Mechanical, Electronic and Engineering Technologies (ICMEET 2014)

Preface, Committees and Sponsors
Chapter 1: Materials Science and Processing
Study on Preparation and Properties of Vitrified Beads-Polystyrene Particles Insulation Mortar
Study on Preparation and Properties of Composite Insulation Mortar
Structure and Dielectric Properties of Mg, Cr-Doped LaSrFeO3 Films
Piezoelectric Properties Study of KNN-LS Lead-Free Ceramics Synthesized by Sol-Gel Method
Friction and Wear Performances of Magnesium Alloy against Steel under Lubrication of Soybean Oil with S-Containing Additive
Experiment and Research of EDM Surface Modification of Titanium in Mist Medium
Red Mud Based Geopolymer and its Forming Mechanism
Multiple LAMMPS Script of Graphene Crystal Cell
Coloring Mechanism of Rare Earth Polishing Powder and Study of its Factors
Study on Chemical Mechanical Polishing Removal Mechanism of Monocrystalline Silicon
Brush Plating Surface Strengthen of the Cr12MoV Stamping Die
Research on Methods of Improving Fatigue Property of Low-Strength Steel Welded Joints
Diffusion and Oxidation Wear of PCBN Tool when Cutting Materials Difficult-to-Cut Based on Thermodynamics
The Silicon Plates in Buried Oxide for Enhancement of the Breakdown Voltage in SOI MESFET
Simulation Research of Deuterium and Tritium Ions Motion in Accelerating Electric Field for Neutron Tube
Adsorption of Phthalates onto Nanofiltration Membranes: Effect of Solution Chemistry
The Non-Newtonian Fluid in the Collision
Chapter 2: Research and Technologies for Engineering
Parametric Design and Modal Analysis on Oval Gear Based on CATIA
Precision Analysis and Control of the Mold Rapid Development Based on Reverse Engineering
The FEA Comparison of the Front Sub Frame in a Car between JDM2 Magnesium and Steel
Dynamics Characteristics for Contact Surface of Machine Tool
Dry Gear Hobbing Machining Experiment and Research on Process Parameters
Application of the Finite Piece Method to Simulate Viscoelastic Fluid Flows in L-Shaped Channel
The Research about Parallel Mechanism Workspace for Quenching
The Effect of Loading Path on Forming Results in Multi-Gripper Flexible Stretch Forming
Design and Simulation of High-Speed Spiral Flow in Hydraulic Lifting System
Application Research of Virtual Prototype Technology in the Variable Stiffness Suspension Matching of Light Bus
The Influence Caused by each Assembly Misalignment on the HGT Hypoid Gear's Meshing Performance
A Multi-Objective Programming Model of Dynamic Adjusting Flight Traffic
Research on the Latest Maneuver Moment of Aircraft and the Minimum Safety Distance between Aircrafts in Free Flight
Study on the Automotive Body Collision Damage and the Repair Method
On-Orbit Servicing Task Allocation for Multi-Spacecrafts Using HDPSO
Analysis of an On-Orbit Replaceable Mechanism Based on ADAMS
Research on Path Planning of Manipulator for Aerial Boom Refueling Test System
Research on the Influence Factors for Bus Based on Nonlinear Model
Convergence Theory for Unified Discrete-Time RNNs with Quasi-Symmetric Connection
Fault Prediction Method of the Marine Gas Turbine Based on Neural Network-Markov
In-Cylinder Heat Transfer Model for Diesel Engine Based on Improved Woschni Correlation
Research on Linear Motor in Deep Exploration Based on Experiment
Visual Modeling and Simulation Research of a Kind of On-Orbit Servicing Spacecraft
Design of a Compact UWB Antenna Using Two Modified U-Shaped Slots for Satellite Frequency Rejection in C-Band and X-Band
Satellite Module Layout Design Based on Adaptive Bee Evolutionary Genetic Algorithm
A Supervisor Management and Evaluation System Based on Real-Time Location System
Research of Real-Time Fault Diagnosis Platform of Aero-Engine’s Fuel Flow Sensors
Research of Stitching Scraps Automatically Based on Cluster Analysis
Design of Sweet Potato Vine Chopping and Returning Machine
Key Technologies for Health Management and Applications of Aero-Engine Based on Principal Component Analysis
Chapter 3: Electrical Engineering and Apparatus
Dynamic Simulation of a Two-Stroke Spark Ignition Free-Piston Engine Generator
Study on Generating Characteristics of Free-Piston Engine Generator
Performance Analysis of Direct-Driven Permanent Magnet Generator with Output Power of 3MW
A Novel Modulation Method for Modular Multilevel Converters
Research on Experimental Methods of Evaluating Deterioration Performance of High-Voltage Insulators
A Forecasting Method of Short-Term Electric Power Load Based on BP Neural Network
Zone Selective Protection System with Multiple Power Sources
