Materials Science and Technology VIII

Preface, Committees and Sponsors
Chapter 1: Materials for Biomedical Application

In Vitro Resorbability of Three Different Processed Hydroxyapatite
Bleached Shellac as an Alternative Polymeric Matrix for In Situ Microparticle
Metrodidazole In Situ Forming Eudragit RS Gel Comprising Different Solvents
Physical and Mechanical Characterizations of Oxidized Regenerated Cellulose/Polycaprolactone Composite for Use as a Synthetic Dura Mater
Physical Properties of Xyloglucan/Bacterial Cellulose Composite Film Plasticized with Glycerol
Preparation and Characterization of Polymer Blends from Nang noi srisaket 1 Silk Fibroin, Gelatin and Chitosan Nanofiber Mats Using Formic Acid Solution
Sintered Titanium-Hydroxyapatite Composites as Artificial Bones
Synthesis and Characterization of Artificial Bone Material Using Calcium from a Natural Source
Properties of Deproteinized Natural Rubber Latex/Gelatinized Starch Blended Films
Chapter 2: Ceramic-Based Materials
Application of Statistical Analysis in the Powder Injection Molding (PIM) of Mullite
Composition-Microstructure-Property Relationships in BaTiO3 with Mg Addition
Compressive Strength in Various Submersion Tests of Fired Clay Bricks from Chi River Sub-Basin
Dispersion Stability of Drinking Water Treatment Sludge
Effect of Rice Husk and Rice Husk Ash on Properties of Lightweight Clay Bricks
Effect of Silica to Alumina Ratio on the Compressive Strength of Class C Fly Ash-Based Geopolymers
Effect of Sintering Additive and Pyrolysis Temperatures on Porous Silicon Carbide
Effects of Water Temperatures on Water-Soluble Binder Removal in Ceramic Materials Fabricated by Powder Injection Moulding
Electromechanical Displacement of Soft/Hard PZT Bi-Layer Composite Actuator
Fabrication of Fiber Cement Using Tobacco Stalk Pulp from Agricultural Residue
Influence of Alkaline Concentration on Physical Properties of Porous Geopolymer Using Silica Fume as Foaming Agent
Influences of Inhibitor and Firing Temperature on Efflorescence Reduction of Clay Products
Microstructure and Properties of Zirconia Toughened Alumina Fabricated by Powder Injection Moulding
Morphology and Phase Composition of Sol-Gel Derived Aluminum Borate Nanowhiskers
Preparation and Characterization of Clays from Different Areas in Ban Bo Suak, Nan Province, Thailand
Preparation and Properties of PSZTM Ceramics with Different Methods
Properties of Sintered Brick Containing Lignite Bottom Ash Substitutions
Properties of Steel Fiber Reinforced Geopolymer
The Effect of Alumina/Glass Composite Composition on the Adhesion and Strength of a 96% Alumina Joint
The Effects of Solvents on the Solvothermal Synthesis of BiVO4 Photocatalyst Powders
The Effects of Water Removal Process on the Properties of Magnesium Aluminate Spinel Nanopowders Synthesized by Co-Precipitation Method
The Study of Physical and Thermal Conductivity Properties of Cement Paste Containing Nanosilica
Utilization of Glass Cutting Sludge and Sanitary Ware Sludge in Ceramic Pressed Bodies
Effect of Firing Temperature and Mo Doping on the Synthesis of Solar-Reflective Sm2Ce2O7 Yellow Pigment
Effect of Bi2O3 on Thermal Properties of Barium-Free Glass-Ceramic Sealants in the CaO-MgO-B2O3-Al2O3-SiO2 System
Figures of Merit of Low-Cost CuAl0.9Fe0.1O2 Thermoelectric Material Prepared at Different Solid State Reaction Sintering Temperatures
Study of the Hydrolytic Resistance of Glass Bottles under a High Fluctuated Weather Condition
The Effect of Heat Treatment on Fe2+/Fe3+ Ratio in Soda-Lime Silicate Glass
Chapter 3: Materials and Technologies for Fuel Production
Comparison of Pyrolysis of Jatropha Cake with Different Catalysts Using PY-GC/MS
Cu/ZnO Catalysts for Enhancing the Methanol Selectivity in Fischer-Tropsch Synthesis
Effect of Gallium Loading on Reducibility and Dispersion of Copper-Based Catalyst
Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation
Preparation of Co/SiO2-Al2O3 Fiber Catalyst by Electrospinning for Fischer-Tropsch Synthesis
Electrochemical Fabrication of Cu2O Photocathode for Photoelectrochemical Hydrogen Evolution Reaction
Visible Light Driven Photocatalytic Hydrogen Evolution by Lanthanum and Carbon-co-Doped NaTaO3 Photocatalyst
Utilization of Waste Enamel Venus Shell as Friendly Environmental Catalyst for Synthesis of Biodiesel
Total Energy Requirement for Hydrogen Production Reactor Using Various Porous Media Materials
The Effect of Ternary Catalyst Atomic Ratios (PtRuSn/C and PtRuNi/C) on Ethanol Electrooxidation for Direct Ethanol Fuel Cell
LPG Synthesis from Syngas over Cu/ZnO-Pd-β Catalysts Prepared by Ultrasonic Spray Pyrolysis
Chapter 4: Eco-Friendly Materials, Technology and Materials in Environmental Engineering
Gas-Sensing Properties of Pt-V2O5 Thin Films for Ethanol Detection
High Density Polyethylene Catalyst Waste as a Filler in Papermaking
Material Safety and Integrity of Water-Filled Low-Density Polyethylene Bags in an Accelerated Weathering Investigation for Applications in Solar Water Disinfection (SODIS)
Photocatalytic Degradation of Phenol by Impure BiFeO3 under Visible Light Irradiation
Pomelo (Citrus maxima) Peel-Inspired Property for Development of Eco-Friendly Loose-Fill Foam
Treatment of Textile Dyeing Wastewater by Electrocoagulation
Effect of Crystallinity of Hydroxyapatite Nanoparticles Prepared from Bovine Bone on Adsorption of Ammonia Gas
Fabrication and Photocatalytic Degradation of TiO2/Porous Activated Carbon-Zeolite Composite Cylinder
Fabrication of Zeolite Na-A and Activated Carbon Composites by Slip Casting for Drinking Water Filtration
Forming of Zeolite/Carbon Composite Substrate Coated with Titania for Photocatalyst Decomposition of Organic Compound
Homogeneous Precipitation Synthesis and Sintering of Magnesium Aluminate Spinel Nanoparticles
Influence of Carbon Nanotubes on Photocatalytic Activities of Titanium Dioxide Nanocomposite Powders
Organic Based Heat Stabilizers for PVC: A Safer and more Environmentally Friendly Alternatives
Chapter 5: Steels, Metals, Alloys and Intermetallic Compounds
Fe-Sn Intermetallics Synthesized via Mechanical Alloying-Sintering and Mechanical Alloying-Thermal Spraying
Machined Surface Quality of Pre-Sintered Hardenable PM Steel
Microstructural and Phase Analysis of Service-Exposed Ni-Cr Alloy Turbine Blade
Sintered Frictional SiC-Reinforced Cu-Base Composites
Application of Numerical Method and Statistical Analysis in the Integrated Intensity Calculation of the Peaks from the X-Ray Diffraction (XRD) Pattern of α-Iron
Investigation of Fracture Location of T22/T91 Dissimilar Welds
Chapter 6: Polymers and Composites
Biaxially-Stretched Poly(Lactic) Acid (PLA) and Rubber-Toughened PLA Films: Tensile and Physical Properties
Characterizations of Fluorine-Containing Polybenzoxazine Prepared by Solventless Procedure
Characterizations of Silicon Carbide Whisker-Filled in Benzoxazine-Epoxy Shape Memory Polymers
Effect of Fiber Surface Modification on Properties of Artificial Leather from Leather Fiber Filled Natural Rubber Composites
Effect of Particle Sizes on Film Formation Behavior of Heveabrasiliensis Natural Rubber Latex
Effect of Various Extracted Solvent on DPPH Radical Scavenging Activity of Natural Rubber
Effects of Particles Size of Nanosilica on Properties of Polybenzoxazine Nanocomposites
Fabrication and Application of Nanostructures Using Gas-Assisted Hot Embossing and Self-Assembled Nanospheres
Fabrication of Novel Polyhydroxybutyrate-co-Hydroxyvalerate (PHBV) Mixed with Natural Rubber Latex
Functionalization of Styrene-Butadiene Rubber and Skim Latex by Photo-Catalytic Reaction Using Nanometric TiO2 Film as a Photocatalyst
Improvement of Filler-Rubber Interaction by Grafting of Acrylamide onto Saponified Natural Rubber under Ultraviolet Radiation as a Continuous Process
Improvement of Structure and Properties of Nanocomposite Foams Based on Ethylene-Vinyl Acetate (EVA)/Natural Rubber (NR)/Nanoclay: Effect of NR Addition
Influence of Processing Oil Based on Modified Epoxidized Vegetable Oil with N-Phenyl-p-Phenylenediamine (PPD) on Extrusion Process Behaviors of Natural Rubber Compounds

In Situ Reinforcement of PLA Using Nylon 6 in PLA/Nylon 6 Extrudate Blend via Twin-Screw Extrusion
Investigation of Synthesis Parameters for Modification of Chitosan with Enrofloxacin
Mechanical and Thermal Properties of Hemp Fiber Reinforced High Density Polyethylene Composites
Mechanical and Thermal Properties of Silane Treated Pineapple Leaf Fiber Reinforced Polylactic Acid Composites
Mechanical Properties of All-Cellulose Composites Made from Pineapple Leaf Microfibers
More Values of L-Quebrachitol from Skim Natural Rubber Latex
