Energy Engineering and Environment Engineering

Preface, Committees and Sponsors
Chapter 1: Energy, Power Engineering and Vehicles
A Comprehensive Model of a 6/10 Switched Reluctance Motor Based on Matlab Environment
An Empirical Study of Two Numerical Models for Wind Resource Simulation in Complex Terrain
Climbing Characteristic of the Wheeled Vehicle with Dual Pump Drive System
Design and Development of Wave Energy - Wind Energy Hybrid Power Generation System
Design of 1kw Al-Air Battery
Development of Electric Vehicle Remote Monitoring System's Server and Client Application
Experimental Study on Heat Transfer of Pressurized Spray Cooling on the Heated Plate by Using 45° Full Cone Nozzles
Experimental Study on Energy Saving between Heat Pump Unit of Heat Recovery Fresh Air and Heat Pipe Heat Pump Low Temperature Heat Recovery Unit in the Cold and Severe Cold Regions
Flame Propagation Speed Test of Biomass Gas
Magnetic-Field Modulation Principle and Transmission Ratio Calculation of Field-Modulated Asynchronous Magnetic Coupling
New Source of Energy Production - Solar Pond an Effective Use of Present Alternative Technologies
Novel SCR Technique for DMCC Engine Emissions Control
Numerical Analysis of Piston's Trajectory for a New Kind Engine
Numerical Simulation of Heat Transfer Enhanced Tube Inserted Delta-Wing
Numerical Study of Heat Transfer Characteristics in Narrow Channel with Staggered Dimples
Pressure Transient Analysis for Partial Open Fractured Wells in Shale Gas Reservoirs
Production of Clean Fuel Utilizing the Unsupported Sulfide Catalysts
Research and Development on Remote Calibration System for Electric Vehicles
Research on Control Strategy of PV MPPT and Grid-Connected Single Phase Converter Based on Two Stage Topology
Self-Starting Performance Numerical Analysis of Fixed-Pitch Vertical Axis Hydro-Turbine
Studies on Wastewater Treatment Using Solar Photocatalysis in Oman
Study of Energy-Saving Dyeing Process for Poly(lactic acid) Fabric
Study of Influence Effect on Heat Transfer Performance of Single-Loop Oscillating Heat Pipe
Study on Flow Measurement Model of Gas-Liquid Two-Phase at Inlet of Wellhead for the Exploitation of Natural Gas Hydrate
The Development of Remote Monitoring and Diagnostic System for Electric Vehicles
The Discharge Status and Technical Analysis of NOX of Thermal Power Plant Boiler
The Effects of Vertical Stratification and Land Use Data on Numerical Simulation of Wind Energy Resources
The Electrical Properties and Changes on the Substrates of Microbial Fuel Cells Using Excess Sludge
The Estimation of Wind Speed and Wind Power Characteristics in Taiwan
The Research on Emission Performance of Large Marine Diesel Engine Based on Performance Parameters Analysis
The Research Status of Modular Multilevel Converter and its Capacitor Voltage Balancing Control
Transformer Fault Diagnosis with the Duval Triangle and Heuristic Techniques
Wind Power Ramp Forecasting Based on Least-Square Support Vector Machine
Available Capacity Estimation of Electric Vehicle Batteries Based on Peukert Equation at Various Temperatures
Research on Energy Security and Sustainable Development of Beijing
Safety Assessment of Boiler Water Circulation
Simulate Design of Direct Air Cooling Exhausted Duct System for 1000MW Super-Critical Thermal Power Unit
Study of Power Generation System Based on Black Smokers
Electromagnetic Properties Analysis of Field-Modulated Asynchronous Magnetic Couplings
Study on Regulating Valve Settings for Small and Medium Cascade Hydropower Stations
Chapter 2: Environmental Researches and Engineering
Identification the Status and Dominant Factor of Eutrophication in the Newly Built Reservoir during the Impoundment Period
A Low-Cost Portable Biological Drug Transport Box at Low Temperature
A Review on Aerobic Granular Sludge for Heavy Mental Wastewater Treatment
A System Dynamic (SD) Model for Logistics Strategic Environmental Assessment (SEA)
A Review and Perspective on Slow and Controlled Release Fertilizer in China
Accounting and Analysis of CO2 Emission from Ceramics Industry
Advanced Treatment on Papermaking Wastewater Using Photo-Fenton Modified Fly Ash
Analysis and Practice of Cleaner Production in a Wastepaper Papermaking Enterprise
Analysis of Water Resource Carrying Capacity in the Ecological Economic Zone of Dongting Lake
Application of Game Theory in Night Construction Noise Control
Application Research on the Coupled Human-Environment Ecosystem Vulnerability Assessment in Different Spatial and Temporal Scales
