Functional and Functionally Structured Materials IV

Preface
Chapter 1: Properties and Processing Technologies of Structural Alloys and Non-Ferrous Metals
Removal Mechanism of Titanium Alloy Material in Ultrasound Vibration Drilling
Effect of Strontium Modification on the Morphology of Primary Si in Hypereutectic Al-Si Alloys
Deoxidation Process of Oxidized Zirconium Alloy
Effects of Alloying Process on Inclusions in Fe-9Cr Alloy Reinforced with Y2O3 Nanoparticles
Microstructure Formation and Nanoindentation Behavior of Rapidly Solidified Cu-Fe-Zr Immiscible Alloys
Effect of RE Addition on the Solidified Process and Microstructure of Al-7Si-0.3Mg Alloys
Correlation between Solidified Microstructure Evolution and Undercooling of Au-12 Wt.%Ge Eutectic Alloy
Mechanical and Tribological Behaviors of WAl12 Reinforced 2024 Aluminum Alloy Matrix Composites
Research on Strong Spinning Process of GH4169 Alloy
Preparation of Titanium Alloy Powder by Plasma Rotating Electrode Process
Microstructure and Mechanical Properties of 5052 Al Alloy by Cryogenic Rolling
Microstructure and Mechanical Properties of GMAW Welded Joints Er-Containing Aluminum Alloy
Penetration Damaging Behavior of TB17 Titanium Alloy
Effect of Extrusion Temperature on Microstructure and Mechanical Properties of 7A36 Aluminum Alloy
Investigations on the Hardness Distribution and Microstructure of Friction-Stir-Welded 6082 Aluminum Alloy
Microstructure of 7N01 Aluminum Alloy Microalloyed with Er and Zr in the Homogenization Process
Microstructure and Macrosegregation of Ф508 mm 7050 Aluminum Alloy Billet under Internal Electromagnetic Stirring
Microstructure of 7075 Aluminum Alloy by Homogenization
Modeling of Yield Strength in Retrogression of RRA Treatment of Spray Formed Al-Zn-Mg-Cu Alloy
Effect of Ca and Zr Additions and Aging Treatments on Microstructure and Mechanical Properties of Mg-Sn Alloy
Effect of Ca on Microstructure and Mechanical Properties of Directionally Solidified Mg-Zn-Ca Alloys
Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts
Study on Compression-Torsion Deformation Behavior and Recrystallization Grain Size of Mg13Gd4Y2Zn0.5Zr Alloy
Microstructural Evolution and Properties of Cu-1.5 Wt %Ti Alloy during Aging
Microstructure, Texture and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Repetitive Upsetting-Extrusion after Heat Treatment
Microstructure and Properties of Rapidly Solidified Al-Zn-Mg-Cu Alloy
Microstructures and Mechanical Properties of a New Type of High Temperature Titanium Alloy
Effect of Primary α Phase Content on Creep Property of High Temperature Titanium Alloy
Effect of Heat Treatment Process on Microstructure of a New Metastable β Titanium Alloy
Hot Compressive Behavior and Constitutive Equation of Ti-Al-Nb-Zr-Mo-Cr Alloy
Constitutive Equation and Hot Processing Map for Tensile Test of Mg-13Gd-4Y-2Zn-0.5Zr Alloy at Elevated Temperature
Semi-Solid Rheological Squeeze Casting Process of ZL114A Aluminum Alloy Thin-Wall Complex Casting
Effect of Different Deformation Methods on Microstructure Evolution of TC4 Titanium Alloy Prepared by Spark Plasma Sintering
Fatigue Crack Growth Behavior of TA29 Titanium Alloy at Different Temperatures
Preparation of 2A14 Aluminium Alloy Large-Sized Hollow Ingots by Electromagnetic Stirring DC Casting
Structure Evolution of Au50Cu50 Alloy from Melt to the Disordered Solid Solution
Solidification Microstructure and Mechanical Properties of Bulk Near-Eutectic AlCoCrFeNi2.2 High Entropy Alloy
Effect of Combined Electromagnetic Fields on Microstructure and Properties of Large-Sized Ingot of 2219 Aluminum Alloy
Mechanical Behavior and Microstructure of Hot Deformation of with Er 7N01 Aluminum Alloy
Oxidation Behavior of Ta-W Alloy
