Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics
Springer International Publishing (Verlag)
978-3-030-21893-5 (ISBN)
This is the proceedings of the 2nd International Conference on Theoretical, Applied and Experimental Mechanics that was held in Corfu, Greece, June 23-26, 2019.
It presents papers focusing on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.
The papers update the latest research in their field, carried out since the last conference in 2018.
This book is suitable for engineers, students and researchers who want to obtain an up-to-date view of the recent advances in the area of mechanics.
Dr. Emmanuel E. Gdoutos is Full Member of the Academy of Athens, the most prestigious academic institute in Greece, Professor Emeritus of the Democritus University of Thrace, Greece, Adjunct Professor at Northwestern University, USA, and Distinguished Clark Millikan Visiting Professor at California Institute of Technology, USA.
Materials: Properties, Manufacturing, Modelling.- Role of Compactness on Hardness and Reduced Modulus of Vaterite Determined with Nanoindentation, by Radek Sevcík and Vladimír Hrbek.- Approximate mode shape for damped structures, by Wasiu A. Oke, Oluseyi A. Adeyemi, Kazeem A. Bello, Adewale Adegbenjo.- Deformation Behavior of Ferrite/austenite Duplex Stainless Steel in Hot Compression Processing, by Hezong Li, Suxia Huang, Qiusheng Li, Xiaopin An, Facai Ren and Simon S. Wang.- Material strength degradation experiment and statistical expression under cyclic loading, by Liyang Xie, Hongyi Ma and Guoliang Xu.- Study of Effect of Phase Separation on Pores Orientation of Electrospun Nanofibre, by S. O. Alayande, E. O. Dare , J.N. Edokpayi, Adeyemi, O.A., Adewale Adegbenjo ,T.A.M. Msagati.- Deformation Model of [ 45]s Cross-Ply Fiber Reinforced Plastics Under Tension, by V.N.Paimushin, R.A.Kayumov, D.V.Tarlakovskii and S.A.Kholmogorov.- Segregation resistance, stiffness and toughness of CNTnanomodified self compacted concrete, by Myrsini Maglogianni, Panagiotis Danoglidis, Maria Falara and Maria S. Konsta-Gdoutos.- High Temperature Creep Properties of Cast Cobalt-Based Superalloys: A Comparison, by Marie Kvapilova, Vaclav Sklenicka, Petr Kral, and Jiri Dvorak.- Sub-grain plastic strain localization in CoCrNi medium entropy alloy at cryogenic temperatures, by Wael Abuzaid and Luca Patriarca.- Effects of Treatment on Microstructure and Deformation Behavior of Dissimilar Welded Joint Between Single Crystal and Polycrystalline Superalloy, by Yang Liu, Lei Wang, Xiu Song, Taosha Liang and Guo Hua.- Improved post-crack energy absorption capability of cementitious composites reinforced with CNTs and PPs, by Panagiotis A. Danoglidis, Maria S. Konsta-Gdoutos and Emmanuel E. Gdoutos.- Molecular Dynamics Investigation of Dislocation Slip in Pure Metals and Alloys, by Alexander E. Mayer and Vasiliy S. Krasnikov.- Development and validation of 3D DIC based residual stress testing method, by Tomasz Brynk.- Monogenic Filtering based Automatic Defect Detection from A Single Fringe Pattern, by Rishikesh Kulkarni and Pramod Rastogi.- Enhanced post-crack load carrying capacity of nano and micro scale carbon fiber reinforced mortars, by Maria G. Falara, Maria S. Konsta-Gdoutos and Emmanuel E. Gdoutos.- Two-point Bending Stress Determination of Ultra-thin Glass Plates, by Po-Chi Sung, Wei-Chung Wang, and Yu-Wei Kuo.- Investigation of Grating Collimation of Coherent Gradient Sensing Technique, by Po-Yu Chen, Wei-Chung Wang.- The Mechanism of Grain Boundary in Hydrogen Embrittlement of Inconel 690 Alloy, by Lei Wang, Yang Liu, Cheng He and Xiu Song.- Determining Object Motion by Digital Image Correlation Method with Camera-Array Composed Cameras of Normal Frame Rate, by Chi-Hung Hwang, Tzu-Yu Kuo, Wei-Chung Wang.- Fracture.- Configurational stability of a crack propagating in mixed-mode I+II+III, by Jean-Baptiste Leblond, Alain Karma, Laurent Ponson and Aditya Vasudevan.