Frontiers of Energy, Materials and Information Engineering -

Frontiers of Energy, Materials and Information Engineering

Buch | Softcover
1960 Seiten
2014
Trans Tech Publications Ltd (Verlag)
978-3-03835-277-8 (ISBN)
539,95 inkl. MwSt
  • Titel nicht im Sortiment
  • Artikel merken
Selected, peer reviewed papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong
Collection of Selected, Peer Reviewed Papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong.
The 411 papers are grouped as follows:
Chapter 1: Materials and Chemical Engineering and Technologies,
Chapter 2: Power, Energy and Thermal Engineering, Environmental and Safety Engineering,
Chapter 3: Civil and Building Engineering, Structural and Geotechnical Engineering, Applied Mechanics,
Chapter 4: Mechatronics, Measurement and Detection, Control and Automation, Mechanics Applications,
Chapter 5: Computer, Communication, Information, Algorithms and Numerical Methods of Data Processing Engineering,
Chapter 6: Urban and City Development, Traffic and Transportation Engineering,
Chapter 7: New Technologies in Education and Sports,
Chapter 8: Engineering Management, Production Management, Business and Economics.

Preface, Committees and Co-Sponsors
Chapter 1: Materials and Chemical Engineering and Technologies
A Kind of Novel Dual-Core High Birefringence Photonic Crystal Fiber
Application of a New Type of Fiber in Knitted Garment Industry
Bioactivities of Mimosa pudica and Phyllanthus niruri Crude Extracts Collected from the Locality of Chaiyaphum, Thailand
Composition and Microstructure of Cement-Like Materials Synthesized by Solution Combustion Technique
Cure Characteristics and Mechanical Properties of ZnO Nanoparticles as Activator in Unfilled Natural Rubber
Dispersion and Degradation of Polycarbonate/MWCNT Nanocomposites with Melt Extrusion
Effects of Build Orientations on Tensile Properties of PLA Material Processed by FDM
Effects of Preparation Parameters on Morphology of Cellulose Nanowhiskers
Electrochemical Behavior of Glucose Oxidase on Gold Electrode Modified by Poly(3, 4-Ethylenedioxy-Thiophene)
Electrochemical Degradation of Benzene in Water Using Platinum Supported on Carbon Black Materials
Experimental Research on Hard and Crack-Free Electrodeposited Chromium Coatings
Influence of Pouring Temperature on the Solidification Characteristics of A357 Aluminium Alloy
Interactions between TiAl and ZrO2 Face Coat during Centrifugal Investment Casting
Investigation of Nucleation and Crystallization Behavior of Li2O-MgO-Al2O3-SiO2-MgF2 Glass-Ceramics System
Investigation of the Influence of Electrolytic-Plasma Processing on Structural-Phase State and Mechanical Properties of the 40CrNiAl Alloy
Nonlinear Simulation Analysis on Steel Concrete Composite Beam with Rubber Aggregate
Numerical Simulation of Semi-Solid Die Casting Technology of Bearing Cage
Performance of an Maleic Anhydride Based Polymers as Scale Inhibitor and Iron (III) Scaling in Industrial Cooling Water Systems
Prediction of Solubilities for the Salt-Water System CaCl2-KCl-H2O at 348.15 K
Preparation of Helical Monosubstituted Polyacetylene@CdSe Quantum Dots Composite and its Application for Low Infrared Emissivity
Preparation of Photoluminescent ZnSe/PAMAM Nanocomposites
Simple Synthesis of Mesoporous SnO2 Microspheres and their Gas Sensing Properties
Study of Stress Distribution for Ceramic Materials in Human Denture by 3D Finite Element Model
Study of the Attenuation Characteristic of Electromagnetic Waves in Plasma Sheath
Study on Mechanical Properties and Mechanism of Sisal Fiber Cement Mortar
Study on Preparation and Properties of Foam Rubber from Natural Rubber Ribbed Smoked Sheet Using Salt of Amino Alcohol and Carbonic Acid as Foaming Agent
Synthesis and Effect of DCCA on the Ambient Pressure Dried, TEOS-Based Silica Aerogel
Synthesis of Zeolite from Blast Furnace Slag Using Alkali Fusion with Addition of EDTA
The Compatibility Research of the Organic Montmorillonites with SEBS
The Compositional Effect of Water-Soluble POSS Hybrid PNIPA Nanocomposite Hydrogels
The Effect of Polymerization Mode on the POSS Hybrid PVA Hydrogels
The Effect of Reaction Parameters on the Structural NaYF4 Microcrystals
The Effect of Water-Soluble POSS on the Swelling Behavior of Hybrid PDMAEMA Nanocomposite Hydrogels
The Mechanical Properties and Microstructure of High Temperature Ti Alloys with Minor Addition
