Mechanical Engineering: Advanced Materials Processing Technology

Preface
The Effect of EDM Process on the Microstructure of CP-Titanium Grade 2 and AISI 316 L in Cardiovascular Stent Manufacturing
Corrosion Behavior of a Predeformed Fe-Ni Lateritic Steel with Bainite Structure
Carbon and Nitrogen Composition for Non-Precious Metal Catalyst to Physical Characterization and Electrochemical Properties
Analysis the Effect of Charcoal Mass Variation to Ni Content, Sinter Strength and Yield on Sintering Process of Limonitic Laterite Nickel Ore
Direct Reduction of Limonitic Laterite Nickel Ore with Variation Type of Reducing Agents to Fe, Ni Content and Recovery by Using Coal-Dolomit Bed Method
Effect of Ground Glass Particles on the Water Absorption and Tensile Properties of Epoxy
The Effect of Acidity and Rotation Speed in Titanium Dioxide Synthesize Process
Improving of Electric Voltage Response Based on Improving of Electrical Properties for Multiferroic Material of BiFeO3-BaTiO3 System
Effect of Copper Addition on Fatigue Strength Al-10Si Alloys Produced by Die Casting
Tensile, Flexural and Water Absorption Properties of Bamboo Fiber/Unsaturated Polyester Composites: Effect of Calcium Carbonate Content
Reliability Evaluation of Fatigue Crack Growth Rate of Heat-Treated TIG-Welded Al 6013-t4 by Two-Parameter Weibull
Natural Fiber Reinforced Composites as Bulletproof Panel Materials
Effects of Oil Palm Empty Fruit Bunch and Magnesium Oxide Volume Fraction on Mechanical Characteristics of Railway Brake Block Composite Material
Effect of Stirring on the Quality of ADC 12 Cast Aluminium Alloy
Application of Seeds from Psidium Guajava as Organic Inhibitor
Extraction and Characterization of Nanocrystalline Cellulose (NCC) from Ramie Fiber by Hydrochloric Acid Hydrolysis
Impact Toughness Characteristics of SM570-TMC Steel Joint Using Welding Wire Containing 0.4% Nickel at Different Level of Heat Input
Effect of Surface Treatment and Cutting Orientation to the Changes in Stents Surface Roughness
Effect of Grain Size in Silica Blasting Processes on the Surface Roughness of Medical Grade SS 316L
Analysis of Condensor Tube Thinning Distribution and their Failure Modes Based on Eddy Current Data
Numerical Convergence in Wear Volume Prediction of UHMWPE Acetabular Cup Paired with cp Ti Femoral Head Hip Implants
Fabrication Membrane of Titanium dioxide (TiO2) Blended Polyethersulfone (PES) and Polyvinilidene fluoride (PVDF): Characterization, Mechanical Properties and Water Treatment
Effects of Aluminum and Manganese Addition on the Microstructures and Mechanical Properties of Cu-29Zn Alloys
Correlation of Holding Time and Bottom Ash Particle Size to Mechanical Properties of Polypropylene Composite
Surface Roughness Characterization of Medical Implant Material SS316L Stainless Steel after Cut with Water Jet Cutting Process
Non-Monotonous Effect of Adhesive Thickness on The Dynamic Stiffness of Adhesive Butt Joint
Deformation Analysis of Internal Fixation Plate on Femur Bone Fracture: A Study Case on Local Raw
Macro-Micro Analysis on 2-Layer Semiautomatic MIG Welding of AA5052 Material Using ER5356 Electrode
Effect of Sulfuric Acid Concentration on the Corrosion Rate of ASTM A213-T12 Steel
Influence of Thermal Cycling Temperature on the Recrystallization of Cold Rolled Stainless Steel 316L
The Effect of Citric Acid Concentration on Corrosion Behavior of Austenitic Stainless Steel 316 L