Assessment of Sediment Quality in Jiangsu Coastal Ocean Based on Grey Clustering Method
Assessment on the Necessity to Purify the Newly Constructed Laohutan Reservoir
Calculation of Eco-Environmental Water Demand for River Dalinghe
Characteristics of Organochlorine Pesticides Residues and Research Progress of Migration and Transformation in Soil
Chromium Contamination in Sediments of Anping Harbor, Taiwan
Classification of Dissolved and Particulate Phosphate Components in Xiangxi River, China
Design of Choking Cavitator and its Feasibility Study in Wastewater Treatment
Development of Optimization Model for Fuel Supply in District Heating System Based on Environment and Heat Demand Joint Constraints
Discussion on the Construction Concept and Development Mode of Fan River Minor Ecological Watershed
Discussions on Several Key Problems of the Control and Planning of Total Amount of Marine Pollutant
Effectiveness of Purifying Polluted Water Quality by Caisson
Effects of Intake Port Optimization on Soot Emission from Diesel Engine
Environmental Pollution and Economic Growth
Life Cycle Assessment of Urban Wastewater Treatment
Mechanism Analysis of Coagu-Flocculation and Nuclear-Flocculation Combined Process Treat on Straw Pulp Papermaking Wastewater
Mechanism of Fishy Odor Compounds Metabolized by Algae
Meteorological Factors Affected Dew Condensation in Marsh Ecosystem
Part of the Town Sewage Treatment Plants Investigation and Analysis of Current Situation of Guizhou Province
Problems of Water Quality Management in Marine Nature Reserve of Fujian Province and the Countermeasures
Progress of the Research of Nitrogenous Disinfection By-Products Haloacetonitriles (HANs) in Drinking Water
Progress on OCPs and Chronic Disease
Research Development on Constructed Wetlands
Research on the Pattern of Comprehensive Improvement of Small Watershed Pollution in Guangxi Province
Research for Water Quality Problems of Power Plant Circulating Cooling Water Source Heat Pump System in the Cold and Severe Cold Regions
Risk Assessment of Heavy Metal Pollution by Three Plants at Zihu River in Nanjing, China
Risk Control Measures for Environmental Protection of Guangxi Coastal Waters
Study on Environmental Protection Planning of Datong Town in Daqing
Study on Iron Release with Various Blending of Desalinated Water and Tap Water
Study on Thorny Bamboo Activated Carbon for Capturing Heavy Metals in Groundwater
Study on Water Plugging Technology by Emulsified Viscous Oil in Block Jin16
The Application of Hydraulic Model in Water Environment Pollution Simulation
The Application of System Dynamics Model of City Water Demand Forecasting
The Development of Household Membrane Filters for Drinking Water Treatment
The Groundwater Seepage Numerical Simulation and Prediction for a Alluvial Fan Water Resources Site
The Laboratory Study of Drinking Water Biofilms
The Mechanism of the Earth's Epidermis Warming Caused by Exploitation of Fossil Fuels
The Removal of Typical Endocrine Disrupting Compounds in Drinking Water Process in South China
The Study on Protozoan Community Structure of Zhalong Wetland
Zinc Contamination in Sediments of Southern Kaohsiung Harbor, Taiwan
Effects of Urbanization on Black Soil: A Remote Sensing Perspective
Mapping the Spatial Variability of Soil Properties: A Comparative Study of Spatial Interpolation Methods in Northeast China
Energy and Environmental Challenges and Coping Strategies
Particles Separation of Hydrocyclone Based on CFD Simulation
Research of Optimization Framework for China's Low-Carbon Technology Development Based on 3E Model: A Case Study of Electricity Industry
The Design and Development of Bamboo-Baking Ovens Appropriate for Handicraft
Application and Processing Analysis of MBR Technology
The Life Cycle Assessment of a Polypropylene Product, Part A: Raw Materials, Manufacturing and Disposal Scenario
The Life Cycle Assessment of a Polypropylene Product, Part B: Comparison of Fuel Options for Generating Electricity and Disposal Methods
A Study on Release of Nutrients from Ash Fertilizer
Study on Adjustable Head Fall Mixer with Grids
Analysis on the Energy Consumption (EC) and Carbon Emission (CE) of Tourism Transport of Jiangxi Province Using the PLS Method
Chapter 3: Agricultural and Urban Ecological Environment
Effect of Aeration Conditions on the Flow Field in the Submerged Membrane Bioreactor
Establishment of Catchment Coefficient Using Wall Surface in Slenderness Ratio-Specific Miniature Models Created for Experiments