The Study of Impact Behaviour of Two Types of Glass Fibre Reinforced Polymer (GFRP) Subjected to Low Velocity Impact
Thermally Activated Delayed Fluorescence Materials Based on Carbazole/Sulfone
Corrosion Resistance of Mg-Li Alloys Subjected to Different Heat Treatment
Morphosynthesis of Hierarchically Structured LDHs Using Cellulose Templates
Synthesis and Harmful Gas Sensing Properties of Zinc Oxide Modified Multi-Walled Carbon Nanotubes Composites
Effects of Four Antistaling Agents on Preservation of Nan Feng Tangerines
Spectroscopic Studies on the Interaction between Sulfadiazine and Human Serum Albumin
Plastic Application in Product Design
Research on the Durability of Reinforced Chemically Bonded Ceramics-Based Concrete Structural Members in Marine Environment
Chapter 2: Power, Energy and Thermal Engineering, Environmental and Safety Engineering
3D Numerical Simulation on Failure of Cement Sheath of Macondo Well-#1 in Deep Water Gulf of Mexico
A Research on Ignition of a Boiler by Using Coke-Oven Gas Instead of Light Oil and Alternation of the Boiler
A Research on Microwave and Conventional Pyrolysis for Low Rank Coal
A Study of Fenton’s Oxidation Pretreatment on Dye Wastewater Containing Acetic Acid
A Water Resource Distributed Detection System Based on Cloud Computing Technology
An Analysis of the Impact of Safety Insecurity and Atmosphere on Safety Behavior
An Analysis to the Understanding of Safety Equipment for Construction Workers
An Investigation of Radiant Heat Distribution on Drying Area in the Chamber of Infrared Rotary Dryer
Analysis for Mechanism of Becoming and Characterization of Cohesive Sediment of Tarim River
Analysis of Water Quality and Control Countermeasures of Yazidang Reservoir in Ningxia, China
Apparatus Determining Water Activity with Isopiestic Method and Measurement of Water Activity
Application of the Blast Furnace Top Gas Instead of Nitrogen after Pressurizing
Behavior of Flame Propagation in Biogas Spark Ignited Premix Combustion with Carbon Dioxide Inhibitor
Benefit Analysis and FGD Optimization for Designed Power Plant Based on Comprehensive Benefit Index System
Biodiesel Production from Waste Cooking Oil Using KCL/CaO as Catalyst
Calculation for Power Consumption of Main Transformer Cooling System in Hydropower Plant Based on Pearson Correlation Coefficient
Classification Prediction Method Used in Coal Crushing
Construction of User Response Subsystem for Energy Efficiency of Electric Power Supply and Demand System
Coordinated Control of Isolated Microgrid Including Wind Power, Storage and Seawater Desalination Load
Design and Performance Evaluation of Hot Air-Microwave Continuous Belt Dryer for Drying Block Rubber STR 20
Design of X-Ku Band Wilkinson Power Divider Using Synthetic Quasi-TEM Transmission Line
Diagnosis for Water and Steam Quality Problem in Taishan Ultra-Supercritical Power Plant
Distribution of Octylphenol and Nonylphenol in the Sediment of Kaohsiung Harbor, Taiwan
Effect of Fuel Injection Pressure & Fuel Supply Advance Angle on Characteristics of Butanol Diesel Blend Engine
Effect of Solid Particle on Rough Thermo-Elastohydrodynamic Lubrication with Non-Newtonian Lubricant
Environmental Worthiness Technology of Personal Protective Equipment
Evaluation on Potential Ecological Risk of Heavy Metals in Soil of Yanjiao
Experimental Studies on the Isothermal and Heat Transfer Performance of Trough Solar Power Collectors
Experimental Study on Adsorption Capacity of Natural Gas Odorant Tetrahydrothiophene in Soil and Relevant Influencing Factors
Fundamental Study of Energy Harvesting Using Thermoelectric Effect on Concrete Structure in Road
Implementation and Application of QoS in Power Ethernet Switch
Influence of Surfactant Sparys on Agglomeration of Inhalable Particle
Legal Regulation of Vegetables Quality and Safety
Numerical Simulation of Drag Coefficients for Multi-Bundled Power Transmission Conductors
Numerical Simulation of Ignition of Coke-Oven Gas on an Industry Boiler
Numerical Simulation of the Combustion and Emissions of HPDI Engine under Different Natural Gas Substitution Rate
Optimization Design of High Frequency Transformer for Multiple Outputs Switching Power Supply
Reliability Analysis for the Ignition System of Aviation Piston Engine in the GO Methodology
