THERMEC 2021

Preface
Plenary
Recent Developments in the Processing of Advanced Materials Using Severe Plastic Deformation
Keynotes
Achieving Superplasticity in Fine-Grained Al-Mg-Sc Alloys
Improvement in Mechanical Performance of Biomaterial Ti Alloy by Controlling Volume Fraction of Martensite Phase
Additive Manufacturing of Ti6Al4V with Wire Laser Metal Deposition Process
Model Description of the Unusual Temperature Dependence of the Viscosity of Metallic Glass-Forming Liquids
Mechanical Stress Issues of La0.6Sr0.4Co0.2Fe0.8O3-δ
Effects of Al, Si and N Content on the Formation of M-A Constituent and HAZ Toughness of Ti-Containing Low-Carbon Steel
Grain Orientation Spread in Dynamically Recrystallized Austenitic Steel
Effect of the Morphology, Size, Distribution and Homogeneity of Carbides and Matrix on Wear Resistance in High Cr-Alloys White Cast Iron
Friction Stir Welded AISI 304 Metal Sheets for Application in Food Implants
The Use of Transient Liquid Phases in Powder Metallurgy
Austenitic Grain Size Effect on the Phase Transformation of a 7.0% Cr Steel for Forging
Evolution of Carbides during Prestrain and Tempering
Detonation Spraying of Metal Carbides Composites
How to Master Interfaces in MMCs with Reactive Constituents
Synchrotron 3D μ-Tomography of Porosity during Hot Isostatic Pressing of a Single-Crystal Nickel-Base Superalloy
Evaluation of Cu-Ni-Based Alloys for Thermoelectric Energy Conversion
Mechanical and Thermal Properties of Harmonic Structured Composites by MM/SPS Process
Time-, Temperature- and Frequency-Dependent Viscoelastic Properties of a Curing Epoxy Adhesive
Fatigue Behavior of Age-Hardening Cu-6Ni-1.5Si Alloys with Different Grain Sizes
Processing Strategies for Hot-Rolled Medium-Mn Steels
Development and Characterization of New Ti-25Ta-Zr Alloys for Biomedical Applications
Effect of Microshot Peening on Fatigue Strength of Austenite Stainless Steel
Mechanical Properties of Interface Layers in SiC/TiAl Composite
Inferences of Baking Time on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based Electroplating
Influence of Substitution of Fe by Mo on Heat Treatment Behavior in Ti-Mo-Fe Alloys
Layer-Thickness Dependence of Hardness and Local Bucking Behavior in Electrodeposited Ni-Co-Cu/Cu Multilayered Films
Hardness Development of Mechanically-Bonded Hybrid Nanostructured Alloys through High-Pressure Torsion
Energy Absorption of Additively Manufactured Porous Metals with Disordered Cells
Experimental Characterization and Modelling of the PLC Effect in an AlMg-Alloy
Influence of Strain-Hardening and Dynamic Recovery on DDRX Steady State
Ultrasonic Processing of Magnesium Alloy for Property Enhancement
Computer Prediction of Phase Fraction in Multipass Weld of Duplex Stainless Steel - Proposal of Microstructural Improvement Welding Process -
Effect of Particle Morphology on Thermal Properties of TiB2 Particle Dispersed Pure Aluminum Composites
Development of New Particle Method Based on MPS and its Applicability for Friction Stir Welding of Dissimilar Joint
Contributions
Corrosion Resistance of Additive Manufactured Titanium Alloy Parts: The Effect of Recycled Powders
PL Properties of (Ba, Ca)2( Si, P)O4: Eu Synthesized by Various Annealing and Cooling Process
Microstructural Prediction of Heat Treated Steel Forgings for Severe Applications
Influence of Elastic Modulus of Matrix on Conductivity of VGCF Dispersed in Plastic Matrix
Study of the Impact of the Synergic Line and the Strategy of Conception on Ti-6Al-4V Wire Arc Additive Manufacturing Process (WAAM-CMT)
Thermomechanical Processing without Accelerated Cooling to Achieve an As-Rolled Yield Strength of 400MPa in C-Mn Steel Plate
15/15 Ti Stainless Steel Welding Process Optimization for GEN IV Nuclear Application in the GEMMA Project Frame
High Cycle Fatigue Behaviour of Cu/Sn Intermetallic Compounds Prepared by Transient Liquid Phase Bonding Process