An Innovative Sustainability-Oriented Eco-Development Approach in China: The Case Study of Chongming Island
Availability Analysis of Mercator Projection in Nautical Charts' Compilation in Polar Regions
Effect of Application Uniconazole on the Growth and Physiological Activity of Wheat Seedling
Effect of Growing Medium on the Physiological Characteristics of Organic Rice Seedling
Comparision of Treatment Performance for Fruit and Vegetable Waste (FVW) by Single-Phase and Two-Phase Anaerobic Digestion
Effect of Salinity on the Growth and Biochemical Composition of Sargassum thunbergii and Gracilaria verrucosa
Simulation Analysis of an Ambulance Carriage Interior Noise
Study on Application of Urban Underground Drain Pipeline Information Modeling as an Auxiliary Decision Support in Urban Planning
Chapter 4: Mining and Processing of Mineral Resource
A Modified Model for Friction Reduction by Vibrating Drill-String Longitudinally
Application Prospects in China of Oil Shale In Situ Mining Method and an Improved Method
Based on RBF Neural Network Modeling of Well Test System
Research on Dynamic Mechanism of Green Coal Mine Construction
Research on Gas Content Prediction Model of Hebi No.6 Mine Based on Quantification Theory
Study on Coalbed Methane well Type Optimization of Badaowan Formation in Junggar Basin
The Analysis of the Coal Floor Water Inrush Effected by the Fault
The Influence of Micro-Character on Macroscopic Properties in Low Permeability Reservoir
Chapter 5: Materials Science and Materials Processing
Adsorption of Cr(VI) from Aqueous Solutions Using Nano β-FeOOH and β-FeOOH/-Surfactant-Modified Zeolites
Application of Sulphatoethylsulphone Reactive-Disperse Dye on PLA and Cotton Fabrics
Controlled Synthesis of Titanium Dioxide Nanocomposites with Different Structures and Morphologies
Development of Adsorbent Material from Tamarind-Seed Testa for Reactive Dye Adsorption
Effect of Additives on the Synthesis of Foam Glasses from Polishing Porcelain Tile Waste and Carbon Ash
Effect of Chitosan and Turmeric Dye on Ultraviolet Protection Properties of Polyester Fabric
Influence of Monochlorotriazine-β-Cyclodextrin Treatment on Dyeing and Fastness Properties of the Hot-Dyeing Reactive Dye on Cotton
The Capacities Evaluation of Oil Absorption Materials
The Effective Removal of Congo Red Dye from Aqueous Solution Using Fly Ash/CeO2 Composite Material
The Relationship between Critical Flux and Membrane Fouling
Contactless Electroreflectance Spectroscopy of ZnO with Different Polarization-Direction Probe Beams
Development of Catalyst for Industrial Flue Gas Denitration at Low Temperature
Electrical Characteristics of ZnTe Thermoelectric Thin Films
Experimental Study on Softening Treatment of Weak Acid Hydrogen Type Resin to Viscous Oil Sewage
Optimization of Surfactant and Polymer for SP Flooding of Zahra Oil
Reasonable Injection Parameters for the Polymer Flooding Research in the Putaohua I1~2 Oil Layer of Xing IV Area
A Ce-Zr-Ti Oxide Catalyst for Selective Catalytic Reduction of NO with Ammonia
Chlorination Degradation of Estriol under Various pH Values in Aqueous Solution
Effect of Dynamic Gelation of Polymer Gel in Porous Media: Permeability
Effects of Different Organic Carbon Sources on Properties of LiFePO4/C Synthesized by Spray-Drying
Experimental Study on the Influence of other Factors on Compression Resistance Performance of Emulsion Explosives in Deep Water
Fractionated Pyrolysis of Biomass and its Components
Influence of Compound Sensitizers on Compression Resistance of Deep Water of Emulsion Explosives
Influence of Organic Matters on Forward Osmosis Membrane Performance
Optimized Vatting Condition Study for Natural Indigo Dyeing on Silk Yarn
Photochemical Synthesis of Pd Core @ Pt Shell Nanoparticles in Polyethylene Glycol (PEG) Solution System
Removal of Cu, Ni, Zn, Cd and Pb in Artificial Acid Mine Drainage by Modified Oxygen Releasing Compounds
Research on the Dynamic Characteristics of Clay
Scouring Cotton Fabric by Water-Extracted Substance from Soap Nut Fruits and Licorice
The Biobleaching Effects of Xylanase from Streptomyces griseorubens LH-3 on Bagasse Pulp
The Influence of Total Hardness on Chlorine Decay in Water Distribution Systems
Influence of Carbon Nano-Fiber on Mechanical Property of PALC
Development of Broadband Ultra Micro-Perforated Panels Based on MEMS Technology
Modeling and Weight Analysis of Urea-SCR System
Preparation and Characterization of the TiO2 Coated Silk Fibroin Filters
The Research and Application of Injection Wells Acidification with Temporary Plugging Agent