- Limiting equilibrium of interfacial shear cracks at the corner point of the media-separating boundary of the piece-homogeneous isotropic plane, by V.M. Nazarenko and A.L. Kipnis.- An approach to analysis of fracture of semi-bounded body under compressing along interfacial near-surface crack, by V.L. Bogdanov and A.L. Kipnis.- Fracture of composite material at compression along near-surface crack, by Mykhailo Dovzhyk , Vyacheslav Bogdanov and Vladimir Nazarenko.- Statistical Distribution of Pores in Solid and Molten Metals at Dynamic Tensile Fracture, by Polina N. Mayer and Alexander E. Mayer.- Fatigue and Deformation of Light Magnesium Alloys, by Daolun Chen.- Miscellaneous (Biomechanics, Computational mechanics, Dynamics, Nanomechanics, Plasticity, Structures, Wave propagation.- Research on Contact Pressure of Friction Pair Based on Finite Element Method, by Changlu Wang, Long Wu, Zichun Xu, Yaping Zhang, Hao Gao, Yanzhong Wang.- Noise and Vibration Analysis of a Flux Switching Motor (FSM) with Segmental Rotor, by Hedduri Sanket, MN Kishore, Nagesh Suresh.- Quenching of Non-Stationary Wave Due to Structural Transformation of Material, by D.A. Indeitsev, B.N. Semenov, D.Yu. Skubov and D.S. Vavilov.- Algorithms for System Identification, by Todor Zhelyazov, Rajesh Ruphakety and Simon Olaffson.- Mechanics of Earthquake Source Processes: Insights from Numerical Modeling, by Nadia Lapusta.- Strategies to Improve Convergence after Degeneration of the Initial Finite Element Mesh, by Todor Zhelyazov.- Parametric study of simulated randomly rough surfaces used in contact mechanics, by Rafael Schouwenaars, Miguel Ángel Ramírez, Carlos Gabriel Figueroa, Víctor Hugo Jacobo, Armando Ortiz Prado.- Simplified Analysis of the Early Stage Self-loosening of a Shear-loaded Bolted Joint, by Vincent Rafik, Alain Daidié, Bertrand Combes and Clément Chirol.- Wave Scattering by Arrays of Shear Bands, by Davide Bigoni, Domenico Capuani and Diana Giarola.- Dynamic Failure of Granular Slopes:Due to Unidirectional Stress Transfer or Multi-Dimensional Wave Propagation?, by Koji Uenishi and Tsukasa Goji.- Symposium on: "Dynamic Response of Elastic and Viscoelastic Solids Elastostatic and Elastodynamic Problems for Thermosensitive and Nonhomogeneous Solids Dynamic Problems in Mechanics of Coupled Fields," by Roman Kushnir.- Heat-active circular interphase inclusion in the conditions of smooth contact with half-spaces, by Oleksandr Kryvyi and Yurii Morozov.- Unsteady elastic diffusion oscillations of a Timoshenko beam with considering the diffusion relaxation effects, by Afanasieva O.A., Gafurov U.S. and Zemskov A.V..- Interphase inclusion and crack in an inhomogeneous anisotropic plane, by Kostyantyn Arkhypenko and Oleksandr Kryvy.- Phenomenological Model of Pseudo-Elastic-Plastic Material Under Nonstationary Combining Loading, by Pavel Steblyanko , Yuri Chernyakov, Aleksandr Petrov, Volodymyr Loboda.- Plane Scattering Problem for an Inclusion of Non-Classical Shape with a Thin Interphase Layer, by Roman Kushnir, Yaroslav Kunets, Valeriy Matus, and Oleksandr Trofymchuk.- Stress State in a Finite Cylinder with Outer Ring-shaped Crack at Non-stationary Torsion, by Oleksandr Demydov and Vsevolod Popov.- Determination by Iterative Method of Diffraction Field at the Interaction Longitudinal Shear Wave with the System of Thin Rigid Inclusions, by Vsevolod Popov.- Stress state near arbitrarily oriented cracks on the continuation of a rigid inclusion under action of longitudinal shear wave, by Misharin .S. and Popov V.G..- Stress State of a Hollow Cylindrical Body with a System of Cracks Under Oscillations of Longitudinal Shear, by Olga Kyrylova and Vsevolod Popov.- The wave field of a twice-truncated elastic cone under torsion moment impact, by K. Mysov, N. Vaysfel'd.- To the solving of the nonstationary spatial Lamb - Cerutti problem, by D. Prikazchikov, Yu. Protserov, N. Vaysfeld.- The Model of Thin Electromagnetoelastic Shells Dynamics, by VestyakV.A. and Tarlakovskii D.V..