Future Fire Forms (eBook)

Heat, Work and Thermodynamics

(Autor)

eBook Download: PDF
2022 | 1. Auflage
IX, 288 Seiten
Springer-Verlag
978-3-031-12081-7 (ISBN)

Lese- und Medienproben

Future Fire Forms -  Cornel Stan
Systemvoraussetzungen
106,99 inkl. MwSt
  • Download sofort lieferbar
  • Zahlungsarten anzeigen

Keep on running by clever burning! This book reports how humans created materials, machines and power plants with the help of fire and which fuels, with their advantages and disadvantages, they have used so far. 'Climate rescuers' of all stripes, whether qualified for such challenge or not, want to eliminate the fire completely and replace it with electricity from photovoltaics and wind power.

The book contains facts and evidence as to why solar panels and windmills cannot be sufficient to ensure all the world's energy needs. Neither combustion nor thermal engines are responsible for the environmental hazard till now, but the fuels they have received in the past. Let's feed the fire with nature-compatible fuels and let it unfold properly in very effective machines and systems! The book describes systematically and comprehensibly for everyone, thermodynamic laws and methods for the design of very efficient machines and drives, as well as regenerative, climate-neutral fuels. This lecture is highly recommended when seating in front of a fireplace or sitting beside a campfire.



Prof. Dr.-Ing. habil. Prof. E. h. Dr. h. c. mult. Cornel Stan studied aerospace engineering at the Polytechnic University of Bucharest. He received his doctorate in 1984 in the field of internal combustion engines at the Technical University of Zwickau and completed his habilitation there in 1989 in the field of automotive engineering. From 1984 he worked for the MZ-Motorradwerk Zschopau (successor to DKW) for seven years, where he was in a leading position in the development of future drives.

In 1992 Stan was appointed professor for technical thermodynamics at the University of Applied Sciences in Zwickau, later the West Saxon University of Applied Sciences in Zwickau (Westsächsische Hochschule Zwickau), where he later also became director of the Institute for Automotive Technology. His teaching and research areas include motor vehicle drive systems, direct injection processes, simulation of thermodynamic processes, combustion processes, alternative fuels and energy management in vehicles. His specialist books on thermodynamics, alternative drives for automobiles and direct injection systems for gasoline and diesel engines are included in many of the major national libraries around the world. Stan is the author or co-author of more than 30 specialist books, over 150 scientific articles and 40 international patents, in particular on unconventional injection processes in internal combustion engines.

In 1994 he became chairman of the board and scientific director of the newly founded research and transfer center e.V. at the West Saxon University of Applied Sciences in Zwickau, (FTZ Zwickau), whose activities are currently focused on automotive engineering and electronics, electromagnetic compatibility, electrical power engineering, new technologies and materials in mechanical engineering and laser technology.

From 1994 to 1996 Stan was appointed Honorary Professor (Professore a Contratto) at the Universita degli Studi di Pisa, Italy, and in 1998 and 1999 Honorary Professor at the Universita degli Studi di Perugia, Italy. In 2002, 2003, 2004 he was Honorary Professor (1st class des Professeurs) at the Université Pierre et Marie Curie, Paris, France. In 2005/2006 he was Russell Severance Springer Professor of Mechanical Engineering (Invited Professor) at the University of California, Berkeley, USA.

Between 2000 and 2010 Stan served as a Member of the Editorial Board of the Journal of Automobile Engineering, Institution of Mechanical Engineers ImechE, UK. Since 2012 he has been editor-in-chief of the magazine Ingineria Automobilului (Automotive Engineering) of the SIAR - Romanian Association of Automotive Engineers.

Stan organized and led several international congresses and conferences, among others: 'Alternative Propulsion Systems for Automobiles', Essen 2000; 'Development Trends of Motorcycles', Zwickau 2002, Munich 2003, Borgo Panigale / Ducati, 2004, 2005, 2007;'Alternative Propulsion Systems for Automobiles', Berlin 2007, Munich 2009; 'VDIK-Future Propulsion of Automobiles', AMI Leipzig, 2009, 2010, 2012, 2014, 2016.[16]

Stan is also the author of well-known novels published in German, English and Romanian. Among his novels are the 'Automacher' and 'Dracfried'.

Stan´s languages for publications, courses and conferences are German, English, French, Italian and Romanian.

Awards and distinctions:

Fellow of the Society of Automotive Engineers SAE International, 2008

Honorary Professor at Transilvania University of Brasov, Romania, 2004

Doctor Honoris Causa at Transilvania University of Brasov, Romania, 2005

Doctor Honoris Causa at Ovidius University of Constanta, Romania, 2018


Erscheint lt. Verlag 11.8.2022
Zusatzinfo IX, 288 p. 1 illus.
Sprache englisch
Themenwelt Technik
Schlagworte Combustion forms • Fuels without climate impact • Future automobiles • Processes in advanced thermal machines • Thermodynamics applied for heat and work • Thermodynamics of heat and work
ISBN-10 3-031-12081-7 / 3031120817
ISBN-13 978-3-031-12081-7 / 9783031120817
Haben Sie eine Frage zum Produkt?
PDFPDF (Wasserzeichen)
Größe: 13,2 MB

DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasser­zeichen und ist damit für Sie persona­lisiert. Bei einer missbräuch­lichen Weiter­gabe des eBooks an Dritte ist eine Rück­ver­folgung an die Quelle möglich.

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seiten­layout eignet sich die PDF besonders für Fach­bücher mit Spalten, Tabellen und Abbild­ungen. Eine PDF kann auf fast allen Geräten ange­zeigt werden, ist aber für kleine Displays (Smart­phone, eReader) nur einge­schränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Mehr entdecken
aus dem Bereich
DIN-Normen und Technische Regeln für die Elektroinstallation

von DIN Media GmbH

eBook Download (2023)
DIN Media GmbH (Verlag)
86,00