Thermal and Magnetic Properties of Ternary Fe-B-C and Quaternary Fe-B-C-Si Alloys with High Glass-Forming Ability and High Magnetization
Adaption of 3D Printing for Rapid Tooling
High Purity Magnetite Microparticles Directly Derived from Mill Scale via Hydrogen-Reduction Method
Fracture Behavior of an AlMgMnSc Alloy at Different Temperatures
Multi-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser Cladding
Design Solutions from Material Selection for Rib Fixators
Effect of Distance along the Built Axis on Mechanical Properties and Microstructure in Al10SiMg SLM Alloy
Martensitic Transformation and Damping Behavior of Fe-Mn-Nb Damping Alloys
Hot and Cold Deformation Behaviors and Microstructure Evolutions of Mn18Cr18N Austenitic Stainless Steel with High-Nitrogen
Microstructure Evolution in an Advanced High Strength Steel under Continuous Cooling
Thermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure Torsion
Study on the Effect of V Microalloying on Earthquake Resisting High-Strength Reinforcing Bar Steels
Change of Microstructure and Analysis of Fracture of the Ti-50.8 at.% Ni Alloy in the Ultrafine-Grained State after Multiple Martensitic Transformations with a Large Number of Cycles
Effect of Different Production Processes on Metallic Composite Phase Change Materials for Thermal Energy Storage
Extended Model for Prediction of Transition from Internal to External Oxidation in Steels: Comparison between Analytical/Semi-Analytical and Numerical Approaches
Challenges in Printing Certified Additive Manufactured Material: Ensuring Process Stability and Material Quality
Influence of Mn and Ni on Austenite Stabilization during a High Temperature Q&P Treatment
Changes in Mechanical and Microstructural Properties of Magnesium Alloys Resulting from Superimposed High Current Density Pulses
Revisiting the Ostwald Ripening: A Discrete Model Based on Multiple Pairwise Interactions
Mechanical Properties of Selective Laser-Melted Components of Alsi10mg for Prototype Vehicles
The Isothermal Oxidation of MCrAlY Protective Coatings
Delamination of Pearlitic Steel Wires: Role of Strain Partition on Mechanical Properties of Pearlitic Wires
Evolution of the Microstructure and Mechanical Properties of the Ultrafine-Grained VT8M-1 during Isothermal Die Forging and Thermal Treatment
Statistical Errors in X-Ray Triaxial Stress Analysis by Cos α Method
Thermal Stability of Retained Austenite in Advanced TRIP Steel with Bainitic Ferrite Matrix for Automotive Industries
3d Printer Heads for Extrusion of Biologicals Gels
Influence of Surface Roughness on the Corrosion Behaviors of DP590 Steel
Hot Stamped Aluminium for Crash-Resistant Automobile Safety Cage Applications
Performance of Vibration Power Generators Using Single Crystal and Polycrystal Magnetic Cores of Fe–Ga Alloys
Biocompatibility of Anodized Low-Cost Ti-4.7Mo-4.5Fe Alloy
Effect of Thermomechanical Treatments on the Mechanical Properties of New Low-Cost Ti-Fe-Nb-Zr Alloys
Tailored Liquid Phases for Enhanced Sintering of Advanced PM - Steels
Aging Response in Selective Laser Melted AlSi10Mg Alloy as Function of Distance from the Substrate Plate
Fracture Toughness and Fatigue Crack Growth Characteristics of UFG Microalloyed and IF Steels Processed by Critical Phase Control Multiaxial Forging
Thermal Barrier Coatings for Molybdenum Produced Using Nanopowders
Increasing Hardenability and Hardness of Quenching and Tempering Alloys by Substituting Chromium with Manganese
Multi-Class Grain Size Model for Forged Alloy 718 Aircraft Parts
Non-Vacuum Fabrication of Bandgap-Controlled CZTGS Alloy Films Using CZTS+CZGS Mixed Nanoparticle Inks
Tensile Deformation Behavior of Magnesium Single Crystals with Different Yttrium Concentrations
Brazing of Stainless Steel Using Electrolytic Ni-P Plating Film and Investigation of Corrosion Behavior
Shear Banding in Rotated Goss Grains and its Effect on the Formation of Cube Texture in Non-Oriented Electrical Steel