Modeling and Solving on the Solar Photovoltaic Cells Paving Optimization on Buildings
A Novel Flyback LED Driver Based on Primary Side Feedback without Auxiliary Winding
The Study of LED Linear Dimming with Hysteresis Current Driver and Peak Current Detection Driver
Assessment of Wind Turbine’s Power Curve Based on Performance Reliability Theory
A Predictive Model of SOFC Thermal Management Based on LS-SVM
Chapter 4: Electronics and Integrated Circuits, Embedded Technology
Circuit Designs for an Automation Intelligent Electrical Distribution Terminal Unit Based on DSP
Design of an Intelligent Help System
Design of Arithmetic Operation Core in Embedded Processor for High Definition Audio Applications
Design of USB2.0 Data Exchanging System Based on FPGA
Hierarchy Design of Digital System Based on EDA Technology
Chapter 5: Construction and Geology Research
The Development of Self-Test Box for Magneto Telluric Recorder
Feasibility Study of Heat Utilization from Waste Oil Wells
Analysis of Dynamic Characteristics of Pile-Soil-Water Coupling Effect in Consideration of Large Span Cable-Stayed Bridge
Experimental Study by Using Drilling Core Materials Inversion Formation Rock Fracture Toughness Test Research
Experimental Studies of the Longitudinal Flexibility of Balloon-Expandable Coronary Stents
Effect of Material and Work Status of Vascular Stents on Flexibility Property of Stents
Chapter 6: Analysis, Testing and Monitoring
Measurement of Cutting Speed of Mechanical Excavator
The Test System of Submersible Motors Performance Based on LabVIEW
Research Status and Trend of On-Board Diagnostics
Design of Ultrasonic Ranging Alarm Device Based on SN8P2501B
The Ammonia Leak Monitoring and Warning System Based on Wireless Sensor Network in Industrial Environments
Application of Timesten on Web-Based Monitoring System
A Comparative Study of Fatigue Criteria for Engineering Application
A Survey of Collision Detection
Chapter 7: Robotics and Control Systems
The Trajectory Planning and Simulation for Industrial Robot Based on Fifth-Order B-Splines
Indoor Autonomous Navigation Technology Research Based on Lidar for Quad-Copter Aerial Robot
Optical Flow-Based Monocular Vision/INS Integrated Navigation for Mobile Robot Indoors
Iterative Learning Control for a Class of Modeling Undesirable Single Degree of Freedom System
On Stereoscopic Machine Vision with Limited Horizons
Nonlinear Control Approach of an Electromagnetic Bearing System
Feedback Linearization Control of Electric Arc Furnace System Based on dSPACE Simulation
Solar Energy Traffic Control Box Design
Study on Key Technology of High and Low Temperature Test System for Flight Control Unit
Approximate Controllability of Boundary Control Systems with Nonlinear Boundary Conditions
Design of the Three-Dimension Motion Platform Control System Based on EtherCAT
Design of Electronic Control System for Free-Piston Engine Generator
Application of Fractional-Order PIλ Controller for PMSM Speed Control
Research on Multi-Speed Control of Variable-Frequency Drive
Rotor Orientation Control Strategy of a Linear Arc-Shaped Induction Motor with Multiple Stators
Chapter 8: Informational and Communication Technology, Signal Processing and Algorithms
Self-Tuning Weighted Fusion Kalman Filter for ARMA Signals
Depth Analysis of Typical Accident with FTA Technology
Collaborative Optimization Algorithm Based on the Penalty Function
Effect of Dichotomous Noise on Dynamics of Spiral Waves
Image Measurement of Traffic Flow Parameters and its Traffic Congestion Evaluation
An Analysis of Factors Influencing Foreign Language Self-Efficacy Based on C5.0 Decision Tree Algorithm in Data Mining
A New Application of Kalman Filtering Algorithm Based on Interval Calculation in Navigation System
Optimization of Control Parameters Based on Multi-Objective Genetic Algorithms for Spacecraft Large Angle Attitude
Motion Key-Frames Extraction Based on Locally Linear Embedding
Human Motion Capture Data Segmentation Based on LLE Algorithm
Input-to-State Stability of Multi-Agent Systems
A Novel Multi-Service Passive Optical Network Based on the Wavelength-Division-Multiplexed Technology
Design of Intelligent Transportation Wireless Module Based on STM32F207
Research on the Applications and Characteristics of the Wireless Sensor Network
A Range Free Acoustic Localization Algorithm in Wireless Sensor Networks
The Study and Application of Improved Micro-Genetic Algorithm Based on Cauchy Mutation
An Improved Task Scheduling Algorithm Based on Multi-QoS in Cloud Computing
Study of Cluster-Footprint Analysis Testing Algorithm and System
Study of Intelligent Evidence Management System