Remediation of Marine Sediments Contaminated with PAHs Using Sodium Persulfate Activated by Temperature and Nanoscale Zero Valent Iron
Remote Control of Heating System and Analysis of Energy Efficiency
Research of Inlet Air Quantity for Mechanical Cooling Tower
Research on a Portable Detection Device of DC Electric Energy in Electrical Vehicle Charging Station
Research on Technology Roadmaps of the Wind Power Industry Based on Bibliometrics and AHP Method - A Case Study of Wind Blade
Research Progress in Calculation Methods for Single-Well Dynamic Reserves of Gas Reservoirs
Review of Power System Harmonic Source Location Method Based on State Assessment
Risk Assessment on Fuzzy Fault Tree Analysis for Power Transmission Line Field Maintenance Work
Simulating the Spread of Smoke in Hostel Fires
Simulation Analysis of Temperature Field of Permanent Magnet Governor
Single Longitudinal Mode Fiber Laser Based on Saturated Absorber
Study on Environmental Protection Path via Government Procurement
Study on the Rules of Sedimentation in Ningxia Shuidonggou Reservoir
Supercritical Fluid Extraction of Lipids and Enrichment of DHA from Freshwater Fish Processing Wastes in Thailand
Thermal Characteristic Analysis of Rectangular and Large-Capacity Lithium-Ion Power Batteries
Air Gap between Protective Screen and Surface of Reinforced Concrete Cooling Tower
Distribution and Origin of Organic Carbon, Nitrogen and Phosphorus in Kaohsiung Harbor Sediments
Research on Reliability Evaluation Methods of Composite Generation and Transmission System
Experimental Research of Stone Coal Mixed with Biomass Pyrolysis
Differential Equation Based Adaptive Distance Relaying Setting Method for Series Compensated Line
Fuzzy Comprehensive Evaluation of Water Quality Management Information System
Research on Evaluation Method of Relay Protection Action Based on Fault Information
Research on Optimization of Perforated Horizontal Wells with Separated Production Scheme Based on Genetic Algorithm
Research on Physical Vulnerability Assessment Method of Grid Infrastructures - Taking Substation as an Example
Review of the Relationship between Harmonic and Parallel Capacitor Fault
The Comprehensive Assessment of Power Quality Based on Attribute Recognition Theory and AHP Algorithm
Two Kinds of Models Based on Fiber Grating Sensing Technology to Calculate Overhead Lines Sag and their Performance Comparison
Unit Commitment of Distribution Main Transformers Considering PV Penetration
Review of New City Viaduct Noise Barrier
Study on Building Climate Adaptability under the Condition of the Human Body Thermal Comfort - Taking Rural Houses in Shandong Peninsula as Example
The Design of the Household Photovoltaic Power-Supply System with Intelligent Expansion Capacity Based on STM32
A Novel Method to Estimate the State of Health of each Cell in Battery Pack
Research on HEV Drive System Based on Composite Electric Power
Design and Optimization of Dense Phase Desulfurization Tower
Chapter 3: Civil and Building Engineering, Structural and Geotechnical Engineering, Applied Mechanics
A Study of the Planning Methods in the Underground Work of Top-Down Construction in High-Rise Buildings
Design of Intelligent Building Security Systems Based on QFD
High Resolution Sequence Stratigraphy Characteristics and Distribution of Donghe Sandstone in Qunkuqiake Region in Tarim Basin
Pavement Performance of Asphalt Concrete Using Building Demolition Waste
Simulation of Earthwork Load-and-Carry System Based on GPSS World
Structural Behaviors of Hybrid High Performance RC Beams with Web Openings Using Hybrid Fibers
The Analysis on the Example that the Comprehensive Application of Cuplok Scaffolding and Steel Tubular Scaffold with Couplers in Large Span Beam Structure Support
The Mechanism of Monitoring and Incentive on Renewable Energy Building in Eco-City under the Background of New Urbanization
Water Flow in Unsaturated Porous Media by Finite Element Analysis
Quarry Wall Stability Assessment Using TLS Method
Study on the Impact of Lateral Pressure on Jointed Rock Mass with DDARF Method
Verticality Determining Methodology for the Reconstruction of a Building Shell – Analytical Solution
Optimum Design for the Independent Foundation Based on Parameterized Model and Criteria Method
Data Interpolation Methods by Inverse Distance Weighted Average Method between Multidisciplines