Micromechanical Simulation Approach of Dual Phase Steel Artificial Microstructure Using Random Field Model
Orthotropic Behaviour of Magnesium AZ31 Sheet during Strain Localization
Microstructure and Tensile Properties of Sn-Ag-Cu-In-Sb Solder
Iron Carbon Masteralloy as Sintering Activator for Low Alloy Powder Metallurgy Steels
Quantitative Detection of Hydrogen Gas Release during Slow Strain Rate Testing in Aluminum Alloys
Effect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation Processing
Grain Refinement of Fe-X Alloys Fabricated by Laser Powder Bed Fusion
The Influence of Introduced Strains on the Exfoliation Corrosion Behavior of Mg-14mass%Li-1mass%Al Alloy
Corrosion Resistance of Mg Alloy with High Zn Concentration Including Impurity Cu
Optimization of Slab Edge in Roughing of Stainless Steel
Orientation Analysis
Parametric Study of Pulse Arc Welding (PAW) and Laser Beam Welding (LBW) Techniques for Electrical Vehicle Battery Cells
Post-Fire Performance of Square Concrete-Filled Steel Tube Columns under Uni-Axial Load
Promising Bendability of a New As-Rolled Medium-Carbon, Low-Alloy Steel with Isothermal Upper and Lower Bainitic Microstructure
Study on Forging Permeability of 06Cr19Ni9NbN Steel during Hot Deformation
Influence of Chromium and Niobium on the Press-Hardening Process of Multiphase Low-Alloy TRIP Steels
Optimising Computational Fluid Dynamic Conditions for Simulating Copper Vertical Casting
Improvement on Impact Toughness of Cold Formed S420 Steel by Direct Quenching
Effect of Cooling Rate below Ms Temperature on Hydrogen Embrittlement of TRIP-Aided Martensitic Steels
Investigation of Temperature Evolution and Flash Formation at AA5083 Studs during Friction Surfacing
Microstructure and Precipitation Studies of Gas Tungsten Arc Welded Haynes 282 Superalloy
Carrier Concentration of CeFe2Al10 as a Candidate of Thermoelectric Material
Effect of Alloying Element on Mechanical Properties of High Strength Austenitic Steel
Magnetic and Mechanical Properties of Fe-Cr-Si-Mo Alloys by MIM Process
Structural Changes in Multi Principal Element Alloys in Dependence on the Aluminium Content
Shape Memory Properties of Ti-Ni Shape Memory Alloy / Shape Memory Polymer Composites Using Additive Manufacturing
Temperature Increase during Isothermal Forging of Ti-5Al-2Sn-2Zr-4Cr-4Mo Alloy Using a 1500-Ton Forging Press
Synthesis PbFCl-Type Mixed Anion APX(A=Hf, X=S, Se) Superconductors Related with Topological Materials by High-Pressure Technique
Analysis of the Strain Distribution and Texture Measurements in Asymmetric Rolling (AR) and Asymmetric Accumulative Roll Bonding (AARB)
Effect of Heat Treatment on Structure and Properties of Martensite Stainless Steel for Ice-Class Ships Obtained by Direct Laser Deposition Method
Microstructure and Tensile Properties of TRIP-Aided Steel Sheet Subjected to Hot-Rolling and Austempering
Fabrication of Three-Dimensional Microstructure Film by Ni-Cu Alloy Electrodeposition for Joining Dissimilar Materials
Reaction Sintering of Tial Intermetallic Compound
Comprehensive Phase Field Study on Directionally-Solidified MoSi2/Mo5Si3 Eutectic Alloy
Electron Beam Melting: From Shape Freedom to Material Properties Control at Macro- and Microscale
Temperature-Dependent Mechanical Stability of Retained Austenite in Thermomechanically Processed 3Mn Steel
Microstructure and Mechanical Properties of the UFG Magnesium Alloy Mg-1%Ca
Effect of Microstructure on Joint Strength of Fe/Al Resistance Spot Welding for Multi-Material Components
Severe Plastic Deformation of Copper, Binary Cu-Zn Solid-Solution Alloys, and High-Strength Brass by High-Pressure Torsion
Structural Characterization of a Biogenic Secretion Extracted from the Tendon or Ligament in Rabbits for Artificial Ligament Formation
Enhancing High-Temperature Creep Resistance of In Situ TiAl-Based Matrix Composite by Low Volume Fraction of Ti2AlC Particles
Impact of Microstructural Anisotropy of As-Cold-Sprayed Cu Deposits on its Annealing Effect
