In basic research, Organometallics have contributed inter alia to metal cluster chemistry, surface chemistry, the stablilization of highly reactive species by metal coordination, chiral synthesis, the formulation of multiple bonds between carbon and the other elements and between the elements themselves. This book is an essential reference work for the academic and industrial chemist and will provide up-to-date material at the cutting edge of chemistry research.
*
* Metal organic compounds of calcium, strontium, and barium in chemical vapour deposition.
* 17- and 19-electron organometallic complexes.
* Halocarbonyl complexes of molybdenum and tungsten.
* Substituent effects in metallacene chemistry.
This widely acclaimed serial contains authoritative reviews that address all aspects of organometallic chemistry, a field which has expanded enormously since the publication of Volume 1 in 1964. Almost all branches of chemistry and material science now interface with organometallic chemistry - the study of compounds containing carbon-metal bonds. Organometallic compounds range from species which are so reactive that they only have a transient existence at ambient temperatures to species which are thermally very stable. Organometallics are used extensively in the synthesis of useful compounds on both large and small scales. Industrial processes involving plastics, polymers, electronic materials, and pharmaceuticals all depend on advancesments in organometallic chemistry. In basic research, Organometallics have contributed inter alia to metal cluster chemistry, surface chemistry, the stablilization of highly reactive species by metal coordination, chiral synthesis, the formulation of multiple bonds between carbon and the other elements and between the elements themselves. Advances in Organometallic Chemistry is an essential reference work for the academic and industrial chemist and will provide up-to-date material at the cutting edge of chemistry research. Metal organic compounds of calcium, strontium, and barium in chemical vapour deposition 17- and 19-electron organometallic complexes Halocarbonyl complexes of molybdenum and tungsten Substituent effects in metallacene chemistry
Front Cover 1
Advances in Organometallic Chemistry, Volume 40 4
Copyright Page 5
Contents 6
Cotributors 8
Chapter 1. Silylhydrazines: Lithium Derivatives, Isomerism, and Rings 10
I. Introduction 10
II. Preparation 11
References 50
Chapter 2. The Organometallic Chemistry of Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 54
I. Introduction and Scope of the Review 55
II. Six- and Seven-Coordinate Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 56
III. Alkylidene and Alkylidyne Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 84
IV. Alkyne and Alkene Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 86
V. p-Allyl Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 100
VI. Diene Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 107
VII. Cp and Related .5-Ligand Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 110
VIII. Arene Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 112
IX. .7-Cycloheptatrienyl Halocarbonyl Complexes of Molybdenum(II) and Tungsten(II) 113
References 114
Chapter 3. Substituent Effects as Probes of Structure and Bonding in Mononuclear Metallocenes 126
I. Introduction and Scope of Review 126
II. Substituent Effects on Metallocene Synthesis and Stability 129
III. Physical and Chemical Properties Affected by Ligand Substitution 136
IV. Effects of Substituents on Bonding and Structure 141
V. Electrochemical Behavior of Substituted Metallocenes 158
VI. Magnetic Properties of Substituted Metallocenes 163
VII. Substituent Effects on Mössbauer Spectra 166
VIII. Conclusions and Future Directions 171
References 172
Chapter 4. Reactions of 17- and 19-Electron Organometallic Complexes 180
I. Introduction 180
II. Synthesis and Characterization 181
III. Ligand Substitution and Atom Abstraction Reactions 192
IV. Migratory Insertion and Isomerization Reactions 212
V. Redox Switches 216
References 219
Chapter 5. A Review of Group 2 (Ca, Sr, Ba) Metal-Organic Compounds as Precursors for Chemical Vapor Deposition 224
I. Introduction 224
II. Ligand Design for Group 2 Compounds as Precursors for CVD 227
III. Synthesis and Characterization of Group 2 Compounds 232
IV. Chemical Vapor Deposition of Films Containing Group 2 Elements 318
V. Summary, Conclusions, and Future Directions 336
References 338
Index 350
Cumulative List of Contributors 1–36 360
Cumulative Index for Volume 37–40 364
Silylhydrazines: Lithium Derivatives Isomerism and Rings
Katrin Bode; Uwe Klingebiel Institute of Inorganic Chemistry, University of Goettingen, D-37077 Goettinqen Germany
I INTRODUCTION
The versatility of nitrogen in its compounds depends in large measure on the existence of a range of oxidation states between -3 and + 5. In its combination with silicon, systems are known in which N has an oxidation state of -3 as in the derivatives of silylamines, of -2 as in the derivatives of silylhydrazines, and of -1 as in the derivatives of silylazenes:
Whereas in these compounds silicon is always tetrahedral, nitrogen has a changing coordination geometry: in silylamines it is planar, but in silylazenes it is linear.
