Testing and Evaluation of Inorganic Materials III
Trans Tech Publications Ltd (Verlag)
978-3-03785-617-8 (ISBN)
- Titel nicht im Sortiment
- Artikel merken
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The focus of this special collection was set on materials properties and testing techniques, it covers most aspects of testing techniques on mechanical, chemical, physical properties and microstructures of ceramics, glass and concrete. It is hoped the collection will promoted the research and development in the field of testing and evaluation of inorganic materials.
Preface
Chapter 1: Raw Materials and Processing
Synthesis of Dispersed Y2O3 Nanopowder from Yttrium Stearate
Preparation and Characterization of Gd2Zr2O7 Nanoparticles via the Citric Acid Chelating Agent Method
Preparation of Ultrafine Al(OH)3 Powders from Scrap Aluminum
Synthesis of LaFeO3 Nano-Powders by Self-Propagating Combustion Method of Sol-Gel
Synthesis and Photo-Catalytic Properties Characterization of Graphene/TiO2 Nanotube Composites
Preparation of the Ceramic Hollow Balls of Aluminium Titanate-Based by Rolling-Ball Method
Preparation of Porous Silicon by Magnesiothermic Reduction from Serpentine
Effect of Ball Milling on the Properties of Zirconia Powder Prepared by Alcohol-Aqueous Coprecipitation Method
Study on Extraction of Alumina from Sericite Phyllite
Preparation of High Performance SiCf/SiC Composites through PIP Process
SiC-TiB2 Composite Densified by Pressureless Liquid-Phase Sintering
Effect of Cerium Oxide on Sinterability, Microstructure and Properties of Anorthite-Based Glass/Ceramic Composites
Preparation and Characterization of Al2O3-Kaolin Composite Porous Ceramic Used as Ceramic Membrane Support
Preparation and Characterization of Nb2O5-Al2O3 System Ceramics with Different Al2O3 Additions
Study on Preparation and Properties of Yttria Stabilized Zirconia Solid State Electrolyte
Synthesis and Properties of Composite Stabilized ZrO2
Preparation and Characterization of Pt/YSZ Electrode of Zirconia Oxygen Sensor
NiO Sensing Electrode for NOx Detection at High Temperature
A Review on Fabrication Methods of BiFeO3 Thin Films
Study on Performance of Ru-Ir-Ti/Ti Oxide Coating Anodes Prepared with Method of Surface Nitriding on Titanium
The Mechano-Chemical Synthesis and Characteristics of PMN and PZT
Preparation and Properties of Sr2NaNb5O15 Lead-Free Piezoelectric Ceramics by Sol-Gel Method
Preparation of High Performance Pt Counter Electrodes on Conductive Plastic Substrate for Flexible Dye-Sensitized Solar Cells
Effect of Vitique Esthetic Cementation on Tetracycline Stained Teeth-Mask with Different Simulated Staining Levels Following IPS-Empress II Ceramic Veneers
Effects of Graphite Mold on Cooling Process of Fused AZS 33# Refractory
Preparation of the Sulfur-Free Expanded Graphite Using Induction Heating Method
Preparation and Properties of Bacteriostatic Sponge
Influence of Bentonite on Properties of Glass-Based-Sintering Material for Borehole-Wall Renovation
Study on Joining of ZrO2 Tape-Casting Substrates and Adhesive Mechanism
Chapter 2: Chemical Composition and Microstructure
Measurement and Characterization of the Particle Size of Refractory Corundum
Effects of Sol Network Modifiers on Preparation, Morphology and Phase Composition of Zirconium Diboride Nano-Powders by Novel Sol-Gel Technology
Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method
Synthesis and Characterization of FeO+ Nanosheets
The Preparation and Characteristics of MMT Nanosheets
Properties Related Phase Evolution in Multilayer Silicate Ceramics
Grain Boundary Phase Analysis for Y2O3-Doped AlN Ceramics
Joining of C/SiC Composite and TC4 Alloy Using 70Ag28Cu2Ti Active Brazing Alloy
Study on the Gemological Characteristics of Amber from Myanmar and Chinese Fushun
The Study on Composition and Heat Treatment of the Fei-Color Jade
Study on the Microstructure of Inorganic Fullerene-Like WS2
The Influence of Alumina Addition on the Microstructures of YSZ
Microstructure Analysis of the ZrO2/Al2O3 Multi-Phase Ceramics
Study on the Microstructure and Morphology of Sintering Process of SiC-TiB2 Composite
Microstructure Observation and Analysis of Sintered SiC Ceramics by SEM
Textural Properties of Nanocrystalline Hydroxyapatite Synthesized via a Microwave-Hydrothermal Process
Influencing Factors of Macrosporous Ordering in TiO2 and ZrO2 Inverse Opals
Doping Effect of Alkali Ions on the Microstructural and Electrical Properties of ZnO-Pr6O11-Based Varistor Ceramics
A Review of the Influential Factors on the Ferroelectric Domain Structure in BiFeO3 Thin Films
Effect of Ar Pressure on Properties of Polycrystalline CdZnTe Films
Effect of Oxygen Partial Pressure on Properties of ZnO Films Deposited on Freestanding Diamond Films
Properties of Li-Doped ZnO Films Deposited on Diamond Films
Interfacial Reactions between Polymer Derived SiC Fiber and Ti3Si(Al)C2
Crystal Structure Stabilization of Gadolinium Aluminum Garnet (Gd3Al5O12) and Photoluminescence Properties
Structural Features and Color Tunable Photoluminescence of the Binary and Ternary Layered Rare-Earth Hydroxides of (Y,Ln)2(OH)5NO3·nH2O (Ln=Tb, Eu)