Performance of 14Cr ODS-FeCrAl Cladding Tube for Accident Tolerant Fuel
Analysis of the Applicability of Effective Thermophysical Properties to Composite Phase Change Materials
Long Term Stability Evaluation of Stress Improvement Effect on Ni-Based Alloy Welds by Various Residual Stress Improvement Methods
Inhomogeneous Microstructure and its Thermal Stability of AlSi10Mg Lattice Structure Manufactured via Laser Powder Bed Fusion
Study of Nb Solubility in Hot Charging Process
Cold Spraying of IN 718-Ni Composite Coatings: Microstructure Characterization and Tribological Performance
Defect Reduction and Quality Optimization through the Modelling of Plastic Deformation and Metallurgical Evolution
Grain Boundary Engineering of Strain-Annealed Hastelloy-X
Modelling of Cyclic Delamination Behavior of Thin Multilayered Structures Using Gradient Elasticity and Damage Accumulation
Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)
Dynamic Recrystallization Mechanisms of Nickel Niobium Alloys during Hot Working
Effect of Stress Gradient on Heat Cycle Fatigue Life Prediction of Solder Joints by Repetitive Bending Test
Effect of Strain Rate on the Microstructure and β-Texture Evolutions in β-Processed Forging of a Near-β Titanium Alloy
Additive Manufacturing of Multi Layered Bioactive Materials with Improved Mechanical Properties: Modelling Aspects
Nickel Supported Modified Zirconia Catalysts for CO2 Methanation in DBD Plasma Catalytic Hybrid Process
Physical Modelling of Strain Induced Roughness of Copper Wire during Dieless Drawing Process
Effect of Hot Processing on Mircrostructure and Properties of Flat Billets of TA15 Titanium Alloy

In Situ Observation during Copper Alloy Brazing Using an X-Ray System
Activities of Non-Basal Slips in Rolled Mg-Li and Mg-Ce Alloys Sheets
Creep Resistance of Ultrafine-Grained VT8M-1 Alloy
The Domain of Portevin-Le Chatelier Effect in Al-3Mg Alloy
The Effect of Hydrofluoric Acid Concentration in Sulfuric Acid-Based Desmutting Solution for Aluminium Alloys
Influence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al0.5NbTa0.8Ti1.5V0.2Zr Refractory High-Entropy Alloy
Strain Rate Dependent Mechanical Stability of Retained Austenite in Hot-Rolled Medium-Mn Sheet Steels
Extra-Hardening of SPD-Processed Al-Mg Alloy with Minimum Grain Sizes
Improving Mechanical Properties of Twin-Roll Cast AZ31 by Wire Rolling
Mechanical Behaviour of Beta Titanium Alloys
Preliminary Development of Cold Spray Procedures for Nickel Aluminum Bronze Casting Repair
High-Temperature Tribological Properties of ReB2-Based Ceramic/Si3N4 Sliding Pairs
Effects of Retained Austenite Conditions on the Ductility of the Advanced High Strength Steels
Solid State Amorphization and Alloy Parameters for High Entropy Alloys
Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution
Stress Ratio Effect on Fatigue Crack Initiation Mechanism of Magnesium Alloy AZ31
Applications of Smart Material of Li2O-(Nb/Ta)2O5-TiO2 Solid Solution Having a Unique Periodical Structure
Crystal Orientation Relationships among Acicular Ferrite, Oxide and the Austenite Matrix in a Steel Weld Metal
FTMP-Based Kink Deformation and Strengthening Mechanisms for Mille-Feuille Structures
Influence of Radial Shear Rolling Regimes on the Homogeneity of Structural-Phase State, Mechanical Properties and Fatigue of near β Titanium Alloy
Progress towards a Complete Model of Metal Additive Manufacturing
Investigation of Three-Dimensional Geometry of Butterfly Martensite and Analysis of Relationship between Hardness of Lath/Butterfly Two-Phase Martensite and its Grain Thickness in Medium-Carbon Steel
Effect of Cold Reduction Rate on Ferrite Recrystallization Behavior during Annealing in Low-Carbon Steel with Different Initial Microstructures
Steel Production Technology Development for the Manufacture of Pipes Used in the Extraction and Transportation of Petroleum Products
Mechanical Joining Utilizing Friction Stir Forming
