Applied Stress Analysis

Fatigue and Fracture Mechanics.- Predicting Fatigue Failures in Thick-Walled Cylinders under Pulsating Internal Pressure.- Dynamic Stress Analysis of a Cracked Rolling Mill Housing.- Three-Dimensional Measurement of Opening Displacement of Rapidly Propagating Cracks in PMMA.- Kinked Cracks: Finding Stress Intensity Factors.- Strain Behavior Near Fatigue Crack Tip in Polymers and Their Life Evaluation.- Residual Stress.- Review of Some Development of the Hole Drilling Method.- The Use of Barkhausen Noise to Investigate Residual Stresses in Machined Components.- Residual Stress Patterns in Cold Drawn Steel Wires and Their Effect on Fretting-Corrosion-Fatigue Behaviour in Seawater.- Residual Stresses and Warping in Unsymmetric Laminates with Arbitrary Lay-up Angles.- Average Stress in Electrodeposits by the Bending Strip Method.- Biomechanics.- The Application of Photoelastic Techniques in Orthopaedic Engineering.- Interaction of Femur-Hip Joint Endoprosthesis with Articulated Stem.- Stress Concentration Factors for Intersecting Arrays of Notches in Beams under Pure Bending.- Three-Dimensional Strain Rosettes for an Analysis of the Geomedic Knee Prosthesis and Underlying Cement Fixation.- Finite Element and Boundary Integral Methods.- Finite Element Analysis of SPATE Benchmarks.- Finite Element Simulation of Tyre Dynamics.- Determination of Boundary Values in the Inner Surface of a Cylinder by Using Boundary Element Method.- Creep.- Model-Based Constitutive Relationships for Design and Life Extension of High Temperature Plant.- Analysis of Creep Tests on Springs.- Creep Damage and Creep Rupture of Metals.- Finite Element Prediction of Creep Crack Growth from a Semicircular Surface Crack in Lead Alloy.- The Use of the Reference Stress Concept in Creep Crack Growth Studies.-Yielding.- The Experimental Analysis of Yield Stress at the Bottoms of Notch Roots.- The Severity Near the Notch Root of Notched Bars.- The Prediction of Collapse Loads Using Finite Differences.- A Graphical Approach to Shakedown in Rolling Contact.- The Use of Shakedown Concepts in the Development of Design Rules for Shell Structures Subjected to Severe Cyclic Thermal Loading.- Design Studies.- Articulating Pin Fixed Joints.- An Axi-asymmetrical Analysis of Circular Flange Connections Subjected to External Bending Moments.- Behaviour of Open Section Steel Members Subject to Combined Bending and Torsion.- Experimental Determination of Strain Concentration Factors in RHS Truss Gap K-Connections.- Dynamic Stress Analysis.- Dynamic Behaviour of Solids Clarified by High Speed Photoelasticity.- Dynamic Stress Analysis of a Three-Dimensional Solid Body.- Shock Waves in Plates under Elastic and Viscoelastic Conditions—Optical Measurement by Combining Photoelasticity and Moiré.- Experimental, Analytical and Computational Stress Analysis Used in Developing a Multi-Purpose Semi-Submersible.- Shells and Pressure Vessels.- Recent Shell Buckling Research at Liverpool.- Stresses in Damaged Circular Cylindrical Shells.- An Improved Analysis for Cylindrical Vessels Supported on Rigid Saddles.- Stresses and Deflections Due to External Loads on the Nozzle Branches of Cylindrical Pressure Vessels.- Optimum Design of Composite-Reinforced Pressure Vessels.- Adhesive Joints.- A Two-Dimensional Stress Analysis of Adhesive Butt Joints Subjected to Tensile Loads.- A Stress Analysis of a Band-Adhesive Butt Joint Subjected to a Torsional Load.- Strength Evaluation of Scarf and Stepped Lap Joints Bonded with Adhesive Resin.- A New Concept in Mechanical Evaluation of Adhesive Test Specimens:Stiff versus Flexible Adherends.- Behaviour of Brick, Masonry and Concrete Structures.- The Application of the Finite Element Method to the Study of Cracking in Masonry Arch Bridges.- Stress Analysis in Masonry Walls by Ultrasonic Measurements.- Experimental Results on Moment Redistribution in Reinforced Concrete Continuous Beams.- A Preliminary Investigation of Reinforcement Ductility in Reinforced Concrete Slabs.- Automatic Photoelastic Fringe Reading.- A New Computer-Aided System for Photoelastic Stress Analysis with Structure-Driven Type Image Processing.- Whole-Field Measurement of Principal Stress Directions from Photoelastic Experiment Using Image Processing System.- The Benefits and Pitfalls of Automatic Processing for Photoelastic Test Data.- Photoelasticity and Photoviscoelasticity.- 3-D Photoelasticity and TV-Holography for the Analysis of Rotating Components.- Least Squares Methods for Photoelasticity.- Photoelastic Analysis of Dovetail Joints for Turbine Blades.- Inaccuracies of Photoelastic Measurements.- Fundamentals of Photoviscoelastic Technique for Analysis of Time and Temperature Dependent Stress and Strain.- Assessments of Techniques.- Strain Measurements by Strain Gages Made of Nickel Foil.- Application of Caustic Method to Stress Analysis in Plates with Discontinuously Distributing Load.- Optical and Mechanical Interaction of Structurally Integrated Optical Fiber Sensors.- Accuracy and Precision in the Thermoelastic Stress Analysis Technique.- Hybrid Technique to Analyze 3-D Stress-Strain States.- Moiré Interferometry.- Deformations and Strains Surrounding Weldments Using Moiré Interferometry.- Strain and Shape Measurements by Scanning Moiré Method and Fourier Transform Moiré Method.- The Measurement of Plastic-Elastic Strains at Weld ToesUsing Moiré Interferometry.- An Optical Technique to Measure Micro Displacements.- Optical Analysis of Ductile Fracture of Metals.- Late Submission.- Sharp V-Notches Subjected to Axial and Shear Stresses.- Index of Contributors.