Effect of Mica Content in Stone Powder of Manufactured Sand on Performance of Cement Mortar
Dynamic Stability Analysis of Single-Layer Lattice Dome Considering Member Imperfections
Manufacturing and Hoisting Technology for Reinforcement Cage of Deep Foundation Excavation Bored Piles
Numerical Analysis of the Ball Mill Coupled with Vertical Vibration
Numerical Analysis of the Surface Aerodynamic Noise of the CRH3 High Speed Train
Numerical Analysis on Performance of Frame-Shear Structure with High Pile under Complex Load
The Analysis about External Compressible Flow around an Aircraft Wing
Application Retarders to Solve the Problem of Lift Joints
The Study on Design Solution for Energy Efficiency of Existing Residential Building (EEERB) to Realize the 4th Energy Efficiency Target
Investigations on the Wind Vibration Coefficient of Single Layer Lattice Barrel Vault Structures
Chapter 4: Mechatronics, Measurement and Detection, Control and Automation, Mechanics Applications
A Control Strategy with Series-Parallel Inverter for Micro-Grid Operation
A Method to Compensate the Dead Time for Three-Phase PWM Inverters
A New Method to Predict Gas Production Based on Fuzzy BP Artificial Neural Network
A Prediction Model for Equivalent Parameters of Rolling Guide's Joint
Accuracy Analysis of Robot Binocular Vision Calibration
Active Infrared Thermography for Defect Detection of Polyethylene Pipes
Agricultural Robot Localization Based on Camera Ranging
Anti-Lock Braking System is Working Principle and Troubleshooting
Application of Fuzzy Neural Network in the Intelligent Control of Biomass Gasifier
Application of PCR-SSCP Technology in Microorganism Detection
Augmented-Reality-Based Mechanical Fault Diagnosis Method
Automatic Loading AGV Servo Controller Based on ARM and FPGA
Automotive Anti-Collision Radar Signal Processing System Design Based on DSP
Base of Control and Transmission Technology
Based on PFC Prediction Algorithm of Cross-Cutting Machine Electronic CAM Control Simulation
Comparative Study on Several PQ and V/f Controller Models in Micro-Grid
Control of Thermal-Oxidative Degradation of Natural Rubber STR 5L by Using Cysteine Encapsulated with Alginate/Chitosan Microcapsules
Current Intensity and Magnetic Field Measurement Based on Circular Coil Magnetic Inclination
Design a PLC-Based Variable-Frequency Governing Pressure-Constant Water-Supply Control System
Design and Application Analysis of Coal Mine Belt Conveyor Automation System
Design for a S7-200-Based Boiler Temperature Cascade Control System
Design of Auto Dust Collection System in Different Regions of Blackboard
Design of Boiler Control System Model Based on Fuzzy Control
Design of Two-Wheeled Self-Balancing Robot Control System
Efficient Strip Belt Shelling and Air Suction Cleaning Units for Sunflower Seeds
Ethernet-Based Data Acquisition Technology of Open CNC System
Isotropic Design Method of Suspension System of Dithered RLG Strapdown Inertial Measurement Unit
Machine-Learning-Based Mechanical Fault Diagnosis Method
Maximum Power Control with a Boost Chopper and Grid Connection of PMSG Based Wind Turbine
Mechanical Parts Defect Detection Method Based on Blind Source Separation Algorithm
Micromagnetic Simulation of a Perpendicular Exchange-Coupled Magnet
Minimal Control Synthesis-Skyhook Mixed Control for Magneto-Rheological Semi-Active Suspension
Multi-Sensor N-P Criterion Fusion Detection Based on Weighting by SNR
Optimization of Tension Control System for Cold Rolling Exit Section
Prediction on Combat Effectiveness of Amphibious Assault Vehicles Based on Supporting-Vector Regression
Radar Non-Contact Life Parameter Detection System
Research of Screw-Machine Electrical Control System Based on IPC
Research on Automatic Test Techniques of CTCS-2 Level Train Control Center
Research on Intelligent Monitoring System on Tunnel Based on Neural Network
Research on Kinematic for the Mechanism of Wheel-Leg Mobile Robot with Multi-Sports Mode
Research on Monitoring Ice Thickness of Overhead Lines Based on FBG Sensor and Parabolic Method
Simulation Research of Direct Torque Control for Marine Permanent Magnet Synchronous Motor
Simulation Study on ESP Fuzzy Control Based on Road Automatic Identification
Structure Design and Control for Multifunctional Paint-Device
Study on the Fault Diagnosis of Gear Pump Based on PNN Neural Network
Study on Vibratory Loads of Rotor with Trailing Edge Excitation