Threshold Voltage Control for MONOS Nonvolatile Memory with High-k HfN/HfO2 Stacked Layers for Analog Memory Application
Effect of Aging Heat Treatment at 400-600°C on the Microstructure and Tensile Properties of 15Cr-15Ni Ti-Stabilized Steel Cladding

In Situ Neutron Diffraction Measurement during Bainite Transformation and Accompanying Carbon Enrichment in Austenite at iMATERIA, J-PARC MLF
Metallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling Mills
Anisotropy of Plastic Deformation in Hexagonal Metals
The Multiphase Micro- and Nanostructures of 0.2 and 0.4 C Direct-Quenched and Partitioned Steels
When 3D Printing Meets Tribological Demands - Surface Functionalization Technologies as Added Value of Existing and New Emerging Products
A Novel Method for Evaluation of Chromium Evaporation from Solid Oxide Fuel Cells Interconnects: A Feasibility Study
Microstructure Development in the Bonding Zone of Explosively Welded Ti and Cu Sheets
Effect of Nano Sodium Titanate Whisker and Aramid Pulp on the Friction and Wear Behavior of Resin-Based Brake Material
Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars
The Influence of the Sintering Temperature on the Properties of the 0.98Pb(Zr1-xTix)O3 - 0.02La(Fe3+0.5, Nb5+0.5)O3 Ceramic Systems
The Occurrence of a Peripheral Coarse Grain Zone (PCGZ) in Extruded Bars of AA 7108
Microstructure after Solution Annealing of the Nuclear Grade Austenitic Stainless Steel DIN 1.4970
Application of Image Analysis Method Combined with Microhardness Measurement to Determine Phase Fractions
Stability of Ordered B2-βO and Disordered BCC-β Phases in Tial - A First Principles Study
The Influence of Process Parameters on Structure of YSZ Coating Deposited by Plasma Spraying on AISI 316L Stainless Steel Surface by APS Method and on Ti6Al4V Titanium Alloy Surface by PS-PVD Method
Microstructure of Al-2.5Fe Binary Alloy Fabricated by Laser Powder Bed Fusion
Effect of Extrusion Temperature and Thermal Treatment on Microstructure and Mechanical Properties of Ti-1300 Alloy Tube
Microstructure and Mechanical Properties of a Lamellar-Structured Low-Alloy TRIP Steel
Near-Threshold Fatigue Crack Growth Behavior of ECAPed Ultrafine-Grained Copper
Microstructure Evolution during Strain-Induced Transformation of Austenite in an Austempered Ductile Iron (ADI)
Influence of Heat and Surface Treatments on the Fatigue Response of DMLS Manufactured AlSi10mg
Microstructure Evolution during Multiaxial Processing of TA6V
Mechanism of Void Formation during Brazing of Ni Paste Brazing Filler Metal
Internal Dislocation Density in Deformed GlidCop from X-Ray Line Profile Analysis
Effect of Stacking Fault Energy and Solute Atoms on Microstructural Evolutions of FCC Metals Processed by Severe Plastic Deformation
Friction and Wear Response of a Hard-Anodized AA6082
Standardization of Cosα Method for X-Ray Stress Measurement
Effects of Alloying Elements on the Stability of ω-Fe Phase in Steel: A Density Functional Theory Study
Effects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni Alloy
Non-Parametric Comparison of Crystallographic Orientation Distributions
Metal-Free and Carbon-Free Flexible Self-Supporting Thin Film Electrodes
Fabrication of Silver-Nanowire/PVDF Self-Supporting Thin Flexible Electrode Membranes
Miniaturized Blood Sampling System with Integrated Sample Preparation
From Biomaterial to Organoid - Bioprinting for Practice
Residual Stress in Automotive Powertrains: Methods and Analyses
Magnetization and XRD Studies of Laser Heat Treated SmCo5 Powders
High Energy Surface Implantation by Ion Nitrogen of Ultra- Fine Grained Ti-6Al-4V Alloy for Engineering Application
Industrial Fe-Simulation of Roughing Using an Automatic Solver Shifting Technique
Spinning Formability of Al-Mg-Si Alloy
Deformation Behavior of Single Particle Cold Spray Ti-6Al-4V Splats
Effects of Microstructure on the Hydrogen Embrittlement Resistance of Ultra High Strength Martensitic Steel Sheets