Morphology and Mechanical Properties of Polyoxymethylene and Acrylonitrile-Butadiene-Styrene Blends with Compatibilizer
Organomodified Clay and its Influence on Thermal and Fire Behaviors of Clay/Fire Retardant/Poly Vinyl Ester Composites
Photocatalytic Activity and Properties of Nanotitanium Dioxide-Filled Natural Rubber in the Presence of Coupling Agents
Polycarbonate Track-Etched Membranes by Nuclear Fission Reaction: Preparation and Characterization
Preparation and Characterization of Natural Rubber/Chitosan Films
Properties of Thermoplastic Elastomer Composites Prepared from Para Rubber Wood Sawdust Filled-Polypropylene/Natural Rubber Blends
Spectroscopic and Thermo–Mechanical Studies of Liquid Crystal Elastomer
Surfactant Treatment and Leaching Combination Process for Preparation of Deproteinized Natural Rubber Latex
Synthesis and Characterization of PolyHIPEs Composites with Silica and Iron Oxide Nanoparticles
Thermal and Mechanical Properties of Acrylonitrile-Butadiene Rubber Modified Polybenzoxazine as Frictional Materials
Thermal Properties of Banana Starch Nanocrystals Prepared by Acid Hydrolysis as Reinforcing Filler
Use of Coir-Filled LLDPE as a Reinforcement for Natural Rubber Composite
Polyurethane Synthesis from Sugarcane Bagasse Organosolv and Kraft Lignin
Chapter 7: Coatings and Surface Engineering
Effect of Saccharin Sodium on the Microstructure and Hardness of Electrodeposited Ni-W Coatings
The Effects of O2:N2 Gas Ratios on Structural, Optical, Electrical Properties of TiOxNy Thin Film Deposited by Reactive DC Magnetron Sputtering
The Effect of Rotational Speed on Steel Pipe Lined Fe-WB Based Composite Coating by Centrifugal-SHS Process
The Influence of N2 Partial Pressure on Color, Mechanical, and Corrosion Properties of TiN Thin Films Deposited by DC Reactive Magnetron Sputtering
Changes in Structural, Morphological, and Corrosion Properties of CrN Thin Film Effected by Varying N2 Pressure in the Sputtering Process
Evaluation of Corrosion Performance of Zinc-Plated Underhood Automotive Fasteners Using Salt Spray Test
Low Cost Synthesis of Hydrophobic Aluminum Alloy for Self-Cleaning Applications
Preparation of Poly(Lactic Acid) Acrylate for UV-Curable Coating Applications
An XRD Phase Analysis of Al-F Re-Deposition Produced from Reactive Ion Etching
Chapter 8: Semiconductors and Materials for Microelectronics
Confined Growth of WO3 for High-Performance Electrochromic Device
Resistive Switching Behavior of Ti/ZnO/Mo Thin Film Structure for Nonvolatile Memory Applications
Effect of Sputtering Power on Morphological, Structural and Optical Properties of Al-Doped Zinc Oxide Film
Morphological and Magnetic Properties of Co100-xCux Film Prepared by RF-Sputtering
Physical and Optical Properties of Indium Oxide: Tin Nanoparticles Synthesized by Co-Precipitation Method
Surface Modification of Zinc Oxide Nanoparticles Using Polyethylene Glycol under Microwave Radiation
Comparative Study of Non-Annealing and Annealing on Properties of ITO Deposited by RF Magnetron Sputtering
Chapter 9: Techniques of Testing and Measurements
Analysis of Eddy-Current Measurement System for Residual Stress Assessment in Stainless Steel Grade 304
Correlation of Acoustic Emission and Corrosion Resistance of Lacquer Coatings on Tin-Free Steel
Nondestructive Evaluation for Duplex Stainless Steel Tube Using Multi-Frequencies Remote Field Testing
The Comparison of Acoustic Emission Activities between Material Integrity and Leakage during CNG Cylinder Testing
Chapter 10: Simulation and Design of Technological Equipments and Processes
Design of Runner and Gating Systems for the Investment Casting of 431 Stainless Steel Netting Hook through Numerical Simulation
Effect of Vortex Finder, Inlet and Body Diameter on Separation Efficiency of Hydrocyclone for Crude Palm Oil Industry
Effect of Weld Line Formation on Morphology and Mechanical Properties for 3D-MID Technology
Influence of Process Parameters on Spinning Force Using Finite Element Analysis and the Taguchi Method
Numerical Simulation of Fluid Mixing in Micro-Mixers
Production of a Permanent Mold Gravity Die Cast A356.0 Aluminum Alloy Motorbike Shock Absorber through Casting Simulation
Wet Etching Technique to Reduce Pyramidal Hillocks for Anisotropic Silicon Etching in NaOH/IPA Solution
Remaining Creep Life Assessment of Service Superheat Tube Boiler