Piers, Jetties and Related Structures Exposed to Waves
Guidelines for hydraulic loadings
Seiten
2024
|
2nd Edition
Emerald Publishing Limited (Verlag)
978-1-83549-717-3 (ISBN)
Emerald Publishing Limited (Verlag)
978-1-83549-717-3 (ISBN)
Piers, Jetties and Related Structures Exposed to Waves, Second Edition delivers guidelines for engineers to analyse and optimise pier and jetty designs. It is essential reading for maritime designers and consultants tasked with analysing, designing and constructing piers and jetties.
Piers, Jetties and Related Structures Exposed to Waves, Second Edition delivers guidelines for engineers to analyse and optimise pier and jetty designs. With ports now having to account for larger ship sizes, there is an increasing need for these marine structures to be longer and constructed in significantly deeper water. Increased construction costs, structures in exposed locations, and health and safety concerns are just some of the aspects that a coastal engineer must consider when designing and building new maritime structures.
This fully revised and updated edition provides full descriptions of the process covering:
guidance on hydraulic design, including design wave conditions, prediction of scour and vessel mooring loads
new methods (developed from extensive laboratory testing) for the prediction of wave loading, including forces on the underside of jetty decks
new equations, graphs and coefficients for wave loadings
updated coefficients for impulsive loads
revised discussion on effects of trapped air
expanded discussion on scaling loads from hydraulic models.
With a vastly experienced team with associations to HR Wallingford, Piers, Jetties and Related Structures Exposed to Waves is the essential reading for maritime designers and consultants tasked with analysing, designing and constructing piers and jetties.
Piers, Jetties and Related Structures Exposed to Waves, Second Edition delivers guidelines for engineers to analyse and optimise pier and jetty designs. With ports now having to account for larger ship sizes, there is an increasing need for these marine structures to be longer and constructed in significantly deeper water. Increased construction costs, structures in exposed locations, and health and safety concerns are just some of the aspects that a coastal engineer must consider when designing and building new maritime structures.
This fully revised and updated edition provides full descriptions of the process covering:
guidance on hydraulic design, including design wave conditions, prediction of scour and vessel mooring loads
new methods (developed from extensive laboratory testing) for the prediction of wave loading, including forces on the underside of jetty decks
new equations, graphs and coefficients for wave loadings
updated coefficients for impulsive loads
revised discussion on effects of trapped air
expanded discussion on scaling loads from hydraulic models.
With a vastly experienced team with associations to HR Wallingford, Piers, Jetties and Related Structures Exposed to Waves is the essential reading for maritime designers and consultants tasked with analysing, designing and constructing piers and jetties.
Giovanni Cuomo is Executive Director SPERI S.p.A, Italy. Andrea Polidoro is General Manager Middle East at HR Wallingford, Dubai William Allsop is Director at William Allsop Consulting Ltd, UK.
Foreword
Preface
Acknowledgments
About the Authors
Notations
Chapter 1. Introduction
Chapter 2. Definitions of exposed jetties, typical locations and exposures
Chapter 3. Aspects of design
Chapter 4. Wave forces on vertical elements
Chapter 5. Wave forces on horizontal elements
Chapter 6. Scour
Chapter 7. Other design and construction issues
Chapter 8. References
Erscheinungsdatum | 02.08.2024 |
---|---|
Verlagsort | Bingley |
Sprache | englisch |
Maße | 171 x 248 mm |
Gewicht | 252 g |
Themenwelt | Technik ► Bauwesen |
ISBN-10 | 1-83549-717-9 / 1835497179 |
ISBN-13 | 978-1-83549-717-3 / 9781835497173 |
Zustand | Neuware |
Haben Sie eine Frage zum Produkt? |
Mehr entdecken
aus dem Bereich
aus dem Bereich
Grundlagen und Vorgehensweisen
Buch | Softcover (2021)
Springer Fachmedien Wiesbaden GmbH (Verlag)
37,99 €
Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen
Buch | Hardcover (2024)
Springer Vieweg (Verlag)
59,99 €
Kommentar zu VOB/C ATV DIN 18340, ATV DIN 18299
Buch | Softcover (2024)
DIN Media (Verlag)
69,00 €