Optimization of Preform for Stub Axle Forging Using Simulation Software
Hydrogen Embrittlement and Hydrogen Trapping Behaviour in Advanced High Strength Steels
Properties of Alumina Coatings Deposited by Detonation Spraying
Experimental Study and Modelling of the Ferritic Steel Anisotropic Behavior under Associated and Non-Associated Flow Rule
Effect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning Treatment
Microstructure and Shape Memory Behavior of Ti-18Nb-6Zr (at.%) Alloy
Titanium Alloy Milling Using Abrasive Water Jet for Repair Application: Modifications in Surface Quality and Material Integrity Following Plain Water Jet Cleaning
High-Temperature Oxidation of AISI441 Ferritic Stainless Steel for Solid Oxide Fuel Cells
Effect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy Alloys
Microstructure Refinement Effect on EUROFER 97 Steel for Nuclear Fusion Application
The Effect of Long-Term Heating on Thermal Stability of Ultra-Fine Grained Titanium Alloy VT8M-1 Processed by Rotary Swaging
Structure and Microstructure of Advanced Materials Characterized by Neutron Diffraction
Evaluation of Interfacial Thermal Resistance of Al-AlN Composites by Using Image-Based Calculation
The Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO2
Performance of a Matrix Type High Speed Steel after Deep Cryogenic and Low Tempering Temperature
Development of High-Accuracy Simulation Test Technology for Hot Stamping
Effect of Temperature and Humidity on Degradation Behavior of Cu/Epoxy Interface under High Temperature and High Humidity Aging
Tensile Deformation of Si Single Crystals at High Temperatures

In Situ Evaluation of the Joining Defects in a Pb-Free Soldered Joint
Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels
Microstructure Modification of 3D Printed Aluminium Alloys by Friction Stir Processing
Investigation of Bonding Strength of Al Solid Phase Diffusion Bonded Joint with Surface Treatment Using Electrolyzed Water
Powders for Additive Manufacturing: From Design to Certification
Mechanical Property and Heat Treatment Behaviour of Ti-Zr-Fe Alloys
Study of High Temperature Properties of AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion
Optimization of Molecular Characteristics via Machine Learning Based on Continuous Representation of Molecules
Utilisation of Titanium and Titanium Dioxide as Scaffolds for Proliferating Coral Reef
Improvement of Strength and Ductility by Combining Static Recrystallization and Unique Heat Treatment in Co-20Cr-15W-10Ni Alloy for Stent Application
Effects of Carbon Content Change on Growth of Compound Layer in Surface of Nitrided Steel
Bending and Welding of New High Oxidation Material - Thor™ 115
Surface Morphology of Refractory Metals Submitted to a Single Laser Pulse
Integral Computer Model for Simulating Microstructure Evolution during Thermomechanical Processing and Heat Treatment of Steels and Predicting their Final Mechanical Properties
Studies on Thermomechanical Cycling Characteristics of an Ni-Ti-Cu Shape Memory Alloy
Finite Element Analysis of Surface Modification of Titanium Alloy Used for Hip Implant
Forming an Optically Transparent Graphene Film via the Transformation of C60 Molecules
Effect of the Pre-Strain on the Elastic Behavior of a Dual-Phase Steel with Different Martensite Contents
Adhesion Properties of Thin Film Multilayers: Comparison of Nanoindentation and Four-Point-Bending Techniques
Effect of Strain Rate on Compressive Behavior of a ZrCuNiAl Bulk Metallic Glass at Room Temperature
Effect of Cellular Dislocation Structure on the Strength of Additively Manufactured 316L Stainless Steel
Syngas Production by Dry Methane Reforming over Mg Doped NiO-ZrO2 Catalysts
Deformation Property of Dense Oxide Coated Magnesium Alloy Surface
Remelting of Thermal Spraying Coatings - Technologies, Properties and Applications
Processing of Nanostructured Bulk Fe-Cr Alloys by Severe Plastic Deformation