System of Annealing Furnace Temperature Control Based on Neural Network
Temperature Control System of Chamber Electromechanical Based on Incomplete Differential PID Algorithm
The Design and Implementation of a Low Cost and High Precision Angle Measuring Device
Typical PD Type of GIS, Transformer, Switchgear and other Substation Equipment
Vehicle Stability Integrated Control Based on Adaptive Optimal Approach
Virtual Manufacturing of Straight Bevel Gear Based on Pro/E Wildfire
Voltage Control and Optimization of Distribution Network with DGs Based on Droop Characteristics
Analysis of Fatigue for Mental Bellows Based on ANSYS
Computer Aided Design of New Type PMSM Based on ISAD
Converter Station VBE Signal Monitoring System Based on LabVIEW
Research of Li-Ion Battery’s Protection Circuit Used in AGV
Research on Embedded Intelligent Vehicle Tracking Avoidance of Obstacle
Oil Source Valve Optimized Design and its Application in Mechanical Loader
The Application of TRIZ Theory in the Rub Drum of Reverse Data Acquistion and Modeling
Detection of the Chinese Rice Wine Using an Electronic Tongue
Offline Optimization of Parallel Hybrid Electric Vehicle Energy Management Strategy Based on the Dynamic Programming
Study on Characteristics of Simple Inductance Circuit under Cut-Off Discharge Mode
Study on Fault Location Technology of the OPGW Transmission Line
Analysis of Time Series to Wear Tendency of Aero-Engines
Damage Effectiveness Evaluation of Missile and Artillery Air Defense Group
Chapter 5: Computer, Communication, Information, Algorithms and Numerical Methods of Data Processing Engineering
A Corporate Computer Network Security System Design and Implementation
A Design of Roadheader Simulation Training System
A Detection Algorithm for Projectile Target
A Direction of Arrival Estimation Method for Wideband LFM Signals Based on RWT and ESPRIT Algorithm
A Distributed Index Tree and its Concurrency Control Algorithm
A Fast Method of Motion Errors Compensation for High Squint Millimeter Wave SAR
A Kind of DWT Domain Image Digital Watermarking Algorithm Research
A Method of XML to RDB Mapping Based on XML Schema
A New Approach for Developing Crossword Games
A New MSLBOLSR Routing Algorithm
A Novel Model for Human Activity Representation and Classification Based on Trajectory
A Retrieval Model of Spatial Configuration Based on Space Syntax Histogram
A Snapshot-Replay Method of Pseudo-Code Ranging under Frequency Limited Fading Channel
A Time Prediction Method Using Modified Neural Network
A Virtual Machine Migration Algorithm Based on Network Flow Balance
Adaptive Newton Algorithm in Computing the Upper Bound of Structured Singular Value
An Improved Algorithm for Ship Detection from the High-Resolution SAR Images
An Improved Filter Algorithm Based on Prior Points
An Object-Based Image Reducing Approach
Analysis of Dance Approach in the Perspective of Multimedia
Analysis of Forward-Looking Synthetic Aperture Radar Imaging Characteristics of Rotating Target
Analysis of the Characteristics of the Background Ambient Noise Origin of Infrasound Station
Analysising on the Library Services in the Age of Big Data
Application and Study of Virtual Private Network Base on L2TP-IPSec
Application of Synchronization Controlling for the Unified Chaos System in Secure Communication
Application of Wireless Sensors in Underground Mine Communication Operation
Attribute Reduction Based on Continuous Attribute Domain
Automatic Extraction of Domain-Specific Terms
Based on Binary Image Information Hiding Overview
Based on Digital Image Forensics Double JPEG Compression Algorithm
Based on the RMXP RPG Game Design and Implementation
City Electronics Furniture Store System Order Based on ASP.NET
Derivation of Exact Solutions for the (3+1)-Dimensional KP Equation with (G'/G2)-Expansion Method
Design and Application of a Communication System Based on Codesys
Design and Implementation of Mobile Learning Terminal Platform of Network Course Based on Android
Design and Implementation of UDP-Based Coal Mines Enterprises Internal LAN Communications Software
Design of a Novel EBG Structure for Antenna Arrays
Detrended Fluctuation Analysis of Heart Rate Variability in Noise Exposure
Driver of CAN BUS Based on ARM Cortex-M3
Efficiency Analysis of Command Networks with Different Cross-Level
Embedded System Application in the Set-Top Box
