Problems of Emergency Situations: Materials and Technologies II

Preface
Chapter 1: Properties and Processing Technologies of Structural Metals
Low Cycle Fatigue of Structural Alloys
Planning an Experiment for Low-Cycle Fatigue under Conditions Deep Cooling
Repeatability of Sheet Material Formation Results and Interchangeability of Processing Modes at Multi-Pass Laser Formation
Stress-Strain State and Structural-Phase Transformations of Metal Articles Obtained by Laser Shaping
Investigation of the Properties of Powder Materials Using Computer Modeling
Analysis of the Effect of Mechanical Oscillations Generated during Welding on the Structure of Ductile Constituent of Products Made of Steel 10G2FB
Chapter 2: Coatings and Surface Treatment
Electrochemical Synthesis of Crystalline Niobium Oxide
Research of the Influence of Silicate Fillers on Water Absorption and Microstructure of Styrene-Acrylic Dispersion Coatings
Alternative Strengthening of Jewelry Tools Using Chemical-Thermal and Local Surface Treatments
Electrochemical Formation of Oxide Films on the Titanium Alloy of Ti6Al4V in Ethylene Glycol-Water Electrolytes to Produce Bioinert Coatings and Increase the Corrosion Resistance of Medical Implants
Research of the Microstructure of the Deposited Layer during Electric Arc Surfacing with Control Impacts
Application of Thermo-Frictional and Chemical-Thermal Methods Treatments for Surface Strengthening of Materials
Investigation of the Heat-Affected Zone Properties During Cladding of Power Equipment with Austenitic Materials Using Control Mechanical Impacts on the Strip Electrode
Studying the Effect of Fuel Elements Structural Materials Corrosion on their Operating Life
Chapter 3: Polymers and Composites
Research of Safe Technology of Impregnation of Heated Reinforcing Materials with Binder
Use of Silicone Materials in Modern Structures of Highly Functional Technical Means of Rehabilitation
The Thermal Destruction and Coke Formation Intensity Influence on the Delamination and Destruction of Fiber Reinforced Plastics with a Unidirectional Filler under High Temperature Conditions
The Deformable and Strength Characteristics of Nanocomposites Improving
Experimental Substantiation of Antimicrobial Efficiency of a New Composite Polymeric Material Based on Poly(2-Hydroxyethyl Methacrylate) under the Action of Low-Intensity Current without External Power Supplies
An Experimental Study on Elastic and Strength Properties of Addictively-Manufactured Plastic Materials
Sorption Resistance Studying of Environmentally Friendly Polymeric Materials in Different Liquid Mediums
Chapter 4: Functional Materials and Chemical Technologies
Thermodynamics of Solid-Phase Exchange Reactions Limiting the Subsolidus Structure of the System MgO-Al2O3-FeO-TiO2
Thiocarbamide-Citrate Electrolytes as an Alternative to Cyanide Electrolytes in Solving the Problems of Environmental Protection and Prevention of Emergency Situations
Influence of Basic Oxides Ratio Li2O/Al2O3, SiO2/Al2O3 and H2O/Al2O3 on Physical, Rheological and Colloidal-Chemical Properties of Lithium Containing Alumosilicate Suspensions in the System xLi2O-Al2O3-nSiO2-mH2O
Metal Hydride Technologies for Separation of Hydrogen Isotopes
Influence of ANO3 and ANO3·nH2O Nitrates on the Deformation Properties of Aluminosilicate Adhesives for Wood Products and Structures
Research of Operational Properties of Household Fabrics for Production of Protective Masks
Chapter 5: Materials and Technologies for Environmental Engineering
Colloid-Chemical Regularities of Reagent Wastewater Treatment of Dairies
Use of PET Granules for Improving a Surface Runoff Treatment
Co-Mo-W Galvanochemical Alloy Application as Cathode Material in the Industrial Wastewater Treatment Processes
Treatment of Real Wastewater from Organic Contaminants by Using Biochar
Synthesis of ActivaTED Carbon from Plant Raw Materials by a Self-Activation Modified Method
Ecological Aspects of Clay Sorption Materials Usage in Leather and Fur Production Technologies
Utilization of Galvanic Enterprises Sewage
Ash-Slag Waste of the Coal-Fired Thermal Power Plant as a Resource for the Construction Industry
Technology Placement of Drilling Waste Storage with the Use of Soil Cement Screens
Research of Technical and Economic Properties of Material of Porous Fuel Briquettes from the Solid Combustible Waste Impregnated with Liquid Combustible Waste
Chapter 6: Building Materials
Fine-Grained Concrete for Repair and Restoration of Building Structures
Experimental Studies of Fiber-Reinforced Concrete under Axial Tension
Experiment Planning for Prospective Use of Barium-Containing Alumina Cement for Refractory Concrete Making
Influence of Temperature Fields on the Quality of Dried Wood Products
Investigation of the Limit of Fire Resistance of a Steel Beam at Loss of Integrity of a Fire-Resistant Lining
Development of a Bitumen-Polymer Composition, Resistant to Atmospheric Influences, Based on Petroleum Bitumen and their Properties Study
Chapter 7: Materials and Technologies for Preventing of Technogenic Emergencies
Research of the Chlorine Sorption Processes when its Deposition by Water Aerosol
Experimental Study of the Insulating Properties of a Lightweight Material Based on Fast-Hardening Highly Resistant Foams in Relation to Vapors of Toxic Organic Fluids
Influence of Cracks on the Safe Functioning of Building Structures
Solution of the Problem of Operational Reliability and Environmental Safety of Transport Pipeline Systems
Hydrogen Sulphide in Industrial Enterprises Water Management Infrastructure - The Factor of Chemical and Microbiological Corrosion Concrete Degradation of Water Facilities
Investigation of the Influence of the Physical Properties of Landfill Soils on the Stability of Slopes in the Context of Solving Civil Security Problems
Detection of Dangerous Defects and Damages of Steel Building Structures by Active Thermography
Applying Ultrasound Detection Devices to Examine Pгореrties of Concrete Structures
Numerical Evaluation of Safety Wall Bending Strength during Hydrogen Explosion
Chapter 8: Materials and Technologies of Fire Protection
Regarding the Formation of Wood Material Fire Protection and the Mechanism of its Action
Research of Pyrophoric Compounds in Order to Reduce their Hazard
Investigation of Gas Formation Processes in Cotton Fabrics Impregnated with Binary Compositions of Ethyl Silicate - Flame Retardant System
The Use of Sol-Gel Method for Obtaining Fire-Resistant Elastic Coatings on Cotton Fabrics
Investigation of the Processes of Formation of a Fire Retardant Coating
Thermodynamic Study of Fire-Protective Material
Features of Evaluation of Fire Resistance of Reinforced Concrete Ribbed Slab under Combined Effect "Explosion-Fire"
Enhancing the Fire Resistance of Concrete Structures by Applying Fire-Retardant Temperature-Resistant Metal Coatings
Research of Fire Resistance of Elements of Steel Frames of Industrial Buildings
Modeling of Non-Stationary Heating of Steel Plates with Fire-Protective Coatings in Ansys under the Conditions of Hydrocarbon Fire Temperature Mode
Determination of the Fire-Retardant Efficiency of Magnesite Thermal Insulating Materials to Protect Metal Structures from Fire
Research of Mechanism of Fire Protection with Wood Lacquer
Investigation of the Effect of Fillers on the Properties of the Expanded Coke Layer of Epoxyamine Compositions