Study of the Microstructure and Mechanical Properties Obtained by Laser Boost in SLM Process for the Ti-64 Alloy
The Influence of HPT on Microstructure and Wear Resistance of Al-7wt%Si-2wt%Fe Alloy
Mechanical Behaviour of Rubber Material with Consideration to Mullins Effect
Investigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale Model
Static Recrystallization in Aluminum/Graphene Composites
Correlation of Segregation Energies of Ni and Fe with Mendeleev Number
Operando Monitoring of Charging Processes in Battery Cathodes by Magnetometry and Positron Annihilation
Goss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-Casting
Investigation of the Role of Intermetallic Phases in Microstructure of UFG Titanium VT8M-1 Alloy
The Effect of Aging Conditions on the Stress Relaxation Behavior of 17-7PH Stainless Steel
First-Principles Study of Epoxy Resin Adhesion to Tin Oxide Surface
Formation of Cemented Tungsten Carbide Layer with Compositional Gradient Processed by Directed Energy Deposition
The Impact of Interface Characteristics on Mechanical Performance of a Hot-Forged Cu/Ti-Coated-Diamond Composite
Effect of Chemical Composition on Grain Refinement of AlxCoCrFeNi High Entropy Alloys with NiAl Grain Boundary Precipitates
Improvement of Mechanical Properties of Laminated Composites by Using Cryogenic Roll Bonding
Development of Cu Coating on Ceramic Substrates by Low Pressure Cold Spray and its Deposition Mechanism Analysis
Thermal Degradation Behavior of Hydrogen Permeability of Pd-Coated V-Alloy Membrane for Hydrogen Separation and Purification
Analysis of Different Thermal Conductivity Measurements for Al-Si Casting Alloys
Dislocations of Ti-600 Alloy Crept at 600°C with Two Stresses
Microstructure and Mechanical Properties of Cu-Fe Alloys via Powder Metallurgy
Numerical Simulation of Microstructure Evolution during Continuous Hot Rolling Process of GCr15 Steel Rod
Effect of Tempering Time on Microstructure and Mechanical Properties of SA738 Gr.B Steel
The Microstructure and Properties of Low Carbon PM 625 Alloy for Marine-Based Application
Efficiency of Microstructure Refinement in Ti-Based Alloys
Metallic Composites, Prepared by Deformation Processing
The Effect of Deformation Strain on Texture Uniformity in Tantalum Sheet during Asymmetric Cross Rolling
Effects of Powder Microscopic Defects on Densification and Mechanical Properties of WC via Spark Plasma Sintering
Three-Dimensional Characterization of Morphology and Crystallography of a Gold Nanoisland Film
Unmixed Joint of A1050 and C1020 by Friction Stir Butt Welding
Spark Plasma Sintering of Paper-Derived Ti3AlC2-Based Composites: Influence of Sintering Temperature
Fabrication of Be-Ta Ti Alloys without Pre-Alloyed Powders via SLM
Martensitic Transformation of High-Entropy and Medium-Entropy Shape Memory Alloys
Suppression of Intergranular Fracture in 7000 Series Aluminum Alloys
Elasto-Plastic Deformation of Heterogeneous Metallic Materials: An Experimental Approach with AlMg4Si10
Effects of Tensile Testing Temperature on Mechanical Properties and Deformation Behavior in Medium Mn Steels
Characteristics of Cube Orientation for Pure Iron Tape Fabricated by Cold Rolling and Annealing
The Application of Neutron Diffraction Techniques (NDT) in Measuring Residual Strain-Stresses of Engineering Materials
Evaluation of Color Tone and Exfoliation Resistance of Porcelain-Firing Ti with White Oxide Coating as an Opaque Layer
Effects of Nb Content and Heat Treatment on Fretting Wear Behavior of Ti-Nb Alloys
Modelling Dilatometry Data of Isothermal ω-Phase Formation in a Strongly β-Stabilised TiV-Alloy
Hardness Prediction of AA 2024-T3 FSW Weld
Density Functional Theory Study of the Adsorption of Metal Adatoms on Graphene
Investigation of CGHAZ Simulations of Low-Carbon Bainitic Steels
Grey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium Alloy
Microstructure Factor of Creep Behavior in Near-α Ti Alloy