Structural Integrity Assessment of Engineering Components Under Cyclic Contact (eBook)

eBook Download: PDF
2019 | 1st ed. 2020
XIII, 313 Seiten
Springer International Publishing (Verlag)
978-3-030-23069-2 (ISBN)

Lese- und Medienproben

Structural Integrity Assessment of Engineering Components Under Cyclic Contact - Oleksandra Datsyshyn, Volodymyr Panasyuk
Systemvoraussetzungen
96,29 inkl. MwSt
  • Download sofort lieferbar
  • Zahlungsarten anzeigen
This book focuses on surface layers fracture of cyclical contacting bodies (machine parts). Calculation models and calculating procedures of stress-strain states of cyclically contacting solids with cracks, are included. Recommendations for the optimization of operating parameters of joints (contact stresses magnitude, friction/lubrication conditions, materials crack resistance etc) for elements of rolling pairs (wheel-rail systems, backup roll - working roll of rolling mills etc.) and some fretting pairs are formulated.

Surname and forenames:  DATSYSHYN Oleksandra Petrivna

Title: Dr. Sc. (Eng.); Ph. Dr. (Phys., Math.); Leading Research Scientist

Address of the Institution:

Karpenko Physico-Mechanical Institute of National Academy of Science of Ukraine,
5, Naukova St., 79060, Lviv, Ukraine
Tel.: 38(032)2540065,   Fax: 38(032)2649427

Education:

1947-1957  Secondary School

1953-1957  Music School

1957-1962  Mathematics and Mechanics Faculty, Ivan Franko State University, Lviv, Ukraine

1965-1968  Post graduate courses at Karpenko Physico-Mechanical Institute of National
          Academy of Science of Ukraine

1974  Candidate of Sciences (Ph. Dr. (Phys., Math.))

2008  Doctor of Sciences (Eng.)

Short scientific biography:

Since 1962 up till now Dr. O.P.Datsyshyn works in Karpenko Physico-Mechanical Institute of National Academy of Science of Ukraine. Since 2008 up till today she works as Leading Research Scientist.

In 1974 O.P.Datsyshyn maintained the candidate thesis entitled 'Limiting equilibrium of plates, weakened by system of cracks' and was obtained the title of Philosophy Doctor (Phys., Math.).

In 2008 Dr. O.P.Datsyshyn maintained the doctor thesis entitled 'Computational models of fracture mechanics for estimation of solids durability under their cyclic contact interaction' and was obtained the title of Doctor of Sciences (Eng.).

In 1980 she was a visiting lecturer in Ivan Franko State University (the course 'Mathematical Problems of the Theory of Cracks').

Since 1980 till 1988 Dr. O.P.Datsyshyn worked as a Secretary of All-Union Scientific Programme 'Physico-Chemical Mechanics of Brittle Fracture'.

Since November 4 to November 30, 1995 she worked as a visiting scientist in different scientific centers of India within the frames of Indo-Ukrainian Programme of cooperation in science and technology (Regional Research Laboratory, Bhopal; Defense Metallurgical Research Laboratory, Hyderabad; National Aerospace Laboratory, Bangalor).

Under the nomination UK Royal Society Dr. O.P.Datsyshyn worked in Advanced Railway Research Centre at the University of Sheffield in 1996.

In 1995 Dr. O.P.Datsyshyn was awarded a State Prize of Ukraine in the field of Science and Technique.

Since 1992 O.P.Datsyshyn is the Member of Ukrainian Society of Fracture Mechanics (USFM) and since 2000 she is the Member of European Structural Integrity Society (ESIS) (in particle - Member of TC24 - Integrity of Railway Structure). 

Area specification:

Mechanics of deformable solid, mathematical cracks theory, contact fatigue fracture mechanics, rolling contact fatigue, fretting fatigue, mathematical modeling of the fatigue cracks growth and damages formation (fracture and wear processes), durability of rail/wheel systems.

Publications:

She has over 175 published scientific papers, among them publications in international journals 'Wear', 'Engineering Fracture Mechanics', 'International Journal of Fatigue', 'International Journal of Fracture' and one monograph.