Extracting Foreground Based on Codebook for Early Forest Smoke Video
Face Recognition Based on Eigenface Image Reconstruction and Fisherface
Free Cooling in High Heat Density Data Centers
Graph Embedding Method Based on Space Syntax and Improved K-Means Clustering
Graphic Image Processing Technology in the Application of the Film and Television Creation
Image Fusion Algorithm Based on Contourlet Transform
Image Tampering with Evidence Algorithm Based on Copy and Paste
Improved XCS in Classification Problems
Infrared Target Detection Based on Temporal-Spatial Domain Fusion
Intensity of Coal and Gas Outburst Prediction Model Based on the Improved BP Neural Network
Laser Active Image De-Noising Algorithm Based on Lifting-Wavelet
Matching Research of Binary Image Based on Canny Operator and SIFT Algorithm
Method of Software Development Research Based on Mobile Platform
Numerical Studies of X Band AbFSS Antenna Radome
On the Comparison and Design of Computer-Aided Translation Software
Optimal Deployment Based on Tree in Multilayer Mobile Sensor Network
Oscillation Criteria of First Order Nonlinear Neutral Differential Equations
Oscillation of Unstable Second Order Neutral Differential Equations with Positive and Negative Coefficients
Performance Analyses of MCN with PH-Renewal Arrival Call and Services
Preliminary Study of Multiband Smokescreen’s Interference with TV Guidance
Private Clouds Technique Based on Honeynet
Program Design of Internet-Based Remote Video Monitoring System of Coal Mining Enterprises
Real-Time Human Detection Based on the Improved Local Binary Pattern
Recurrence Plot Analysis of HRV for Exposure to Low-Frequency Noise
Redundant Feature Selection Methods in Text Classification
Research and Design of Mobile Payment Platform Based on Hybrid APP Technology
Research of from Theory to Practice about Computational Thinking
Research of Multidimensional Dynamic Web Report
Research of Reconfigurable Measurement Method Based on Mobile Terminal
Research on Algorithm of Delaunay Triangulation Net Interpolating the Best Point
Research on Anti-Jamming RF-EAS System
Research on Connection Ending Protocol on Single-Layer User-Data Switching Platform Architecture
Research on Fast-Speed Differential Light-Flow Algorithm
Research on Network Information Security and Protection
Reverse Validation Based Adaptive Particle Filter Algorithm for Object Tracking
Review on Real-Time Communications Technology in Web Application
Scheduling of Multi-Objective Imaging Observation Tasks for High-Altitude Airship Based on Improved NSGA-II Algorithm
Segmented Auxiliary Power Model Based on Particle Swarm Optimization
Smart Service-Awareness Based Multi-Agent QoS Control Model for Distribution Communication Network
Study of Space-Surface Bistatic SAR Imaging Algorithms with COMPASS Signal
Study on a Novel FSS-Absorber Radome
Study on Data Processing in Optical Fiber Gas Sensing System Based on Membrane Computing
Study on Dynamic IR Image Generation of Space Target
Study on Electromagnetic Protection Technology of Mine Emergency Communication Command Works
Study on Image Matching Based on Speed up Robust Features Method
Study on Necessary and Sufficient Conditions for Euler Graph and Hamilton Graph
Study on the Characteristics of High Speed near Field Communication Antenna Based on FDTD
Study on the Method of Feature Extraction of Vegetable Diseases Based on Image Processing
SVM-GMM Based Speaker Identification
Technical Principle and Application of H3C IRF
The Analysis and Design of the Dynamic Information Service System Network Architecture of the SOA Based on WAVE Technology
The Application of Intelligence Distribution Network Communication Based on EPON
The Application of Kernel Methods for Image Classification
The Application of SIFT Method towards Image Registration
The Design of the Enterprise Network Security Solutions
The Development of Employee Information Management System
The Oil and Gas Pipeline SCADA System Based on Cloud Computing and the Scheduling Algorithm
The Present Botnet Protection Situation of the Data Center
The Research and Development of Vehicle Network Platform Based on OBD
Two Meta-Heuristics for Solving Unconstrained Optimization Problems and Machinery Problems
University Data Center Design of IPv6 Deployment
Valuable Tourism Information via Mobile Application
Adaptive Ensemble Learning Recommendation Algorithm