- Unsteady Electro-Magneto-Elastic Axisymmetric oscillations of a continuous cylinder of infinite length, by Vladimir Vestyak and Vasily Scherbakov.- Transient spatial motion of cylindrical shell under influence of non-stationary pressure, by Grigory V Fedotenkov, Dmitry V Tarlakovskii and Andrey Yu Mitin.- Nonstationary Dynamic Problems for Elastic and Viscoelastic Piecewise Homogeneous Bodies, by Pshenichnov Sergey.- The wave field of a layer with a cylindrical cavity, by Anna Fesenko and Nataly Vaysfel'd.- Features of Subsonic Stage of Contact Interaction of Viscoelastic Half-plane and Absolutely Rigid Striker, by Ekaterina Korovaytseva and Dmitry Tarlakovskii.- The unsteady contact interaction problem of an absolutely rigid body and a membrane, by Elena Yu Mikhailova, Grigory V Fedotenkov and Dmitry V Tarlakovskii.- Static and Dynamic Models of Bending for Elastic Sandwich Plates, by M.Yu. Ryazantseva, E.I. Starovoitov.- Analysis of vibrationinsulation properties of a plate in an elastic medium under the influence of different types of waves, by Lokteva N.A., Tarlakovskii D.V..- Studying of influence of the material anisotropy on the limit state of an orthotropic plate weakened by a periodic system of collinear cracks under biaxial loading, by Olga Bogdanova.- The Boundary-Element Approach to Modeling the Dynamics of Poroelastic Bodies, by Leonid Igumnov, Svetlana Litvinchuk, Aleksandr Ipatov and Tatiana Iuzhina.- Modeling Surface Waves on a Partially Saturated Poroelastic Half-Space, by Leonid Igumnov, Svetlana Litvinchuk, Andrey Petrov and Igor Vorobtsov.- Symposium on: "Elastostatic and Elastodynamic Problems for Thermosensitive and Nonhomogeneous Solids", by Roman Kushnir.- Residual Strength and Reliability of Corroded Pipelines - Monte-Carlo Approach for Consideration of Spatially Nonuniform Material Properties, by Alexey Milenin, Elena Velikoivanenko, Galina Rozynka and Nina Pivtorak.- Actual Problems of Structural Integrity Assessment of WWER-1000 Pressure Vessel Internals, by Makhnenko O.V., Kandala S.M..- Vibration of Titanium Blades of Turbomachines for Nuclear Power Plants with Erosive Damage, by Yurii Vorobiov, Oleg Makhnenko, Nataliia Ovcharova, Anton Olkhovskyi.- Influence of Residual Stresses in the Cladding Zones of RPV WWER-1000 on Integrity Assessment, by Oleh Makhnenko and Elena Kostenevich.- Symposium on: "Dynamic Problems in Mechanics of Coupled Fields", by Roman Kushnir.- Damping of hydroelastic vibrations of the plate using shunted piezoelectric element. Part I: numerical model, by Sergey Lekomtsev, Dmitrii Oshmarin, Natalya Sevodina.- Damping of hydroelastic vibrations of the plate using shunted piezoelectric element. Part II: experiment, by Maksim Iurlov, Alexander Kamenskikh, Sergey Lekomtsev, Dmitrii Oshmarin.- Stationary dynamic acoustoelasticity problems of a thin plate in a perfect compressible fluid, taking into account the dissipation of energy in the plate and liquid, by V.N. Paimushin, R.K. Gazizullin and D.V. Tarlakovskii.- Dynamics and elastic stability of an electrostatically actuated microbeam under ultrafast laser pulse, by Lukin A.V., Indeitsev D.A., Popov I.A., Privalova O.V.1, Shtukin L.V..- Author Index.
Erscheinungsdatum | 14.06.2019 |
---|---|
Reihe/Serie | Structural Integrity |
Zusatzinfo | XIII, 379 p. 160 illus., 95 illus. in color. |
Verlagsort | Cham |
Sprache | englisch |
Maße | 155 x 235 mm |
Gewicht | 751 g |
Themenwelt | Mathematik / Informatik ► Mathematik ► Wahrscheinlichkeit / Kombinatorik |
Naturwissenschaften ► Physik / Astronomie ► Mechanik | |
Technik ► Bauwesen | |
Technik ► Maschinenbau | |
Schlagworte | Biomechanics • Cementitious Materials • Elasticity • fatigue • fracture mechanics • nanomaterials • Optical methods |
ISBN-10 | 3-030-21893-7 / 3030218937 |
ISBN-13 | 978-3-030-21893-5 / 9783030218935 |
Zustand | Neuware |
Haben Sie eine Frage zum Produkt? |
aus dem Bereich