Citation Report:  h-index  -  7  (Scopus, Web of Science)




Surname and forenames: PANASYUK Volodymyr Vasyliovych

Title: Dr. Sc. (Eng.); Professor, Academician of the National Academy of Sciences of Ukraine

 Address of the Institution:

Karpenko Physico-Mechanical Institute of the National Academy of Science of Ukraine,
5, Naukova St., 79060, Lviv, Ukraine
Tel.: 38(032)2648688,   Fax: 38(032)2649427

Education:

1947-1951   Physics and Mathematics Faculty, Ivan Franko State University, Lviv, Ukraine

1951-1954  Post graduate courses at Machine Science and Automatic Institute of the Academy of Sciences of Ukraine (now Karpenko Physico-Mechanical Institute of the National
          Academy of Science of Ukraine

1954 - Candidate of Sciences (Ph. Dr. (Phys., Math.))

1967 - Doctor of Sciences

1968 - Professor (Eng.)

Short scientific biography:

Since 1951 up till now Prof. V.V. Panasyuk works in Karpenko Physico-Mechanical Institute of National Academy of Science of Ukraine. During 1971-2014 he was of the Director and since 2015 the honorary Director of the Institute.

In 1967 Dr. V.V. Panasyuk the doctor thesis entitled 'Some problems on crack propagation in deformed brittle body' and was obtained the title of Doctor of Sciences (Eng.).

Since 1978 Prof. V.V. Panasyuk is an Academician of the National Academy of Sciences of Ukraine (during 1972-1977 - Corresponding member of NASU).

Prof. V.V. Panasyuk was awarded the prizes named after the outstanding scientists of Ukraine (1974, 1994, 2002), was the winner of the State Prizes of Ukraine (1977, 1995) and the winner of the State Prize of USSR (1986), was awarded Griffith Medal of the European Structural Integrity Society (ESIS, 2000). He was decorated with Orders and Medals of the USSR and Ukraine.

Prof. V.V. Panasyuk was the Chairman of the 8th International Congress on Fracture (ICF-8) Organizing Committee that was held in Kiev (1993).

Prof. V.V. Panasyuk since 1976 is an Editor-in-chief of the scientific-technical journal 'Physicochemical Mechanics of Materials' (this journal in published by Springer as 'Materials Science'). He is the President of Ukrainian Society on Fracture Mechanics (since 1992). 

Area specification:

Fracture mechanics, mechanics of deformable solid, mathematical cracks theory, contact fatigue fracture mechanics, stress-strain state and limiting equilibrium of elasto-plastic bodies with cracks, contact problems of the elasticity theory, problems of the physicochemical mechanics of materials, materials durability and the crack growth resistance. . He also is the author of the well-known ?c-model, which is widely used now in fracture mechanics. 

Publications:

He has over 500 publications, among them publications in international journals, 'Engineering Fracture Mechanics', 'International Journal of Fatigue', 'International Journal of Fracture' and 20 monographs.

Citation Report: H-index - 11 (Scopus, Web of Science)