An IEC61850 Communication Model for Network Devices in Smart Substation
Research and Application of SVG in the Feeder Data Analysis System Based on Ajax
Research on Efficiency Evaluation Model of Electric Power Information System
Infrared Image Preprocessing Based on Top-Hat Transformation and Self-Adaption Threshold Segmentation
Research on Electric Power Communication Optical Fiber Transmission Network Evaluation and Optimization Method
Speech Enhancement on Over-Complete Dictionary and Threshold Orthogonal Matching Pursuit
Development of GIS PD Location System Based on LabVIEW
Some Problems and Measures in the Characteristic Database Building of Library
Development and Application of a NS PD Pulse Simulation Circuit
Functional Requirements in Video-on-Demand Transmission System
Optimized Collaborative Filtering Recommendation Based on User’s Social Relationships
Research on Facial Feature Detection Based on Correlation Analysis
The Books Management System Management System Development
Optical Fault Injection Attacks against Cipher Chip
The Application of Web Data Mining Technology in E-Commerce
Short-Term Hydrothermal Scheduling Based on Harmony Search Algorithm
Chapter 6: Urban and City Development, Traffic and Transportation Engineering
A Study on Land Use Scape Pattern Changes Based on Fractal Theory - Case Study of Mingcheng Town of Panshi City in Jilin
Application of GIS-Technologies for Architectural Heritage Management
Augmented Reality-Based Virtual Scenic and Tourism Culture Creative Platform Research
The Research Reports of Urban Memory of Yichang
Rural Tourism and Rural Development under the Integrated Planning Background - Huangtuling Village Tourist Plans in Laiyuan, Baoding
City Occupancy and Road Capacity Model
LED Roadway Lighting Control Scheme Based on TALQ Protocol
Simple GPS Automatic Navigation Design
Quality Control and Testing of CIPP Liners
Highway Lane Detection Based on a New Gray Method
Freeway Infrastructure Safety and Emergency Management System
Chapter 7: New Technologies in Education and Sports
A Research of the Application of Visual Simulation Technology in College English Teaching
A Study on Improving the Quality of All-English Teaching Teachers in Science and Engineering Universities and Colleges
Analysis of China's Sports Apparel Industry Marketing Strategy Vocational Colleges
Application Research of Information Technology in Music Education
Based on the Management of Japanese Teaching Methods to Explore
Based on the Students' Application Ability of Japanese Teaching System Building
Based on the Teachers Dominate the English Teaching Research
C-Language Course Teaching Website Design and Implementation
Cultural Interpretation of the Central Plains Martial Arts
Development Measures to Enhance the Humanity Accomplishments in Vocational College History Teaching
Feasibility Study Innovative "Sand Softball" Campaign Carried out in the Community
Higher School Mental Health Education to Carry out the Way to Explore
Higher Vocational College Physical Education Situation Analysis and Reform
Internet Aided Teaching System Design and Implementation
Microsoft Word Application in Sports Drawing
Modern Information Technology and English Language Study Motivation
Music Education Research at the Impact of Modern IT
On the Bottleneck of the Cultural Value of National Traditional Sports and Solutions
On the Development Situation of Volleyball Industry in College
On the Emotion Regulation in the Training of Physical Education
On Trend and Countermeasure of Subjectivity Ideological Education of College Students
Our Colleges and Universities for Sports Information Management System Software Development Model Study
Research on the Influence of Multimedia Teaching Technology of College Physical Education Teaching
Study on Improving the In-Class Teaching Ability of Young Teachers in Science and Engineering Universities and Colleges
Study on the Computer-Assisted English Writing Instruction
The Application of Multimedia Technology in College Physical Teaching
The Application of Virtual Reality in Engineering Education: A Case Study of the Virtual Storage Cavern System
The Exploration of the Adult Higher Education’s Location in the Ordinary Colleges and Universities
The Informatization Teaching Design of "Design and Applications of Combinational Logic Circuits"