This article reviews silylhydrazines, their preparation, properties, and reactions. Other reviews on Si–N compounds have appeared elsewhere. 1-8 However, as the chemistry of silylhydrazines has developed very fast, especially during the past 5 years, it seems appropriate to write an article that deals only with silylhydrazines.
II PREPARATION
A Synthesis and Properties of Silylhydrazines
The synthesis of the first cyclic and acyclic silylhydrazines were reported by Aylett9 and Wannagat et al.10, 11 in 1956–1958. Two main methods of preparation were developed.
1. The first is the treatment of a hydrazine with a halosilane. The silylhydrazines are formed by intermolecular cleavage of a hydrogen halid [Eq. (1)].
(1)
This is the most common method for chloro-, bromo-, or iodosilanes.6 Often, auxilary bases such as triethylamine or pyridine are added. But when hydrazine is treated with fluorosilanes or silanes, no condensation is observed because of the reduced reactivity. Fluorosilanes only form adducts with hydrazines, so that the reaction is stopped at step (a). Because of the extremely strong Si—F bond energy, no cleavage of HF or N2H4-condensation is observed.3, 6 In this case another preparation method must be chosen.
2. The second method of preparation is the treatment of lithiated hydrazine with halosilanes, especially fluorosilanes, with elimination of lithium halide [Eq. (2)]:
3Si—Hal+LiHN—NH2→R3Si—NH—NH2+LiHal
(2)
The formation of the silylhydrazines depends on the reactivity and the bulkiness of the halosilanes. The condensation increases with increasing number of the hydrogen atoms. While iodosilane or bromo(methyl)-silane yield the tetrakis(silyl)hydrazines,9, 12
the reaction of hydrazine with chlorodimethylsilane gives only the tris(silyl)hydrazine12:
When three methyl groups are bound to the silicon, isomeric bis(trimethylsilyl)hydrazines are formed.7, 10 Wannagat et al. succeeded in separating the isomeric N,N- and N,N′-bis(trimethylsilyl)hydrazines11:
A monosilylhydrazine can only be obtained when bulky substituents such as triphenylsilyl groups stabilize the hdyrazine10:
B Mono(silyl)hydrazines
1 Synthesis and Properties
The only mono(silyl)hydrazine known until 1993 was the triphenylsilylhydrazine 1, described by Wannagat and Liehr in 195810 [Eq. (3)].
(3)
Primary silylhydrazines with R = Me, Et, or Pr cannot be isolated, as they immediately undergo further condensation to bis(silyl)hydrazines with elimination of hydrazine.6, 10 For the triphenylsilylhydrazine this condensation only occurs under more drastic conditions at 90 °C [Eq. (4)].
(4)
Some other mono(silyl)hydrazines have been synthesized in the reaction of fluorosilanes with lithiated hydrazine:
(5)
This class of compounds is kinetically stabilized by bulky tert -butyl groups (3–6) or amine groups (7,8). In 3, 7, and 8, HF elimination should be possible, but it is hindered by the very strong SiF bond energy. These mono(silyl)hydrazines are very stable molecules and show no tendency to undergo condensation at room temperature.
Their stability allows a directed synthesis of asymmetrical bis(silyl)hy-drazines by the reactions of lithiated mono(silyl)hydrazines with halosilanes (Section B,2). These reactions often lead to the formation of isomeric products.
2 Lithium Derivatives of Mono(silyl)hydrazines
Isomeric products are formed in the reaction of lithiated di-tert-butyl-methylsilylhydrazine with fluorosilanes. The formation of these isomers requires prior coordination of the Li+ ion with the two N atoms of the hydrazine unit. The crystal structure of the lithiated di-tert-butylmethyl-silylhydrazine 4 (9)14 exhibits two different silylhydrazide units I and II, which are bound by six Li+ ions to form a hexameric entity.
The Li+ ions are bound to three different structural units: Lil is coordinated with one N atom and two NH groups; Li2 with one N atom, one N2, and one NH unit; and Li3 with one NH, one N2, and one NH2 unit. Thus, four Li+ ions are bound side-on. (See Fig. 1 and Table I.)