Structure and Luminescence Characteristics of Yttrium Hydroxide Nanosheets Doped with Tb3+
Chapter 3: Mechanical and Physical Properties
Theoretical and Experimental Studies on Strength and Stiffness of Vacuum Glazing
Mechanical Properties of Dental Porcelain Discs by Different Producing Methods
Preparation and Mechanical Properties of a Novel Biomedical Magnesium-Based Scaffold
Effect of Nb2O5/La2O3 Additions on Mechanical Properties of Al2O3 Ceramics Prepared by Microwave Sintering
Effects of Calcium Hexaluminate Addition on the Mechanical Properties of Zirconia-Toughened-Alumina
Study on Mechanical Properties and Toughening Mechanism of MWCNTs/Ti(C, N) Cermets-Based Composites
Comparisons of Microstructures and Hardness Distribution between Clinocardium Californiense and Veined Rapa Whelk Shells
Effects on Cold Modulus of Rupture and Cold Crushing Strength of One Low Cement Refractory Castable (LCRC)
The Influence of Steel Cover Thickness on Ballistic Performance of Confined TiC-TiB2 Ceramic Tiles against the Impact of Long-Rod Tungsten Alloy Penetrator of 1.4 km · s-1
Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Tungsten Alloy Projectiles of 1.4 km · s-1
Properties Analysis of Corundum Castables and Corundum MA Spinel Castables
Evaluation of High Temperature Interfacial Bonding Strength of Ti3SiC2-Al2O3 Joint in Air
Cyclic Contact Fatigue of Dental Porcelain
Effect of Coupled Conditions of Thermal Cycle and Dump Environment on Microstructure of 5mol% Yttria Stabilized Zirconia
The Chemical Plating Copper of the SiC Particles and Thermal Expansion Behavior of the SiCp/Cu Composites
Thermal Stress Analysis of Photovoltaic Hollow Glass Based on ANSYS
Effect of CrTiAlN Coatings on High-Temperature Oxidation Behavior of H13 Steel
Fabrication and Oxidation-Resistance Property of Coated ZrB2-YAG-Al2O3 Multi-Phase Ceramics
Corrosion Behavior of ZrO2-Mo Composite in Na2SO4 Solution
Preparation and Thermoelectric Properties of Ca3Co4O9 Ceramics with Parallel Sheet Shaped Pores
Photoluminescence Characteristics of Sol–Gel Derived ZnTiO3 Doped with Ni2+ Ion
Research on Electrode Propertie of Heater for Planar Oxygen Sensor
NO2 Response of Solid Electrolyte Sensors Made Using ZnFe2O4 Electrode
Effect of NO2 Concentration on Sensitivity for High Temperature Impedancemetric NOx Sensors
Bonding and Electrochemical Property Test of Zirconia Ceramics
The Effect of Liner Thickness on the Color of Y-TZP Based All-Ceramic Restorations
Study on Biocompatibility of Nano-TiO2 / Titanium Alloy
Test of Relative Translucency for Four All-Ceramic Core Material after Veneering Ceramic
A Comparative Study on Relative Translucency of Four Dental All-Ceramic Core Materials
Effect of Post-Core Materials on the Color Value of Four Dental All-Ceramic Cores
Performance Research on Photovoltaic/Thermovoltaic Solar System in Building Integrated Photovoltaic (BIPV)
Research on Performance of Photovoltaic Insulating Glass Modules in Building Integrated Photovoltaic (BIPV)
Early Age Property Study of Phosphate Cement by Electrical Conductivity Measurement
Testing and Evaluation on the Chloride Ion Penetrability of Concrete under Compressive Stress
The Research on Jadeite-Jade Lavender Based on CIE DE2000
Absorption Enhancing Effect of Sodium Dodecyl Sulfate on Metformin Hydrochloride in Rat Colon
Chapter 4: Testing Technique and Devices
A Sample Holder for X-Ray Powder Diffraction Studies of Flakiness and Block Sample
Investigation about Dilution Ratio Effect on X-Ray Intensity
Research on Influence of Diffractometer Slits on XRD Pattern
Determination and Evaluation of Dead Time for X-Ray Fluorescence Spectrometer
Resonant Inspection of Ceramic Tiles
Thermal Fatigue of Ceramics: Theory, Life Predication and Characterization Methods
Measuring Isostatic Pressing Strength of Hollow Glass Microspheres’ by Mercury-Injection Apparatus
Experimental Research on Granule Moisture Measurement by Microwave Resonance Technology in a Fluidized Bed Dryer
Testing and Evaluation of Mechanical Properties for Anisotropic Engineering Materials with Varied Loads
The Study of Equipment for Testing High Temperature Elastic Modulus Based on the Acoustical Resonance Method
Development of the Coaxiality Calibration System Based on the American Standard ASTME1012
Usability of Effective Medium Model for Microwave Absorbing Ceramics
Three-Dimension Impedance Representation for Microwave Absorptive Ceramics
The Difference of Jadeite-Jade Lavender under Three Light Sources
Study on Minimum Teeth without Undercutting of Involute Gears with 14.5 Degree Pressure Angle
The Programming of Dentistry CCS/CCM Software
Improve the Profit from Principal Operations of Our Listed Ceramic Companies through Test Technology and Quality Management
Reihe/Serie | Key Engineering Materials |
---|---|
Zusatzinfo | Illustrations, unspecified |
Verlagsort | Zurich |
Sprache | englisch |
Maße | 170 x 240 mm |
Gewicht | 1100 g |
Themenwelt | Naturwissenschaften ► Chemie ► Anorganische Chemie |
Technik ► Maschinenbau | |
ISBN-10 | 3-03785-617-3 / 3037856173 |
ISBN-13 | 978-3-03785-617-8 / 9783037856178 |
Zustand | Neuware |
Haben Sie eine Frage zum Produkt? |
aus dem Bereich