The New Era College Education Reform and Development Trend of Exploration
College Football - Construction of Self-Protection Methods to Luoyang Normal University Athletic Training Students as an Example
A Study of Formative Assessment in Fostering College Students’ Motivation on English Learning
Computer Simulation of Kinetics Relationship between Gymnast and Mat
Combined with the Characteristics of Materials Engineering Students Environmental Awareness
On Sanda "Time Difference" and the Use of Training Methods
The Exploration of Guangxi Traditional Ethnic Minority Sports Meeting in View of Industrialization
Design on Monitoring and Management System of Large-Scale Instrument and Expensive Equipment Based on STC MCU
Chapter 8: Engineering Management, Production Management, Business and Economics
Alternative EPR Investment Optimizing Path & Modeling Analysis
An ERBF Network Prediction of Taiwan’s Crude Birth Rate Taking Economic Growth Rate and National Income Indices as Input Variables
Analysis Model of Nuclear EPR Substitute for Coal EPR
Design and Realization of the Credit Card Management System
Double Game Theory: Be Described by China's Accession to the WTO and the Relations between Taiwan and the United States
Effect of Gas and Electricity Price on Energy Consumption Rate for Residential Sector in Taiwan Based on Fuzzy Rules
Exploration of Business Ethics Based on Economics Analysis
Financial Management System Design of Guangxi Colleges and Universities
Forecast of Regional Fly Ash Production and Sales Based on BP Neural Network
Function Effects Post-Evaluation for Substation Construction Project Based on Multi-Level Extension Assessment Method
In the Engineering Project of Legal Risk Control
IT Impact Analysis of Human Resource Management Model
Lean Production System Design and Implementation in Product Life Cycle
Research on the Risk Programming Model Based on Nutch
Research on VB+Access Knitting Clothing Enterprise Management System Based on
Six Sigma Applications: Enhancement Sigma Level towards Quality Improvement at Automative Company
State-Owned Banks Risk Management Research
Study the Influence of the Implementation of Demand Side Management on Generation System Reliability
The Application of VaR Methods in Financial Risk Management Research
The Communication Management Research in the Process of ERP Implementation
The Comparative Study of EOQ Newsboy and Silver-Meal Method for SMEs Business
The Economic Analysis of Applying Top-Down Method on the Different Structure Types and Construction Methods
The Study of Service Quality and Customer Loyalty of C2C Platform
The System Development and Implementation of Design Drawings Management and Archive Combination
Using BPNN to Predict Number of Low-Income Households in Taiwan Based on Seasonally Adjusted Annualized Rates for Real GDP
Views of the Communication Security of Power Supply Enterprises
A New Reducing Analysis Based on SVM for Farmers Professional Cooperative Management
The Awareness of Brand Building and the Brand Building Strategic Actions of Chinese Health Food
The Fact Research of the Equipment and Facilities Integrated Management IT System for Chinese Oil Company
The Initial Research of RB Programming Model and Quantity System for Private Investor in China Future Markets
The Core Values of the Brand of Chinese Health Food
Ergonomics Layout Optimization of the Aircraft Cockpit Based on Particle Swarm Optimization
Product Design Evaluation of Home Appliances Based on Fuzzy-AHP
Fuzzy Decision Theory Applications in the Field of Oil and Gas Production and Operation
EU Approaches to Unification of Methodologies for Determination of Building Object Life Cycle Costing
Green Idea of Product Design
Using ANN to Forecast Transportation Sector’s Energy Consumption in Taiwan Based on Oil and Gas Price
Research on Portable Electronic Equipment Design Based on Scenario-FBS Model

Reihe/Serie Advanced Materials Research
Zusatzinfo Illustrations, unspecified
Verlagsort Zurich
Sprache englisch
Maße 170 x 240 mm
Gewicht 3500 g
Themenwelt Technik Elektrotechnik / Energietechnik
Technik Maschinenbau
ISBN-10 3-03835-277-2 / 3038352772
ISBN-13 978-3-03835-277-8 / 9783038352778
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
Wegweiser für Elektrofachkräfte

von Gerhard Kiefer; Herbert Schmolke; Karsten Callondann

Buch | Hardcover (2024)
VDE VERLAG
48,00