Characterisation of the Mechanical Properties of Heat-Induced Protein Deposits in Immersed Cleaning Systems - Jintian Liu

Characterisation of the Mechanical Properties of Heat-Induced Protein Deposits in Immersed Cleaning Systems

(Autor)

Buch | Hardcover
XX, 88 Seiten
2023 | 1st ed. 2023
Springer International Publishing (Verlag)
978-3-031-21848-4 (ISBN)
149,79 inkl. MwSt

During heat treatment in dairy production, the rapid formation of heat-induced fouling deposits on the plant surface leads to reduced efficiency of heat transfer. Therefore, a regular cleaning process is required to soften the heat-induced protein deposits and then remove them from the plant surface. The mechanical property of the deposits is one of the key issues of the cleaning mechanisms since the non-fractured behaviour dominates the deformation of the fouling layer and the failure behaviour has a great impact on the cohesive removal of fouling deposits. Considering the complicated geometry of fouling deposits and their irregular distribution, indentation experiments were carried out on various kinds of protein deposits. The experimental results reveal the significant influence of the thickness of fouling deposits on their mechanical behaviour and the time-dependent nonlinear behaviour of the deposits.

Furthermore, heat-induced whey protein gel was used as the modelmaterial for fouling deposits and the non-fractured and fracture behaviour was characterized using compression and wire cutting experiments, respectively. The material parameters identified using the inverse finite element method allow the prediction of fracture behaviour under localized external loads and provide a deeper insight into cohesive removal. To investigate the softening effect during caustic washing, tensile experiments were conducted on chemically treated and untreated whey protein gels. Adequate chemical degradation leads to a softer mechanical response and increased stress relaxation, making whey protein gels more flowable and more resistant to tensile deformation. The experimental results provide useful data on the failure behaviour of chemically treated whey protein gels.

lt;p>Jintian Liu is a scientific assistant at the Institute of Machanics and Adaptronics (IMA, TU Braunschweig).


Before finishing the dissertation in January 2022, Mr Liu was responsible for the research project "Cleaning mechanisms of immerged systems", which is supported by the Deutsche Forschungsgemeinschaft (DFG) and conducted in cooperation with the Institute for Chemical and Thermal Process Engineering (TU Braunschweig). He used the whey protein gel as a representative material model to study the mechanical properties which are relevant to the cleaning process. In addition, his work involves experimental and numerical characterization of the mechanical behaviour of milk fouling deposits. His research results were presented at the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2019 in Vienna.


Besides the main research, Mr Liu has modelled the material behaviour of Elymus for the assessment of ecosystem services and experimentally characterized the mechanical strength of polymerized ionic liquids used for drug delivery systems.


Prior to his work at IMA, Mr Liu has finished the Dual Master's Degree Program supported by the German Academic Exchange Service (DAAD) under the cooperation between TU Braunschweig and Tongji University in Shanghai, China.

1. Introduction.- 1.1. Motivation.- 1.2. Aim of the present work.- 1.3. Outline.- 2. Background of cleaning in place.- 2.1. Heat treatment in the dairy production.- 2.2. Fouling and cleaning in the dairy production.- 2.2.1. Heat-induced formation of fouling deposits.- 2.2.2. The use of whey protein for experimental studies.- 2.2.3. Cleaning process for the fouled heating surface.- 2.3. The influence factors of cleaning in place.- 2.4. Cleaning mechanisms on the mechanical properties of protein deposits.- 3. Mechanical behaviour of heat-induced deposits.- 3.1. Mechanical behaviour of fouling deposits.- 3.1.1. Fouling experiments with raw milk and whey protein solution.- 3.1.2. Realisation of quasi-static and dynamic indentation experiments.- 3.1.3. Comparison of mechanical responses between milk and whey protein deposits.- 3.1.4. Influences of heat treatment on the mechanical behaviour of fouling deposits.- 3.2. Mechanical behaviour of whey protein gel.- 3.2.1. Gelation of whey protein solution with different heating conditions.- 3.2.2. Characterisation of fracture behaviour of WPG.- 3.2.3. Degradation of the WPG samples with NaOH solution.- 3.2.4. Characterisation of failure behaviour of WPG.- 4. Constitutive modelling and numerical simulation 69.- 4.1. Kinematics and balance equations.- 4.1.1. Kinematics of deformation.- 4.1.2. Stress tensors.- 4.1.3. Balance equation.- 4.2 Constitutive equations for protein deposits.- 4.2.1. One-dimensional generalised Maxwell model.- 4.2.2. Three-dimensional visco-hyperelastic model.- 4.2.3. Parameter identification through inverse finite element method.- 4.2.4. Application of modelling approaches.- 5. Conclusion and Outlook. 


          

Erscheinungsdatum
Reihe/Serie Mechanics and Adaptronics
Zusatzinfo XX, 88 p. 30 illus., 16 illus. in color.
Verlagsort Cham
Sprache englisch
Maße 155 x 235 mm
Gewicht 290 g
Themenwelt Technik Maschinenbau
Schlagworte Indentation Test • inverse FEM • Milk Fouling Deposits • Whey Protein Gel • Wire Cutting Test
ISBN-10 3-031-21848-5 / 3031218485
ISBN-13 978-3-031-21848-4 / 9783031218484
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
Normung, Berechnung, Gestaltung

von Christian Spura; Herbert Wittel; Dieter Jannasch

Buch | Softcover (2023)
Springer Vieweg (Verlag)
39,99