Preface 6
Acknowledgements 10
Contents 11
1 Contact Lifetime Estimation Methods for Tribojoint Elements. A Survey 14
1.1 Fatigue Fracture Mechanics 14
1.2 Methods of Mathematical Theory of Cracks 17
1.3 Model Schemes of Contact Interactions. Contact of Crack Faces 18
1.4 Contact Interactions in Tribojoints. Phenomenological Models 21
1.5 Pitting and Spalling 23
1.6 Nearsurface Cracks Growth Paths. Estimation of Contact Lifetime 24
1.7 Contact Fatigue and Wear 26
References 26
2 Calculation Model for Estimation of Cyclic Contact Lifetime of Body with Cracks 37
2.1 Classical and Nonclassical Approaches 37
2.2 Force Approach in Fracture Mechanics. Linear Fracture Mechanics 40
2.3 Fatigue Fracture. Classical Approach 45
2.4 Cyclic Contact Interactions. Contact Fatigue 47
2.5 Typical Contact Fatigue Damages 49
2.6 Mechanics of Materials Fatigue Fracture. Fracture Diagrams 57
2.6.1 Calculation Model for Estimation of Movable and Immovable Joints Contact Lifetime by Criteria of Contact Fatigue Damages Formation 60
References 70
3 Singular Integral Equations for Some Contact Problems of Elasticity Theory for Bodies with Cracks 77
3.1 Some Input Theses and Relations for Plane Problem of Elasticity Theory 77
3.2 Stress-Strain State of Elastic Plate With Smooth Curvilinear Cut 86
3.3 Stress Intensity Factors 89
3.4 System of Curvilinear Cracks in Elastic Plane. Singular Integral Equations 95
3.5 Method of Mechanical Quadratures 102
3.6 System of Curvilinear Cracks in Elastic Half-Plane. Singular Integral Equations (Crack Faces Are Not in Contact) 105
3.7 Singular Integral Equation for Single Curvilinear Crack in Elastic Half-Plane 115
3.8 Stress Intensity Factors for Curvilinear Cracks (Internal and Edge) in Half-Plane 118
3.9 Influence of Model Contact Loads Shape (Distribution) on Stress Intensity Factors for Edge Rectilinear Crack 126
3.10 Edge Crack with Contacting Faces in Half-Plane Under Action of Moving Hertz Load 137
References 148
4 Rolling Contact Fatigue 151
4.1 Rolling Under Boundary Lubrication Conditions. Pitting Formation 152
4.1.1 Edge Crack in Contact Zone Under Transverse Shear Conditions 153
4.1.2 Edge Crack Under Normal Opening Conditions. Pitting Formation 173
4.1.3 Residual Contact Lifetime of Rolling Pair Elements by Criterion of Pitting Formation with Consider the Cyclic Crack Growth Resistance Characteristics of Materials 180
4.1.4 Conclusions 190
4.2 Spalling 191
4.2.1 Subsurface Crack in Contact Zone Under Transverse Shear Conditions 193
4.2.2 Subsurface Crack in Contact Zone Under Normal Opening Conditions 199
4.2.3 Subsurface Cracks Growth Paths 208
4.2.4 Residual Contact Lifetime of Rolling Pair Elements by Spalling Formation Criterion 214
4.2.5 Conclusions 221
4.3 Rolling Under Dry Friction Conditions or Contact Surface Wetting. Squat (“Dark Spot”) Defects 222
4.3.1 Foreword Theses 222
4.3.2 Shallow Edge Cracks Growth 225
4.3.3 Branched Crack 233
4.3.4 Conclusions 241
4.4 Evolution of Edge Parallel Cracks System. Checks 242
4.4.1 Edge Parallel Cracks in Compression Zone 243
4.4.2 Edge Parallel Cracks Growth by Normal Opening Mechanism. Crumbling 250
4.4.3 Conclusions 261
References 262
5 Fretting Fatigue Fracture 267
5.1 Foreword Theses 267
5.2 Edge Crack Mouth Outside the Contact Section. Full Slipping Between Contacting Bodies 272
5.3 Crack Mouth Under Counterbody. Full Slipping Between Fretting Pair Elements 284
5.4 Partial Slipping Between Contacting Bodies 295
5.5 Influence of Rounding of Counterbody Base Edges 307
5.6 Shear and Opening Edge Cracks in Contact Zone of Fretting Pair Elements 315
5.7 Conclusions 321
References 323

Erscheint lt. Verlag 8.8.2019
Reihe/Serie Structural Integrity
Structural Integrity
Zusatzinfo XIII, 313 p. 183 illus., 1 illus. in color.
Sprache englisch
Themenwelt Technik Maschinenbau
Schlagworte Contact fatigue • Crack growth paths • Cyclic contact • Damage formation • Fatigue crack growth • fretting fatigue • Fretting wear • Rolling contact fatigue
ISBN-10 3-030-23069-4 / 3030230694
ISBN-13 978-3-030-23069-2 / 9783030230692
Haben Sie eine Frage zum Produkt?
PDFPDF (Wasserzeichen)
Größe: 14,2 MB

DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasser­zeichen und ist damit für Sie persona­lisiert. Bei einer missbräuch­lichen Weiter­gabe des eBooks an Dritte ist eine Rück­ver­folgung an die Quelle möglich.

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seiten­layout eignet sich die PDF besonders für Fach­bücher mit Spalten, Tabellen und Abbild­ungen. Eine PDF kann auf fast allen Geräten ange­zeigt werden, ist aber für kleine Displays (Smart­phone, eReader) nur einge­schränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.

Zusätzliches Feature: Online Lesen
Dieses eBook können Sie zusätzlich zum Download auch online im Webbrowser lesen.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Mehr entdecken
aus dem Bereich