Precipitation Behavior and Strengthening Mechanism of Second Phases in AZ31-1.3Ca-1.0Sm-0.3La Alloy
Microstructure of Ti-Based Alloys after Rapid Solidification
Effect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu Alloy
Analysis of Porosities in Nickel-Based Superalloys Powders
Ultrasonic Preparation of Submicron Low Melting Point Alloy Powder
Non-Isothermal Kinetics Analysis of α→β Transformation in Zirconium Alloy
Microstructure and Mechanical Properties of a Novel Ti-6.5Al-2Sn-4Zr-1.5Mo-2Nb-0.25Fe-0.2Si High-Temperature Titanium Alloy
Effect of Cu Content on Ageing Behavior for AA3104-H19 Can Body Sheet

In Situ Observation on the Deformation Behavior of Primary α-Ti in a Textured Ti-6Al-4V
Development of Copper Alloy-Steel Bimetallic Bearing Materials and Manufacturing Technology
Microstructures and Phase Formation of Refractory MoNbTaVZr High Entropy Alloy
Preparation and Properties of Spherical Mo Powders by Plasma Rotating Electrode Process for Additive Manufacturing
Effects of Electromagnetic Agitation on Crystal Growth during the Pure Aluminum Slow Cooling Process
A Review on Water Footprint Research of Materials Industry
Progresses on Development of Manufacturing Methods of High Purity Tungsten Targets
Finite Element Analysis on Processing of PCD End-Mill Milling Copper
Microstructure and Texture Evolution of 0.6 mm Ultra-Thin-Walled Tubes of Magnesium Alloys Fabricated by Multi-Pass Variable Wall Thickness Extrusion (VWTE)
Microstructural and Textural Evolutions of OFHC Cu during the CECC Process and Annealing Treatment
Chapter 2: Properties and Processing Technologies of Structural Steels
Growth Kinetics of Interfacial Intermetallic Compound in Al(AA4343)/Steel(SUS316) Clad Strip
Microstructure and Properties of 20G/316L Dissimilar Metal TLP Welded Joints
Microstructure and Properties of Lean Duplex Stainless Steel UNS S32101 Welded Joint by Hot Wire TIG Welding
Effect of Thermal Aging on the Stress Corrosion Cracking Sensitivity of Z3CN20.09M Stainless Steel
Static Recrystallization Behavior of Non-Quenched and Tempered Steel 38MnSiVS
Effects of Zero Time Holding Quenching Temperature on Tempering Microstructure and Mechanical Properties of 40Cr Steel
Simulation of Mechanical Property and Fracture Behavior of Reactor Pressure Vessel Steel by Small Punch Test
Effect of Ferritic Hot Rolling Process on Microstructure and Properties of IF Steel
EBSD Study of the Effect of Hot Deformation on Low Carbon Bainitic Structure
Retained Austenite Control and Extra-Cryogenic Impact Toughness of Fe-3.0%Mn Low Carbon Steel
Prediction Model for Microstructure and Properties of Medium Carbon Non-Quenched and Tempered Steel Bar
Effect of Composition System on Microstructure and Properties of 1000-MPa Grade Cold Rolled DPSteel
Accelerated Transformation of Hot Deformed Austenite in SCM435 Steel
Effects of Final Cooling Temperature on Microstructure Transformation and Properties of Q550 Low Carbon Bainite Steel
Reliability Prediction of Variable Amplitude Corrosion Fatigue Life of TP140 Casing Steel
Comparative Study on Hydrogen Embrittlement Susceptibility in Heat-Affected Zone of TP321 Stainless Steel
Investigation on the Microstructure and Mechanical Properties of T23 Steel during High Temperature Aging
Optimized Design of Ultra-High Strength Stainless Steel Based on Thermo-Calc Calculation
Effect of Tempering Temperature on Microstructure and Properties of Low Carbon High Silicon Alloy Steel Treated by Q-P-T Process
Analysis of Interfacial Bonding Strength and Microstructure of Rolled Clad Plates
Applications of Nickel-Based Alloy for Oil Country Tubular Goods
Analysis of Tensile Properties of N80Q Steel and 80SH Steel
Application Feasibility Study of High Strength Pipeline Steel to Rig Derrick and Substructure
