemicals. The book thoroughly explains the complex and unusual chemistry of the process, as well as possible applications for direct methane to methanol (DMTM). It covers topics involving thermokinetics, pressure, direct oxidation of heavier alkanes, and more, and provides detailed appendices with experimental data and product yields. This book provides all those who work in the field of gas processing and gas chemistry with the theory and experimental data to develop and apply new processes based on direct oxidation of natural gas. All those who deal with oil and natural gas production and processing will learn about this promising technology for the conversion of gas into more valuable chemicals. Reviews more than 350 publications on high-pressure, low-temperature oxidation of methane and other gas phase hydrocarbons Contains rare material available for the first time in English Explains the reasons of previous failure and outlines the way forward for commercial development of the conversion technology Presents a deep theoretical knowledge of this complex conversion process

Chapter 1

Historical Review on the DMTM

Abstract

This chapter offers a short historical review on the investigations connected with studying of DMTM from the beginning of the last century and up to now. Motivation for these investigations, typical experimental conditions, common drawbacks of some of the works, and the structure of the monograph are discussed.

Keywords

High-pressure oxidation of methaneMethanolOxygenatesSelectivityYield

As far back as the beginning of the last century, Bone revealed the principal possibility of producing valuable oxygenates by direct oxidation of methane [8–10]. However, a real interest in the problem arose in the 1920–30s in connection with the emergence of DMTM-based industrial processes [11,12]. Another stimulus was to verify some of the then theoretical concepts concerning the mechanism of the gas-phase oxidation of hydrocarbons [13]. At the beginning of the 1930s, several different groups of researchers [14–18] have almost simultaneously demonstrated the possibility of achieving a high selectivity of methanol formation in the high-pressure gas-phase oxidation of methane. This gave an impetus to subsequent efforts to increase the yield of oxygenates and to develop industrial processes for their production by the direct oxidation of methane and heavier alkanes. Along with some early patents on the catalytic oxidation of methane to oxygenates [19], there have appeared the first patents on the high-pressure gas-phase partial oxidation of methane [20,21].

In the 1930s, thorough investigations of DMTM were performed by Newitt and co-workers [16–18,22,23]. They studied gas-phase oxidation of methane and other hydrocarbons at high pressures to elucidate a number of fundamental issues concerning the role of alcohols in the oxidation of hydrocarbons. These works were first to demonstrate the possibility of achieving high yields of alcohols and aldehydes in the direct oxidation of hydrocarbons. Later, it was shown that methanol is also formed at atmospheric pressure, even during the induction period [24]. Although the selectivity of methanol formation for some of the stages of methane oxidation at atmospheric pressure attains ∼20%, the integrated selectivity does not exceed 5% [25]. Thus, high pressure is a key factor in providing significant methanol yields.

Already in the first works in the 1930s, the optimal conditions for DMTM were identified: high pressure (∼100 atm) [16,17,26], moderate temperature (400−500 °C) [27], and low oxygen concentration [15,27]. The attainable selectivity of methanol was demonstrated to be as high as 60% [16,17]. A number of kinetic features of the process were also established: the methanol selectivity decreased sharply with increasing oxygen concentration [15,27], and a high CO/CO2 ratio in the products was observed [10]. Since then up to now, the main objective of most studies has been to determine conditions that would provide high and stable yields of the target products, so as to make DMTM competitive with other technologies.

By the middle of the last century, the partial oxidation of methane and, later, propane, butane, and mixtures thereof extracted from oil-associated, crude stabilization, and processing gases became a widespread petrochemical process in the United States [28]. The subsequent decline of this technology in the late 1950s was associated with the rapid progress of competing technologies based on the preconversion of hydrocarbons into syngas and subsequent catalytic synthesis of target products and with the development of the market of propane and butane as domestic fuel and raw material for many petrochemical processes. Another factor that contributed to this was the difficulty of extracting individual components from a complex mixture of products of the nonselective gas-phase oxidation of C3−C4 hydrocarbons, which were used in the then technologies. Important, in our view, is the fact that the partial oxidation technology of that period was based solely on empirical knowledge. Small scope of fundamental research and the lack of clear understanding of the mechanism became a serious obstacle to the improvement of the process.

Although studies on methane partial oxidation have never stopped and continued beyond this period, and even attempts to introduce new industrial processes have been made (see, e.g., [29]), none of them found practical implementation. At the same time, under the influence of the theory of branched-chain reactions, developed by Semenov and his co-workers [30], a new understanding of mechanism of the oxidation of hydrocarbons began to take shape. Results of more than half a century of research in the oxidation of hydrocarbons and new concepts of hydrocarbon oxidation mechanism were summarized in a fundamental monograph by Shtern [13].

