Energy Technology 2020: Recycling, Carbon Dioxide Management, and Other Technologies (eBook)

eBook Download: PDF
2020 | 1st ed. 2020
XVIII, 434 Seiten
Springer International Publishing (Verlag)
978-3-030-36830-2 (ISBN)

Lese- und Medienproben

Energy Technology 2020: Recycling, Carbon Dioxide Management, and Other Technologies -
Systemvoraussetzungen
213,99 inkl. MwSt
  • Download sofort lieferbar
  • Zahlungsarten anzeigen

This collection addresses the pressing needs for sustainable technologies with reduced energy consumption and environmental pollutions and the development and application of alternative sustainable energy to maintain a green environment and efficient and long-lasting energy supply. Contributors represent both industry and academia and focus on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Authors also explore the valorization of materials and their embodied energy including byproducts or coproducts from ferrous and nonferrous industries, batteries, electronics, and other complex secondary materials. 

Preface 5
Contents 7
About the Editors 11
Part I Energy Technologies and CO? Management Symposium 19
1 The Impact of Solar Resource Characteristics on Solar Thermal Pre-heating of Manganese Ores 20
2 The Compatibility of Metallic Thermal Storage Materials and Housing Materials: A Computational Survey and Accelerated Reaction Experiments 31
3 Effect of Fly Ash from Coal-fired Boiler on Heat Transfer Efficiency 46
4 Optimization and Management of On-Site Power Plants Under Time-of-Use Power Price: A Case Study in Steel Mill 54
5 Economic Metals Rescue from Spent Zinc–Carbon Batteries for Industrial Value Additions 63
6 Characterization of the Hot-Pressed Coal Briquettes Prepared with the HyperCoal 70
7 The Co-extraction of Low-Rank Coal and Biomass by Polar Solvent at Mild Conditions 81
8 Discussion on the Application of Rooftop Photovoltaic Power Plant in the Steel Enterprise 90
9 Performance of Anodes with Proper Active Metal Elements Added to the Al–0.16wt%In in Alkaline Electrolyte for Al-Air Batteries 99
10 Theoretical and Experimental Research on the Mass Changes of Elements in Molten Steel with CO? Used as RH Lifting Gas 108
11 Hydrogen as a Fuel and Ramifications 120
12 Applying Biochar Composite Briquette for Energy Saving in Blast Furnace Ironmaking 124
13 Properties and Microstructure of Copper and/or Nickel Supported on GO, rGO, and NGO 135
14 Investigation of H? Addition Effects on CO/CO?/H?-Air Flames by a Combustion Diagnostic System Based on TDLAS 144
15 MnOx-Decorated Fe–Zr-Based Nano-Catalysts for Low-Temperature NH?-SCR: Improvement of Catalytic Activity 154
Part II Recycling of Secondary, Byproduct Materials and Energy 163
16 Toward 100% Recycling of Steelmaking Offgas Solid Wastes by Reallocating Zinc-bearing Materials 164
17 Granulation and Carbonization Process of Titanium-Bearing Blast Furnace Slag 174
18 Study on Cracking Control of Cold Bonded Pellets Containing Converter Dust Based on Nonhydraulic Hardening Principle 184
19 Experimentation, Modeling, and Optimum Conditions of Pyro-Hydrometallurgical-Precipitation Reaction Technology for Recovery of Copper as Oxide of Nanoparticles from a Copper Dust 193
20 Recovery Nickel-Ferrous Compound from Nickel-Bearing Secondary Resources 206
21 Extraction and Processing of Crystalline Metallurgical-Grade Silicon Prepared from Rice Husk Byproduct 222
22 Separation and Recovery of Copper from Copper-Bearing Pyrite Cinder via an Acid Leaching Process 233
23 A Recycling System for Sustainable Management of Waste Solar Photovoltaic Panels in Taiwan 243
24 Controllable Synthesis of Battery-Grade Iron Oxalate with Waste Ferrous Sulfate from Titanium Dioxide Production 251
25 Mechanical Beneficiation of End-of-Life Lithium-Ion Battery Components 261
26 Assessing the Techno-Economic Feasibility of Solvent-Based, Critical Material Recovery from Uncertain, End-of-Life Battery Feedstock 270
27 Thermodynamic Analysis and Reduction of Anosovite with Methane at Low Temperature 286
28 Recovering Plastics from Electronics Waste 296
29 Additive Manufacturing via the Direct Ink Writing Technique of Kaolinite-Based Clay with Electric Arc Furnace Steel Dust (EAF Dust) 307
30 Characterization of Wasted LEDs from Tubular Lamps Focused on Recycling Process by Hydrometallurgy 316
31 Comprehensive Utilization of Vanadium Extraction Tailings: A Brief Review 325
32 Crystallization and Carbonization of TiO?–CaO–SiO? Ternary Slag 333
33 Gravity Separation of Zinc Mine Tailing Using Wilfley Shaking Table to Concentrate Hematite 344
34 Minimization of Copper Contamination in Steel Scrap 353
35 Recycling of Blast Furnace Flue Dust with In-flight Reduction Technology: Reduction Behavior and Kinetic Analysis 361
36 Recycling Technologies of Zn–C Batteries: Review and Challenges for a Circular Economy in Colombia 373
37 Selective Recovery of Lithium from Ternary Spent Lithium-Ion Batteries Using Sulfate Roasting-Water Leaching Process 383
38 Separation and Recovery of Zinc and Cobalt from Zinc Plant Residue by Alkali Leaching 392
39 Study on Mineral Phase Composition and Viscosity of Hot Metal Pretreatment Desulfurization Slag Based on FactSage 400
40 Study on Oxidation Roasting Process of Cathode Sheets from Spent Lithium Ion Batteries 407
Author Index 420
Subject Index 423

Erscheint lt. Verlag 15.1.2020
Reihe/Serie The Minerals, Metals & Materials Series
Zusatzinfo XVIII, 434 p. 220 illus., 171 illus. in color.
Sprache englisch
Themenwelt Technik Maschinenbau
Schlagworte CO2 management • conference proceedings • Energy Materials • energy technology • Metallurgy • Recycling • Waste heat recovery
ISBN-10 3-030-36830-0 / 3030368300
ISBN-13 978-3-030-36830-2 / 9783030368302
Haben Sie eine Frage zum Produkt?
PDFPDF (Wasserzeichen)
Größe: 20,1 MB

DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasser­zeichen und ist damit für Sie persona­lisiert. Bei einer missbräuch­lichen Weiter­gabe des eBooks an Dritte ist eine Rück­ver­folgung an die Quelle möglich.

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seiten­layout eignet sich die PDF besonders für Fach­bücher mit Spalten, Tabellen und Abbild­ungen. Eine PDF kann auf fast allen Geräten ange­zeigt werden, ist aber für kleine Displays (Smart­phone, eReader) nur einge­schränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.

Zusätzliches Feature: Online Lesen
Dieses eBook können Sie zusätzlich zum Download auch online im Webbrowser lesen.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Mehr entdecken
aus dem Bereich
Funktion, Gestaltung und Berechnung

von Karl-Heinz Decker; Karlheinz Kabus

eBook Download (2023)
Carl Hanser Fachbuchverlag
39,99