Mechanical Response and Performance Relationship of X70 Pipeline Steel with Weld Zone
Chapter 3: Polymers and Composites
Preparation and Property of Waterborne Polyurethane/Cellulose Nanofiber Nanocomposite Films
Preparation and Magnetic Properties of Fe@SiO2 Soft Magnetic Composites
Microstructure and Properties of Co@RGO/Cu Composites by One-Step In Situ Reduction Method
Functionalization of MWNTs and its Influence on Thermal Performance of Modified Diphenyl Ether Polyimide Films
Manufactory and Properties of Poly(p-Phenylenebenzobisoxazole) Aerogels Prepared by a Simple Freeze-Drying Procedure
Preparation and Properties of Halogen-Free Flame Retardant Polyurethane for Superfine Fiber Leather
Effect of Simulated Seawater on Flexural Property of Corn Straw Fibers Reinforced Polypropylene Composites
Effect of Carbon Nanotubes Sizing Agent on the Mechanical Properties of Carbon Fiber/PP Composite
Synthesis of Four-Armed Star-Shaped Poly(N,N- Diethylacrylamide) by Group Transfer Polymerization in the Presence of Hydrosilylane
Effect of Air Oxidation Treatment on Interficial Properties of Carbon Fibers
Preparation of Silver Nanoparticles-Loaded Gel Fibers Based on Microfluidic Method and its Application as SERS Substrates
Effect of Copoly(Ester-Amide 6)(PET-PA6) on Compatibility of PET/PA6 Blended Fibers
Effect of Casting and Additive Manufacturing on the Microstructure and Mechanical Property of Al-Cu Composites
Effect of Graphene Content on Microstructure and Properties of Gr/Cu Composites
Effect of SiC Defects on Performance of Particle Reinforced Aluminum Matrix Composites
Effects of Sintering Parameters and WC Addition on Properties of Iron-Nickel Pre-Alloy Matrix Diamond Composites
Effects of Retrogression Treatment Process on the Mechanical Properties and Corrosion Behavior of the Graphene/7075 Aluminum Matrix Composite
Semi-Solid Precision Forming Process of High-Strength and Wear-Resistant Aluminum Matrix Composites
Chapter 4: Advanced Functional Materials
High Temperature Stability of Zirconium Tungstate
Co-Amorphous Telmisartan-Pimelic Acid with Improved Solubility
Effect of the Addition of Short Carbon Fiber on Thermal Insulation Properties of ZrB2- SiC Hot-Pressed Ceramics
Effect of Additive Glycerol on Piezoelectric Properties of Modified Sol-Gel (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 Ceramics
Application Perspective of Environmentally Responsive Materials in the Downhole Operation
Preparation of Nanocrystalline Fe2O3 Powder by Cryomilling with Liquid Nitrogen and its Magnetic Property
Cobalt Element Doping for Biomedical Use: A Review
Development of Ferromagnetic Sputtering Targets with High Performance
Numerical Simulation of Ti-Based Metallic Glasses as Whipple Shield Bumper by Smoothed Particle Hydrodynamics Methods
Effect of Nano Sodium Titanate/ Potassium Titanate Whisker on Tribology Behavior of Brake Materials
Preparation and Formation Mechanism of High-Energy Ball-Milled Sn4P3
Effect of Ruthenium on Microstructure and Properties of WC- (W, Ti, Ta) C-Co Cemented Carbide
Integrated Computation and Preparation Optimization of In Situ Ordered Porous Aluminum Filled Tubes
Quasi-Static Axial Compression Behavior and Energy Absorption Evaluation of Steel Foam-Filled Tubes
Preparation and Characterization of High Mobility Nb-Doped SnO2 Transparent Conducting Films
Effect of Amount of Nb/Ti Co-Doping on the Microstructure and Electrochemical Performance of SrCoO3-δ-Based Perovskite
Lotus Leaf Derived Natural Dye as Sensitizer and Biochar as Counter Electrode for Dye-Sensitized Solar Cells
Effect of Hydrothermal Conditions on Crystal Structure, Morphology and Visible-Light Driven Photocatalysis of WO3 Nanostructures
Effects of Co Doping on the Thermoelectric Properties of Cu3SbSe4 at Moderate Temperature
