Frontiers of Chemical Engineering, Metallurgical Engineering and Materials III

Preface, Commitees and Sponsors
Chapter 1: Biotechnology, Medical and Chemical Engineering
Preparation of CeO2 with Different Morphologies and Its Application to Catalytic Ozonation of Aqueous Lemon Yellow Solutions
Research on the Properties of Controlling Corrosion and Scale Inhibition of the Modified Starch with Microwave loading
Experimental Research of the 2-Ethylhexyl Nitrate with Micro-Channel Reaction Production Technology
Behavior of Bone Marrow Mesenchymal Stem Cells on Collagen Scaffolds in a Dynamic Culture System
A Study on Pathway and QSPR Models for Debromination of PBDEs with Pseudopotential Method
Synthesis of Aminotriacetic Acid Intercalated MgAl-Layered Double Hydroxides and its Selective IR Absorption Properties
Optimization of Lactose Content in the Row Milk by Colorimetry via Response Surface Methodology
Synthesis, Structure Characterization and Photocatalytic Property of a Supramolecular Compound: [Co(en)3]2[H3PMo8V6O42]∙5H2O
Effect of Solvent on Ethanolysis Reaction of Natrual Soybean Phosphatidylcholine
The Basic Investigation on Catalytic Oxidation of Mine Gas to Methanol in Liquid Phase
Influence of the Composition and Preparation Methods of the Catalysts for Methane Combustion
The Development of New Active Gelled Acid and the Practical Application
Optimization Design Method for Production Parameters of Submersible Pump Well of Polymer Flooding
L-α-Glycerophosphocholine from Natural Lecithin via Transesterification Catalyzed by Propylamine
Quantum Chemical Investigation and Detonation Characterization of DNAZ·HCl
Detonation Characterization and Density Functional Theory Investigation of BDNAZ
Theoretical Chemical Investigation and Detonation Characterization of AAOF and ACOF
Synthesis of Novel Alkyl Phosphinate Double Salt and its Application in PA6
Study on the Transesterification of Phosphatidylcholine over Diethylamine
Comparative Study of Stability and Detonation Characterization of AMF and ACF
Research and Application of New Drying Process for Germanium Dioxide
Study on Solid-State Fermentation Tea Produced by Antrodia camphorate with Taizishen (Pseudostellariae heterophylla)
Structure and Composition Analysis of Egg Yolk
Healthy Dried Egg Production
The Influence Factors Study on Acid Corrosion Fracture Conductivity
The Study on Catalytic Properties of Hydrochloric Acid Doped Polyaniline
Synthesis and Characterization of Triazole-Linked Bistetrahydrobenzofuran Derivatives as Anti-Ulcer Agents
Chemical Composition of the Root Bark Oil of Litsea mollis from China
Chemical Composition of the Twig Oil of Litsea mollis from China
A Zigzag Chain Cd (II) Coordination Polymer Based on 2,4-Dinitro-benzoic Acid Ligand: Syntheses, Structure and Photoluminescence
Synthesis of Ni(II)-imprinted Mesoporous Silica Adsorbents by Surface Imprinting Technology for Removal of Ni(II) from Aqueous Solution
Effect of Temperature on Activities of Cell Wall Enzymes of Kiwifruit during the Shelf Life
The Application and Synthesis of Dipolyethylene Glycol Maleate
Food Grade Bioplastic Based on Corn Starch with Banana Pseudostem Fibre/Bacterial Cellulose Hybrid Filler
Synthesis of Sodium Carboxymethyl Cellulose Based on Pretreated Bamboo Shaving
Application of Foam Separation Technology to Tea Saponin Extraction
Effects of Compound Probiotics on Growth Performance, Intestinal Microflora and Immune Function of Broilers
Influence of Synthesis Parameters on the Formation of SAPO-5 from Metakaolin
Synthesis of 4-Subsituted-9-(2-deoxy-β-D-ribosyl)-7H-pyrimido[4,5-b]indole
An Improved Synthesis of Isonucleoside of Tubercidin
Synthesis and Crystal Structure of 1-(2R,3S,4R,5R)-3-fluoro-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)-5-iodopyrimidine-2,4(1H,3H)-dione
An Improved Total Synthesis of 5'-Deoxytoyocamycin
An Efficient Synthesis of 5-Bromo-4-chloro-3-indoxyl Choline Phosphate
Reductive Transformation of p-Nitrophenol by the Effect of the Low Crystalline γ-FeOOH and Oxalic Acid
Expression and Identification on the MPB83-MPB70 Fusion Gene of Mycobacterium bovis in Escherichia coli
Isolation and Expression Analysis of a Putative CIPK Gene in Halophyte Sesuvium portulacastrumand L.