TABLE I
Selected Bond Lengths [pm] and Angles [°] of 9
Lil—NI | 199.5 | N2–Li2–N1 | 42.5 |
Lil—N3 | 201.6 | N2–N1–Li2 | 63.5 |
Lil—N6 | 201.8 | N1–N2–Li2 | 72.2 |
Li2—N2 | 200.8 | N4–N3–Si2 | 115.4 |
Li2—N6 | 203.6 | N4–N3–Li1 | 108.4 |
Li2—N1 | 210.4 | Si2–N3–Lil | 112.7 |
N1—N2 | 149.3 | N5–N6–Li3 | 68.6 |
Si1—N1 | 174.4 | N6–N5–Li3 | 68.5 |
Si2—N3 | 173.0 |
N3—N4 | 149.3 |
N5—N6 | 147.7 |
Si3—N5 | 174.4 |
Unlike unit II, in the solid state I does not coordinate Li+ ions side-on. The side-on bond lengths for the atoms Li2 and Li3 were determined to be 192 and 188 pm, respectively. The angles at N5 and N6, which bind Li3 side-on, are nearly identical; the angles at N1 and N2, which coordinate Li2, deviate by 7°. Thus, Li3 is positioned centrosymmetrically above the N—N bond.
Table II shows a comparison of the data for ab initio calculations of the lithium hydrazide system (NHNH2)Li+ (A)18, 19 with that for the side-on units Nl–N2–Li2 and N5–N6–Li3 (B) in 9, derived from the X-ray structure determination:
TABLE II
Calculated and Measured Parameters in A and B, Respectively
N—N | 145 | 149.3; 147.7 |
N1—Li | 161 | 200.8; 202.3 |
N2—Li | 189 | 210.4; 202.4 |
Bond angles (deg) | A | B |
N–Li–N | 56 | 42.5; 42.8 |
Li–N1–N2 | 49 | 72.2; 68.6 |
Li–N2–N1 | 76 | 63.5; 68.5 |
The structural analysis confirms the ab initio calculations, according to which Li+ ions in hydrazines can be coordinated equally by both N atoms of the hydrazine. This phenomenon also accounts for the isomerizations during the secondary substitutions.
C Bis(silyl)hydrazines
1 Symmetrical Bis(silyl)hydrazines
When mono(silyl)hydrazines are not stable at room temperature, they condensate to give the symmetrical bis(silyl)hydrazines 10–15:
(6)
These condensation reactions often lead to the formation of isomers. Structural isomerism of bis(silyl)hydrazines was first observed in 1964.19-24 In the absence of strong steric or electronic constraints, the bis(silyl)hy-drazines such as bis(trimethylsilyl)hydrazine give in a thermoneutral reaction essentially equal amounts of the N,N- and...
Erscheint lt. Verlag | 6.12.1996 |
---|---|
Mitarbeit |
Herausgeber (Serie): Anthony F. Hill, Robert C. West |
Sprache | englisch |
Themenwelt | Sachbuch/Ratgeber |
Naturwissenschaften ► Chemie ► Anorganische Chemie | |
Naturwissenschaften ► Chemie ► Organische Chemie | |
Technik ► Maschinenbau | |
ISBN-10 | 0-08-058041-6 / 0080580416 |
ISBN-13 | 978-0-08-058041-8 / 9780080580418 |
Haben Sie eine Frage zum Produkt? |
![EPUB](/img/icon_epub_big.jpg)
Größe: 18,6 MB
Kopierschutz: Adobe-DRM
Adobe-DRM ist ein Kopierschutz, der das eBook vor Mißbrauch schützen soll. Dabei wird das eBook bereits beim Download auf Ihre persönliche Adobe-ID autorisiert. Lesen können Sie das eBook dann nur auf den Geräten, welche ebenfalls auf Ihre Adobe-ID registriert sind.
Details zum Adobe-DRM
Dateiformat: EPUB (Electronic Publication)
EPUB ist ein offener Standard für eBooks und eignet sich besonders zur Darstellung von Belletristik und Sachbüchern. Der Fließtext wird dynamisch an die Display- und Schriftgröße angepasst. Auch für mobile Lesegeräte ist EPUB daher gut geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen eine
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen eine
Geräteliste und zusätzliche Hinweise
Zusätzliches Feature: Online Lesen
Dieses eBook können Sie zusätzlich zum Download auch online im Webbrowser lesen.
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
![PDF](/img/icon_pdf_big.jpg)
Kopierschutz: Adobe-DRM
Adobe-DRM ist ein Kopierschutz, der das eBook vor Mißbrauch schützen soll. Dabei wird das eBook bereits beim Download auf Ihre persönliche Adobe-ID autorisiert. Lesen können Sie das eBook dann nur auf den Geräten, welche ebenfalls auf Ihre Adobe-ID registriert sind.
Details zum Adobe-DRM
Dateiformat: PDF (Portable Document Format)
Mit einem festen Seitenlayout eignet sich die PDF besonders für Fachbücher mit Spalten, Tabellen und Abbildungen. Eine PDF kann auf fast allen Geräten angezeigt werden, ist aber für kleine Displays (Smartphone, eReader) nur eingeschränkt geeignet.
Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen eine
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen eine
Geräteliste und zusätzliche Hinweise
Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.
aus dem Bereich