The Effect of Stretching on UHWMPE Microporous Film by Thermally Induced Phase Separation Method
Improved Sublimation Resistance of Skutterudites by Silane Modified Ceramic-Based Coating
Preparation and Numerical Simulation of Heat Transfer Performance for Methyl Palmitate-Methyl Stearate Binary Eutectic Mixture/Expanded Graphite Composite Phase Change Material
Preparation and Characterization of Low Dielectric Constant Films Using Silicon Sources
Green Synthesis of Tungsten Ditelluride and the Magnetoresistance Property
Chapter 5: Computational Procedures in Materials Science
Microscopic Properties of Point Defect and its Cluster in Delta-Phase Plutonium: A Molecular Dynamics Study
Effect of Grain Boundary Energy in Recrystallization Simulation by Phase Field Method
Computational Studies of the Synthesis of Decaborane with Olefins
Phase Field Study of Second Phase Particles-Pinning on Strain Induced Grain Boundary Migration
Numerical Simulation of Ni-Cu Alloy Dendrite Growth with Boundary Heat Flux
Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Si and Al-Cu-Fe-Mg-Si Multicomponent Systems on Al-Rich Side
Steady-State Dynamic Phase Diagram Calculation of U-Ti and U-V Binary System under Irradiation
Using ProCAST to Study the Effects of SEED Process Parameters on the Radial Temperature Distribution in Semi-Solid Slugs
Cascades Damage in γ-Iron from Molecular Dynamics Simulations
First-Principles Study of Structural, Mechanical, and Thermodynamic Properties of Refractory Metals (Rh, Ir, W, Ta, Nb, Mo, Re, and Os)
Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Mg, Al-Cu-Mg-Si, and Al-Fe-Mg-Si Quaternary Systems on Al-Rich Corner
Thermodynamic Study of Equilibrium Phase in Quasicrystalline Strengthened Magnesium Alloys
Kinetic and Strength Calculation of Age-Hardening Phases in Heat-Resistant Aluminum Alloys with Silver
Development of Interatomic Potentials for FCC Metals Based on Lattice Inversion Method
Chapter 6: Functional Coatings, Surface Treatment, Corrosion Behavior and Failure Analysis of Structural Materials
Bending Strength and Cutting Performance of WB-Coated-Diamond/Fe-Ni Composites
Corrosion Resistance of Nickel-Based Composite Coatings Reinforced by Spherical Tungsten Carbide
Corrosion Behavior of Cobalt Alloy Coating in NaCl Solution
Erosion Behavior of PS-PVD Thermal Barrier Coatings and the Effect of Composite Coating (PS-PVD + APS) Thickness
Surface Control of K9 Glass/Diamondunder Cold Plasma Assisted Cutting
Corrosion Resistance of Zinc Phosphate Conversion Coatings on AZ91D Surface
Failure Analysis on Friction and Wear of Tool Joints
Effect of Nickel Plating on MoS2 on Friction and Wear Properties of Cu-MoS2 Composites
Effect of Graphene Content on Composition and Corrosion Resistance of Co-Ni-Graphene Composite Coating
Research Progress on Anti-Corrosive Properties of Graphene Modified Coatings
AlCoCuFeNi High-Entropy Alloy Coating Fabricated by Laser Cladding with Gas-Atomized Pre-Alloy Powders
Threaded Failure Analysis for Three-Dimensional Horizontal Wells Casing
Leakage Failure Analysis of 80SS Tubing in Gas Field
Corrosion Behavior for Casing in Producing Well with Water Injection Technology during Long-Term Service
Analysis of Weld Cracking in a Low-Pressure Steam Pipe
Experimental Study on Flow-Induced Corrosion of Casing and Tubing Steel for Heavy Oil Thermal Recovery Wells
Casing Bearing Capacity with Shear Load for Shale Gas Wells
Simulation of Gas-Liquid Two-Phase Flow-Induced Corrosion at Premium Connection in High Productivity Gas Wells Containing CO2
Challenge and Review of Hydrogen Sulfide Corrosion Resistance Steels for Oil Country Tubular Goods
Test Analysis of Corrosion Perforation in a Crude Oil Gathering Pipeline
Analysis of Corrosion Causes in the Export of a Compressor in the Pipeline of Western China