In the mid-1980s, interest in the direct production of oxygenates from methane rekindled due to the rapid growth of the role of natural gas in the global energy mix, the oil crisis of the 1970s, and the acute need in a clean motor fuel in major industrial countries. Methanol was considered as a convenient raw material for production of components of ecologically clean motor fuels and even as a potential fuel, features that boosted interest in technologies of its production from nonoil rough materials. To some extent, this interest was excited by several experimental studies that reported very high yields of methanol in the DMTM process [31,32].

This interest induced a number of reviews on the subject [31,33–38]. However, these reviews primarily dealt with the catalytic oxidation of methane, reflecting the traditional focus on catalytic technologies and the lack, at that time, of a clear understanding of the real mechanism of the DMTM process. With the exception of [31], they contained no new original data or conclusions, being based predominantly on compilations of previous results.

Since then, dozens of experimental works have been published. The most evident and widespread drawbacks of some of these papers, especially in the early period, which significantly complicate their analysis, are an incomplete presentation of the experimental conditions and the practice of simultaneously changing several experimental parameters. It may be supposed that, in the absence of clear ideas about the reaction mechanism, some researches practiced “random” (rather than time-consuming systematic) search for optimal conditions of methanol production. Such approach significantly depreciates the results and, in some, cases makes their analysis and inclusion in the common pool of DMTM data practically impossible.

Another common drawback of some of the works consists in attempts to make promising technological predictions based solely on a limited set of their own experimental results, without serious analysis, comparison with available data, or treatment within the framework of theoretical concepts. However, the claimed high parameters of the process are usually poorly reproducible, if at all. In addition, discrepancies between the results of experiments performed under very close conditions in the absence of a serious analysis of the underlying reasons give rise to the skeptical attitude regarding the practical applicability of DMTM.

A vast body of interesting but contradictory data published in recent years and a new level of theoretical understanding of the DMTM mechanism motivated us to perform a new comprehensive analysis of the process. Such analysis showed that the potentialities of the DMTM process is high enough but needs serious elaboration.

According to cost assessments, made some time ago, for the DMTM process to be competitive with traditional technologies, it should provide a selectivity of methanol formation (or the sum of valuable organic products) in excess of 77% at a reasonable conversion of methane, no less than 5% [39]. However, at present, for most of the experiments that can be reproduced at the industrial level, at a methane conversion higher than 5%, the methanol selectivity SCH3OH does not exceed 50% (Appendix I). Nevertheless, even these results open possibilities for some interesting technological applications of the processes. Although several works reported significantly higher values of SCH3OH, up to 60% [40,41], 80% [42,43], and even >90% [44] (see Appendix I), the authors of [45] and others failed to reproduce them. Possible reasons for such significant discrepancies will be discussed below.

By now, dozens of experimental studies on the gas-phase partial oxidation of methane, as well as ethane and heavier homologues, to oxygenates has been published. Facilities with various types of reactors, including static reactors, well-stirred flow reactors, and plug flow reactors of various sizes with a diameter of 5–30 mm operating at a flow rate from a few liters to 1000 m3/h, have been used. The pressure was varied up to thousands of atmospheres. Along with the main parameters of the process, such as pressure,...

Erscheint lt. Verlag	30.1.2014
Sprache	englisch
Themenwelt	Naturwissenschaften ► Chemie ► Technische Chemie
	Technik ► Elektrotechnik / Energietechnik
	Wirtschaft
ISBN-10	0-444-63251-4 / 0444632514
ISBN-13	978-0-444-63251-7 / 9780444632517

Haben Sie eine Frage zum Produkt?

PDF (Adobe DRM)
Größe: 21,6 MB

Kopierschutz: Adobe-DRM
Adobe-DRM ist ein Kopierschutz, der das eBook vor Mißbrauch schützen soll. Dabei wird das eBook bereits beim Download auf Ihre persönliche Adobe-ID autorisiert. Lesen können Sie das eBook dann nur auf den Geräten, welche ebenfalls auf Ihre Adobe-ID registriert sind.
Details zum Adobe-DRM

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen eine Adobe-ID und die Software Adobe Digital Editions (kostenlos). Von der Benutzung der OverDrive Media Console raten wir Ihnen ab. Erfahrungsgemäß treten hier gehäuft Probleme mit dem Adobe DRM auf.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen eine Adobe-ID sowie eine kostenlose App.
Geräteliste und zusätzliche Hinweise

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

EPUB (Adobe DRM)
Größe: 15,1 MB

Dateiformat: EPUB (Electronic Publication)
EPUB ist ein offener Standard für eBooks und eignet sich besonders zur Darstellung von Belletristik und Sachbüchern. Der Fließtext wird dynamisch an die Display- und Schriftgröße angepasst. Auch für mobile Lesegeräte ist EPUB daher gut geeignet.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Print-Ausgabe

Buch | Hardcover

169,95 €