Synthesis of Methyl Methacrylate/Acrylic Acid/N, N’-4, 4’-Diphenylmethane-bismaleimide Copolymer and its Electricity Storage Characteristics
Inhibition of Tumor Cell Proliferation In Vitro by Benzamide Derivatives
Visible-Light-Induced Degradation of Rhodamine B by Wool-Fe Catalyst
Osteogenic Differentiation of ADSCs in Novel Microbeads in Dynamic Environment
Preparation and Properties of Acidified Prevulcanized Natural Rubber Latex
Application of Rabbit Protein in Calligraphy Paper
Determine the Consumption of Fluorescent Scale Inhibitor SC260 Using Dibenzofuran-2-Sulfonic Acid Hydrate
The Effect of Granulosa Cells Apoptosis on the Cumulus Expansion and the Developmental Competence of Bovine Oocytes
Synthesis, Crystal Structures and Properties of Two Transition Metal Complexes Based on 4, 4'-{[2, 2'-(ethane-1, 2-bicarboxymethyl)] amino-bis(acetyl)} Dibenzoic Acid
Synthesis, Structure Characterization and Photocatalytic Property of a New 3-D Polyoxovanadate-Based Organic-Inorganic Hybrid Compound
Density Functional Theory Investigation and Detonation Characterization of DNPDNAZ
Analysis Structure and Composition of Egg Yolk
The Effect of MgO Precoating on the Perfomance of Ni/MgO-Al2O3 Catalysts for Carbon Dioxide Reforming of Methane
Black Liquor Treating of Wheat Straw Pulping Using Microwave Radiation
The Adaptability in Polymer Flooding to GuoPu Oilfield of Childers - Jayne Childers
Preliminary Metabonomic Analysis of Diabetic Rats Treated with Paired Extracts of Astragalus and Chinese Yams
Effect of Calcination Temperature of Carbon Doped TiO2 (C-TiO2) on Photocatalytic Activity under Visible Light
Photocatalytic Degradation of Reactive Red 195 Using Wool-Supported Fe(III) Complex as a Highly Active Heterogeneous Catalyst
Chapter 2: Material Engineering and Technologies, Applied Materials
A 2D Irregular Shape Model of Random Packing for Cement Particles
Research on Even Ways of LY12 Semi-Gobbler Thickness Distribution of Super Plastic Expand Forming
Determine the Average Particle Size of Silica Sol
Synthesis and Characterization of Monodisperse Spherical SiO2@Y2O3: Tb3+ Particles with Core-Shell Structure
Numerical Investigation of Size Effect on Dry Friction Behavior in Micro Upsetting Process
Investigation on Micro-Structure Evolution of Mg-12Gd-3Y-0.5Zr Magnesium Alloy under High Velocity Impact
The Influence of Cr2O3 on the Sulfur Capture Efficiency of CaO in Pulverized Coal Combustion Process
Properties of Indium Tin Oxide Films Prepared by Two-Targets Magnetron Sputtering
Study on Equilibrium of Hydroxyl Complex Ions in Al3+-H2O System
Evaluation and Measured Analysis by FTIR of Fiber Insulation Materials Used in Inflatable Mini Cold Storage
Compression Resistance of Polythene Coatings for Welded Joint on Pipeline
Progress of Research in the Action Mechanism of Grain Growth Inhibitor for Cemented Carbide
Sol-Gel Synthesis and Characterization of Nanocrystalline Bi4Ti3O12 Powders
Selection of Ion Exchange Resins for Tungsten and Molybdenum Separation
Zinc Oxide/Polyaniline Transparent Conductive Film Prepared by In Situ Polymerization Deposition
Molecular Weight and its Distribution of PET Depolymerization Residue under Microwave Irradiation
A Multi-Scale Analysis of Mechanical Strength of Solid Catalysts
The Study of Nanolithography Processing on the Photoresistor Thin Film by Atomic Force Microscopy
The Synthesis and Characterization of Dispersant for LiFePO4 Lithium Ion Battery Slurry
Method for Making Artificial Core Using Dry Cement as Cementing Agent
Enhanced Absorption and Raman Scattering Signal in Cu2ZnSnS4 Film through Excitation of Surface Plasmon Polaritons
Numerical Simulation of Flow Process of Ammonium Persulfate Crystallizer
Analysis Impact of Ribbed Composite Panels for Framework Seismic Performance
Research on Optimization Design of EPS Module Reinforced Concrete Frame Structure
Microstructure and Properties of Longitudinal Submerged Arc Welded Linepipes for Deep-Sea Pipeline
Relationship between Diamond Particle Size and Thermal Conductivity of Cu-Diamond Composites
Preparation and Investigation on Properties of the MgTiO3-CaTiO3 Microwave Ceramic Materials
Effect of Fumed Silica and Zinc Borate on the Thermal Property of ABS/Magnesium Hydroxide Flame Retardant Composites
Preparation of Flaky Alumina Powder by Molten Salt Synthesis Method
Preparation, Characterization and Physical Properties of Polyvinyl Alcohol-Layered Clay Nanocomposites
Formation and Magic Number Characteristic of Clusters during Rapid Solidification of Mg2Ca
The Effect of SiC Particle Size on the Microstructure and Hardness of SiCp/Cu Composites
Understanding and Assessment of Ancient Chinese Pig Blood–Lime Mortar
XFEM for Crack Propagation in Fiber-Reinforced Materials
Effect of B4C Content on Densification Behavior of SiC-B4C Ceramics
Influence of Additives Content on the Sintering Behavior of SiC Ceramics with Al2O3/La2O3 Aids
Influence of KF Concentration on the Coating Performance of SiCn/Mg Composites
Impact of Rubber Modifier on the Rheological Properties of Asphalt
Preparation and Properties Research of Mesoporous Low-k Silica with Electric Field Induction
Determination of Titanium Oxychloride in Refined Titanium Tetrachloride by Infrared Spectroscopy
Preparation and Properties of Glycerol Plasticized-Corn Starch/Titanium Dioxide-Starch Bionanocomposites
Effect of Ar Annealing Temperature on SiO2/SiC: Carbon-Related Clusters Reduction Causing Interfacial Quality Improvement
Studies on Water Repellency of Super-Hydrophobic Surfaces
Deep Level Centers in Carbon-Doped High Resistivity GaN
An Experimental Study of Pig Blood–Lime Mortar Used on Ancient Architecture in China
Geopolymer Materials Treatment of Calcium Arsenate Waste for Arsenic Immobilization
Chapter 3: Metallurgical and Mining Engineering, Manufacturing Engineering Applications
450°C Stress Rupture Properties of a Non-Quenched and Tempered Steel MFT8
A Novel Technology of Molybdenum Extraction from Ni-Mo Alloy
Analysis of Crimping of Large Diameter Welding Pipe
Analysis of Large Inclusions in Q195 Steel
Desulfurization of Petroleum Coke via Alkali Calcination
Dynamic Simulation Model of 300MW Oxy-Combustion of Pulverized Coal Boiler
Effects of over Heat and Casting Speed on Quality of GCr15 Billet
Effects of Preparation Methods on Morphologies of Alumina Templates and Cu Nanowires
Effects of Rotation Speeds and Media Density on Ground Calcium Carbonate during Ultrafine Grinding Process in Planetary Mill
Experiment Study on Accessories Matching of Anchor Bolt Support System in Coal Mine-A Case Study
Experimental Study on Properties of Coal and Coke Dry Quenching Dust Blend
Fluidization Properties and Mixing Properties of Binary Mixtures of Quartz Sand and Coal Char in Fluidized Bed
Laboratory Research on Catalysis Combustion-Supporting Agent of Coal
Mathematical Simulation and Optimization of Structure and Performance of Air Way of Purging Plug in Ladle
Microstructure and Wear Properties of Fe-Based Alloy Coating
Microstructure Transition during Rapid Solidification of Liquid Metal Zn
Quantitative Analysis of Steels Using PLS with Three Data Reduction Methods Based on LIBS
Recovery Pb, Zn and S from a Chinese Lead-Zinc Mine Beneficiation Plant Tailing
Research on Kinetics Behavior of Nitrogen Gas Absorption in Fe-Cr-Mn(Mo) Alloy
Research on New High Efficiency Recovery Process for Complex Refractory Copper Slag Resources
Research on the Effects of the Capillary Wall and the Different Flow Rate to the Process of the Drop Formation in the Developing Nozzle
Security Analysis on Single-Screw Extrusion Process of Solid Propellant by Numerical Simulation
Study and Application of Magnesium Removal Technique in Zinc Hydrometallurgy
Study of Synthesis of SiO2 Aerogel from Coal Gangue at an Ambient Pressure
Study on Mechanical Properties at High Temperatures and Microstructure of Mg-12Gd-3Y-0.5Zr Magnesium Alloy
Study on the Limestone-Gypsum Sintering Flue Gas Desulphurization Technology in Iron and Steel Plant
The Phase Transformation and Melting Behavior of Micro-Nano Iron
The Pilot Plant Design and Operation Scheme Research on Treatment of Fluoride Flue Gas by Wet Absorption in Electrolytic Aluminium Industry
Study on Recovery of Metals from Printed Circuit Board Using a Gas-Liquid Fluidized Bed
Biooxidation of High-Sulfur Refractory Gold Concentrate by Ferroplasma acidiphilum
DSC Study of Recrystallization in Wiredrawn Industrial Copper
Leaching of Niobium from Low-Grade Refractory Ore Using H2SO4 Roast System
The Designation of the Collector in Aluminosilicate Minerals Flotation and the Study of its Mechanism
Study on the Dephosphorization of Semi-Steel in Ladle
LuZiYuan Lead-Zinc Mine Hydrogeological Conditions and Geological Environment Evaluation
Pulverizing System Simulation Model of a 300MW Oxy-Fuel Coal Fired Boiler
Simulation Model for ASU Distillation Column of a 300 MW Oxy-Fuel Pulverized Coal Boiler
Study on Forming Limit of Irregular Axial Holes Formed by Open-Die Cold Extrusion
Simulation Study on Oscillating Cavitation Nozzle for Cleaning Based on FLUENT
A New Technology for Preparing Rich-Titanium Material by Hydrometallurgy
Thermal Stress Development in Steam-Side Oxide Scales in High Temperature Components of Boilers under Thermal Shock
Chapter 4: Energy and Power, Wells, Resources and Flow Development, Environmental Engineering and Technologies
A New Model of Non-Parametric Estimation for Short Term Wind Power Prediction
An Integrated Comparison for Working Fluids Selection in Both Subcritical and Supercritical ORC
Analysis of the Pressure Response of Kick Control in MPD
Application of Artificial Wetland Technology in Rural Water Pollution Control
Comprehensive Evaluation Method of ORC System Performance Based on the Multi-Objective Optimization
Diethyl Phthalate Removal from Water by CTMAB-Bentonite
Disposal of 3.5-dinitro-benzoicacid Wastewater by Semi-Coke/Ozone Combined Technology
Modeling Energy Demand and Carbon Emissions from Transport in Shanghai
Exploration of Extracting Hydrogen Energy with Converter Waste Gas
FAAS Determination of Zinc in Water Samples after Enrichment by Coprecipitation with Mn(II)-5-Br-PADAP
High Efficient Treatment of Coal Gasification Wastewater by Precipitation and Photocatalysis Process
Manganese Removal from Electrolytic Manganese Residue Using Ozone
Numerical Simulation and Experimental Study on Heat Pipe PV/T System
Numerical Simulation of C1 Cyclone in a 5000t/d Cement Clinker Production System
Carbon Reduction in Mega Event’s Building: a Case Study of China Pavilion
Pilot-Scale Study on Electrosorption Technology for Reclaimed Treatment of Power Plant Industrial Wastewater
Performance Study of Ignition Tube about Shock Overload
Research on the Control Strategy of District Cooling System Based on Part-Load Ratio
Study on the Application of Gob Drainage Pipe Technology in Gas Controlling at the Upper Corner of Working Face with U Type Ventilation System
Simple and Eco-Friendly Hydrothermal Synthesis of Luminescent Carbon Nanoparticles for H2O2 Detection
Simulation Analysis on Harmonics Pollution of Large-Scale Wind System Accessed to Grid
Sustainable Development of Ecological Environment Dahongshan Iron of Kunming Iron and Steel
The Main Problems of China's Environmental Policy and Countermeasures
The Reliability Study and Application of Isolated Network Operation of Coal-Fired Power Plant
Voltage Sag Frequency Assessment Considering Uncertain Influencing Factors in the Power System
Lagrangian Relaxation Algorithms for Hybrid Flow-Shop Scheduling Problems with Energy Saving
Object-Oriented Method of Constructing Electric Power System Domain Ontology Based on Protégé
Research Review of Recycling of Nonmetal Fraction from Waste Print Circuit Boards Treatment
Application of Fuzzy Set Theory in Water Resources Coordinated Development Evaluation of Jilin Province
Research on Water Pollution and Control Technology in Rural Areas
Spatio-Temporal Variations of Aerosol Optical Depth over Areas Around Beijing in Recent 14 Years
Chemical Process of Carex meyeriana Mire Wetland in Wuyiling in Yichun in Northeast China
Study on Optimization of Cationic Resin Regeneration Conditions
The Catalytic Properties of Copper Catalysts Prepared by Coprecipitation Method
The Design of High Power LED Driver Power Supply Based on the Pattern of LLC Harmonic
Formation Pressure Calculation Based on Modified Flowing Material Balance Method
The Stability of Copper Catalyst in Treating the Acid Red B Wastewater
The Preparation of Iron Ore Tailings Bio Ceramic Filter Material and Domestic Sewage Treatment
The Research of Resource Utilization of Sludge as Additives for Cement Building Materials
Discussion on Leakage Detecting Techniques for Natural Gas Pipeline
Experiment Research on Effect of Leak Point and Load Point's Distribution on Gas Leak Pipeline Network