Leakage Failure Analysis of the ERW Steel Pipeline
Development Direction of Pipeline Corrosion Research on Oil Refining and Chemical Enterprises
Fracture Failure Analysis of Φ50.8mm Coiled Tubing
Analysis of Corrosion Behavior on External Surface of 110S Tubing
Fracture Failure Analysis of C110 Oil Tube in a Western Oil Field
Experimental Study on Corrosion of Multi-Component Thermal Fluid Thermal Recovery well Tube String
Failure Analysis and Solution to Bimetallic Lined Pipe
External Stress Corrosion Cracking Risk Factors of High Grade Pipeline Steel
Failure Cases Analysis in Aerospace Field
Surface Galling Mechanism Analysis of Rotary Shouldered Thread Connection
Failure Analysis and Service Life Prediction of 80SH Casing Steel under Thermal Cycle Service Environment
Chapter 7: Properties of Oil Well Cements and Advanced Building Materials
Effects of Compressive Stress on Carbonation-Induced Degradation of Oil Well Cement under CO2 Storage Environment
Function Synergy of a New Type of Fluid Loss Additive Formula for Comprehensive Performance of Oil Well Cement
Sealing Analysis of Cement Plug in Offshore Abandoned Wells
Performance Evaluation of Polycarboxylic Acid Dispersant for Oil Well Cementing
Salt-Tolerance Performance of Oil Well Cement Fluid Loss Additive SSS/HAM/IA
Mechanical Properties and Microstructure of Slag Solidified Body
Effect of FCC Slurry on Performance of SBS Modified Bitumen
Synthesis and Application Performances of Solid Polycarboxylate Superplasticizers Using Different Initiators
Performance Evaluation of Anti-Ultraviolet Ageing Bitumen with Combined Modification Based on Dynamic Rheological Test
Effect of Pore Structure and Ion Concentration of Solution on the Formation of Ettringite in Composite Cement Paste
Chapter 8: Materials, Technologies and Assessment Methods in Environmental Engineering and Waste Recycling
One-Step Synthesis of Visible-Responsive Diatomite/g-C3N4 Composite and its Catalytic Degradation for Cr(VI)
Effect of Cement Raw Meal on the NO Reduction by Biomass Char
Effect of Dimethyl Sulfoxide in Hydrophobic Modification of Cotton Filter Cloth by ARGET-ATRP Mechanism
Life Cycle Assessment of Green Production of Glass Substrate
Preparation of Alginate Polymer Gel Pellets and its Adsorption on Acid Dyes
Preparation of CTS/MFA Composite and its Adsorption Property of Direct Dyes
Removal of Metal Impurities from the Spent Hydroprocessing Catalyst and Acid Leaching Kinetics of Aluminum
Preparation of Hydrated Calcium Silicate Gel and its Adsorption Properties for Cu(II)
Effect of Silica-Alumina Ratio of Catalysts on NO Decomposition Rate in Cement Kiln Exhaust
Environmental Impacts Assessment of NCM Cathode Material Production of Power Lithium-Ion Batteries
Analysis of Water Consumption Intensity for Steel Production in China
Comparative Life Cycle Assessment between Ordinary Gypsum Plasterboard and Functional Phase-Change Gypsum Plasterboard
Technical Specification Development for Ceramic Tile Type III Environmental Declarations
Life Cycle Assessment of Comprehensive Utilization of Calcium Carbide Slag in Cement Kiln
One-Step Hydrothermal Synthesis of 1T@2H MoS2 for Enhanced Photocatalytic Degradation Performance of Methyl Blue
Determination of Antimony in Recycled Polyester Fiber by ICP-OES with Different Pretreatment Methods
Determination of Volatile Organic Compounds in Recycled Polyethylene Terephthalate Fibers by HS-GC-FID to Evaluate the Efficiency of Testing Conditions
Quantitative Analysis on Green Product Index of Sanitary Wares
Environmental Analysis on Co-Processing of Domestic Waste in Cement Kiln
Recent Developments on Life Cycle Assessment of Building Materials
Carbon Emissions Analysis of Rock Wool Board Products