Finite element analysis of the buckling critical loads in un-braced steel frames with multiple slenderness ratio configurations

Research Paper (postgraduate) from the year 2013 in the subject Physics - Mechanics, grade: 3.70, University of Weimar, language: English, abstract: In this paper, two types of steel frames, steel frame without side sway permission and another with side sway permission are created in Abaqus with 10 multiple slenderness ratio of the columns by changing the length every time starting from 1 M and ending with 10 M length of the columns, Twenty models of steel frames with single story and single bay were created, the models are with the same 2D dimensions and material properties, the cross section of the steel is (0.5*0.5) M ,and the supports are fixed, two equal forces P= 1000 N are exerted on the frames in the position mentioned in fig 6, a beam section was defined for the frame integrated before analysis with Young modulus of elasticity E=1*107 N/M2 , and shear modulus G = 3.8*106 N/M2 and poisons ratio ni = 0.3.A linear perturbation step is created for buckling and 10 eigenvalues are requested for analysis, a standard quadratic beam element type is generated with global seeding of 0.6, and 20 Jobs are created for every situation and conclusions have been obtained, the critical buckling loads of the frames fall in the ranges between the Euler loads forms which has been proved for each type of frames and this scientific approach was verified in this research, in addition to that the relation between the length of the column and the eigenvalues that represent the critical loads of buckling verified, and the simulations of the mode shapes of buckling of the steel frames were identified adopting finite element analysis which shows the amount of loads necessary to reach each mode shape of buckling for each type of steel frames mentioned before.