Coating Technology for Vehicle Applications (eBook)
XII, 240 Seiten
Springer International Publishing (Verlag)
978-3-319-14771-0 (ISBN)
Sung Chul Cha is a Senior Research Engineer at the Hyundai Motor Group, Automotive, Research and Development Division, in Hwaseong, Korea. He received his Diploma of Engineering (1998) and a Doctor of Engineering degree (2001) in Georesources and Materials Engineering from RWTH Aachen, Germany. In 2002 he became a research associate and postdoc at the Department of Interface Chemistry and Surface Engineering at the Max Planck Institute for Iron Research (MPIE), Düsseldorf, Germany, and continued his research in the field of high temperature materials and reactions including coating technology. In 2005 he began work in the area of materials engineering and material properties at Siemens Power Generation, Mülheim a.d. Ruhr, Germany. Since 2007 he has been employed at the Hyundai Motor Group and responsible for the development of automotive materials. Dr. Cha has published over 20 scientific papers and holds more than 30 international patents. He was a keynote speaker, chair, and reviewer of the session on 'Coated Materials' (2014) and a reviewer and chair of the session 'Automotive Tribology' (2013) at the SAE World Congress & Exhibition and he was an invited keynote speaker for the SVC 2014 Conference.
Ali Erdemir is an Argonne Distinguished Fellow and Senior Scientist with international recognition and significant accomplishments in the fields of materials science, surface engineering and tribology. He received his B.S. degree from Istanbul Technical University in 1977 and M.S. and Ph.D. degrees in Materials Science and Engineering from the Georgia Institute of Technology in 1982 and 1986, respectively. His discoveries of nearly frictionless carbon and superhard nanocomposite coatings, as well as a range of novel nanolubricants and lubrication additives, have been hailed as major breakthroughs in the field. Erdemir's research is directed toward nanoscale design and large-scale manufacturing of new materials, coatings and green lubricants for a broad range of applications in manufacturing, transportation and other energy conversion and utilization systems where further increases in efficiency, reliability and environmental compatibility are the primary objectives. Erdemir has received numerous awards, including five R&D 100 Awards; holds 16 U.S. patents; and has published more than 290 papers, 18 invited book and handbook chapters, and two edited books. He is a Fellow of ASME, STLE, AVS, and ASM-International.
Sung Chul Cha is a Senior Research Engineer at the Hyundai Motor Group, Automotive, Research and Development Division, in Hwaseong, Korea. He received his Diploma of Engineering (1998) and a Doctor of Engineering degree (2001) in Georesources and Materials Engineering from RWTH Aachen, Germany. In 2002 he became a research associate and postdoc at the Department of Interface Chemistry and Surface Engineering at the Max Planck Institute for Iron Research (MPIE), Düsseldorf, Germany, and continued his research in the field of high temperature materials and reactions including coating technology. In 2005 he began work in the area of materials engineering and material properties at Siemens Power Generation, Mülheim a.d. Ruhr, Germany. Since 2007 he has been employed at the Hyundai Motor Group and responsible for the development of automotive materials. Dr. Cha has published over 20 scientific papers and holds more than 30 international patents. He was a keynote speaker, chair, and reviewer of the session on “Coated Materials” (2014) and a reviewer and chair of the session “Automotive Tribology” (2013) at the SAE World Congress & Exhibition and he was an invited keynote speaker for the SVC 2014 Conference. Ali Erdemir is an Argonne Distinguished Fellow and Senior Scientist with international recognition and significant accomplishments in the fields of materials science, surface engineering and tribology. He received his B.S. degree from Istanbul Technical University in 1977 and M.S. and Ph.D. degrees in Materials Science and Engineering from the Georgia Institute of Technology in 1982 and 1986, respectively. His discoveries of nearly frictionless carbon and superhard nanocomposite coatings, as well as a range of novel nanolubricants and lubrication additives, have been hailed as major breakthroughs in the field. Erdemir’s research is directed toward nanoscale design and large-scale manufacturing of new materials, coatings and green lubricants for a broad range of applications in manufacturing, transportation and other energy conversion and utilization systems where further increases in efficiency, reliability and environmental compatibility are the primary objectives. Erdemir has received numerous awards, including five R&D 100 Awards; holds 16 U.S. patents; and has published more than 290 papers, 18 invited book and handbook chapters, and two edited books. He is a Fellow of ASME, STLE, AVS, and ASM-International.
Preface
Energy consumption due to friction in motored vehicles and low-friction coatings to reduce it
Ali Erdemir, Kenneth Holmberg
Diverse Coatings for Engine Parts
Sung Chul Cha
Overview of DLC-coated engine components
Makoto Kano
Coating Technologies for Automotive Engine Applications
Arup Gangopadhyay
customized coating systems for products with added value from development to high volume production
Tim Hosenfeldt, Yashar Musayev, Edgar Schulz
Surface Treatments for Automotive Applications
Joerg Vetter
Hard Coatings and Coating Processes for the Automotive Industry
Andre Hieke, Val Lieberman, G.J. van der Kolk
Surface texturing for engine parts
Gerhard Flores, Andreas Wiens, Manuel Waiblinger
Coatings for Aluminum Die-casting Dies
Sung Chul Cha
Coatings for Forming Dies of Advanced High-Strength Steel
Sung Chul Cha
Diamond-like carbon coatings with special wettability for automotive applications
So Nagashima, MyungWoon Moon
Smart surfaces for lubrication – solid lubricants and adaptive texture
Tomas Polcar, Albano Cavaleiro
Decorative PVD coatings on Automotive Plastics
Thomas Krug, Roel Tietema
Index
Erscheint lt. Verlag | 20.4.2015 |
---|---|
Zusatzinfo | XII, 240 p. 189 illus., 164 illus. in color. |
Verlagsort | Cham |
Sprache | englisch |
Themenwelt | Technik ► Fahrzeugbau / Schiffbau |
Technik ► Maschinenbau | |
Schlagworte | Coatings on Dies • Coating Technology • Decorative Coating for Automotive • High Temperature Application • Metal forming • Reference Automotive Coatings • Surface Engineering • thermal spray • Tribology • Vehicle Coating • Vehicle Friction Reduction |
ISBN-10 | 3-319-14771-4 / 3319147714 |
ISBN-13 | 978-3-319-14771-0 / 9783319147710 |
Haben Sie eine Frage zum Produkt? |
![PDF](/img/icon_pdf_big.jpg)
Größe: 14,1 MB
DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasserzeichen und ist damit für Sie personalisiert. Bei einer missbräuchlichen Weitergabe des eBooks an Dritte ist eine Rückverfolgung an die Quelle möglich.
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich