Symposium on Materials Science and Engineering

Preface
Chapter 1: Building Materials
Mechanical Properties of Hybrid Basalt-Polyvinyl Alcohol (PVA) Fiber Reinforced Concrete
Influence of Metakaolin, Fly Ash and Nano Silica on Mechanical and Durability Properties of Concrete
Mechanical Behavior of Stabilizing Materials Using Silicate Mineral Powder
A Study on the Optimum Material Mix Design for Vegetation Shotcrete Using Mineral Additive
Research of Thermal Stability and Fire-Resistance Properties of the Composite Material “Water Glass-Graphite Microparticles”
Discussion of Mix Proportions of Concrete for Long-Distance Pumping
Study on Microstructure of Long-Age Concrete with HCSA Expansive Agent
Simulation of Mechanical Properties of Light-Burned Magnesium Oxide-Containing Concrete for Historical Dam Temperatures
Cracking Tendency of Self-Compacting Concrete Containing Crumb Rubber as Fine Aggregate
Investigation of Deformation of Rock Samples
Acoustic Properties of Cork Sheets
Effect of Curing Pressure on Compression and Consolidation Behaviors of Cement Admixed Clay
The Reinforcement of Graphene Produced by Kitchen Blender in Cement Mortar
Determining Method for Mixing and Compaction Temperature of Modified Asphalt Mixture
Effects of Curing Time on Micro Properties of High-Volume Fly Ash Concrete with HCSA Expansive Agent
Detection of Crack Evolution in Plain Concrete by Electronic Speckle Pattern Interferometry
Pavement Evaluation for ERS Steel Deck Pavement Using Accelerated Loading Test
Effect of Type of Cement and Expansive Agent on the Hardening of Steam-Cured Concrete
Evaluation on the Addition of Inhibitor and Surface Treatment to Corrosion Behavior of the Reinforced Steel Bar Embedded in Mortar Specimen
Effect of Charcoal Ash Coconut Shell from Waste Material at Different Size on the Physical Properties of Bitumen
Influence of Hydrothermal Nanosilica on Mechanical Properties of Plain Concrete
Effect of Partial Replacement of Fly Ash by Metakaolin on Strength Development of Fly Ash Based Geopolymer Mortar
Validation of the Splitting Tensile Strength Formula for Concrete Containing Blast Furnace Slag
Predicting Compressive Strength of Sustainable Self-Consolidating Concrete Using Random Forest
Experiments and Optimization of Mix Proportions for Cement Paste Backfill Materials with Extra-Fine Unclassified Tailings
Numerical Study of Fracture Process on Full-Scale Concrete Foundations by Means of Controlled Blast Method Utilizing Galvanized Steel Charge Holders
Transient Analysis on Reflective Crack of Highway Semi-Rigid Pavement Caused by Temperature Change
Research on Similar Materials for Rheological Test of Hard Rock Mass
Simulation Analysis of Chemically Bonded Anchors in ABAQUS
Materials Structure Temperature Fissure Analysis of Reinforced Concrete Structure
Mix Design Method of the SMC Cold Temperature Modified Asphalt Mixture
Study and Application on Cold Blended Epoxy Asphalt Mixture for Steel Bridge Deck Pavement
Concrete as a Sustainable Construction Material
Thermal Performance Optimization of Shape Stabilized Phase Change Material Used in Building Envelopes
Evaluation of Field Applicability of Cast-in-Place Piles Using Surfactant Grout
Chapter 2: Metals, Alloys and Processing Technologies
Corrosion Behaviors for Galvanizing, Galvalume and Chromate Treated Steels in 1% NaOH Solution
Influence of Nanosecond Laser Processing Parameters on the Titanium Alloy Surfaces Colorization
Mechanical Clinching of Titanium and Aluminum-Lithium Sheet Materials
Impact of Weld Locations of TWBs of Different Thickness Ratios on Dissimilar Steels on its Bulging Formability
Optimization of Co-Injection Desulfurization of Vanadium Bearing Hot Metal
Laser Direct-Part Marking of Data Matrix Barcodes on the Surface of Metal Alloy Material
Evaluation on the Mechanical and Corrosion Resistance of ALDC 12 Al Alloy by Three Types of Heat Treatments
Evaluation of Uniaxial Tensile Behavior under Pulsed Current for Electrically Assisted Warm Forming of Light Weight Alloys
Fatigue Life Evaluation of Weld Surfacing LB 52 Grade
Preliminary Study of Testing Specimen Thickness Effect on Fracture Toughness for X70 Steel
Research on Laser-Hybrid Cladding of Ni-Cr Alloy on Copper
Chapter 3: Composite Materials
Composite Sandwich with Aluminum Foam Core and Adhesive Bonded Carbon Fiber Reinforced Thermoplastic Cover Layer
Characterization of Snap-On Calf Nipple Product and Development of its Compound Formulation Based on Natural Rubber
An Amended 8-Chain Model for Rubber-Like Materials
Effect of Oleic Acid on Properties of Natural Rubber Filled Bacterial Cellulose
Influence of Accelerator/Sulfur Ratio on Mechanical Properties and Thermal Resistance of Natural Rubber Containing Hybrid Fillers
Comparative Analysis of Crashworthiness Capability of Laminate Tubes Structure with 0° Plies of Unidirectinally Arrayed Chopped Strand
High-Performance Fiber Reinforced Polymer/Metal-Hybrids for Structural Lightweight Design
Cutting Deformation Mechanisms of Square Aluminium/CFRP Tubes
Combined Injection Molding Technology for Dynamically Stressed Multi-Material Coupling Elements
Burr Height as Quality Indicator in Single Shot Drilling of Stacked CFRP/Aluminium Composite
Structural Health Monitoring System of Composite Beams with Surface Bonded and Embedded Fibre Bragg Grating Sensors
Chapter 4: Functional Thin Films, Membranes and Coatings
New Application of Chitosan Film as a Water Vapor Cell
Film Elasticity and Film Stabilization in Firefighting Foam Stabilized by Solid Particles
Features of Polarization Processes in Thin Films Poly(Diphenylene Phthalide)
Manganese Oxide/Single-Walls Carbon Nanotubes Electrodeposited Films for Supercapacitors
Fabrication of Chitosan-Polyethylene Oxide Polymeric Thin Film Using Electrochemical Deposition for Detection of Volatile Organic Compounds
Effect of Alkali Treatment on the Mechanical Property of Polyimide Film
Preparation of Alumina Hollow Fiber Membrane with Controlled Pore Structure for Contactor Process
Study on Surface Tension of Membrane Made in Cellulose Diacetate
Study on Corrosion Process of Al-Mg Coatings Based on Electrochemical Impedance Spectroscopy
Chapter 5: Glasses and Functional Ceramics
Hardness and Structural Properties of Yb3+ Doped B2O3-ZnO-TiO2 Glasses
Synthesis and X-Ray Analysis of Complex Ferrites
Preparation of La0.7Sr0.3Co0.2Fe0.8O3-δ (LSCF 7328) by Combination of Mechanochemical and Solid State Reaction
Centrifugal Processing on Aspheric Mirror Blank of Optical Glass Material
Internal Features of Glass Filled Ruby Samples Probed by EPMA
Chapter 6: Materials and Technologies for Electronics and Optoelectronics
Properties of Na0.5Bi0.5TiO3-SrTiO3 Ferroelectric Thin Films Prepared by a Modified MOSD Process
Design and Simulation of Top Illuminated InGaAs PIN Photodetector for Millimeter-Wave Applications
A Low Pass Filter Based on Spoof Surface Plasma Polaritons
Facile Formation of Interconnected Multi-Walled Carbon Nanotube-Graphene Nanocomposite for Nanoelectronics Applications
Chapter 7: Applied Nanotechnologies and Nanomaterials
Synthesis and Physico-Chemical Properties of Zinc Layered Hydroxide-3-4-Dichlorohenoxy Acetic Acid (ZLH34D) Nanocomposite
Dominant Formation of the Carbon Nanocoils at Low Temperature
Preparation and Properties of Cupper and Iron Doped TiO2 Nanotubes by Anodization Method
Preparation of High-Quality Graphene by Sodium Borohydride Reducing Stage-1 FeCl3-GIC via In Situ Hydrogen Exfoliation
Development of Transparent Electrodes Using Graphene Nano-Ink and Post-Consumer PET Bottles for Electrochromic Application
Studying the Temperature Effect on the Magnetic Behavior of Fe3O4 Water Based Ferrofluid
Chapter 8: Biomaterials
Preparation and Characterization of a Novel Rice Paste for Bone Hemostatic Biomaterial

In Vivo Clinical Trial of Porous Starch-Hydroxyapatite Composite Biomaterials for Bone Regeneration
Characterization of Hydroxyapatite from Chicken Bone via Precipitation
Chapter 9: Technologies of Chemical Engineering
Supercritical Hydrothermal Synthesis of Ultra-Fine Copper Particles Using Different Precursors
Synthesis and Performance Study of the Nanomaterial Used to Stabilize the Reversible Invert Emulsion Drilling Fluid
Preparation of KI-Impregnated Razor Clam Shell as a Catalyst and its Application in Biodiesel Production from Jatropha curcas Oil
Study on Palm Oil and Treated Waste Vegetable Oil Impregnated Paper
Chapter 10: Materials and Technologies of Environmental Engineering
Treatment of V2O5/TiO2 by Non-Thermal Plasma: Changes in Surface Characters and Mercury Oxidation Activity
Improving the Sweeping Efficiency of Amendment by Using Polymer
The Combination of Na2EDTA and Reducing Organic Acid on Remediation of Soil Contaminated by Heavy Metals
Research on Foam’s Carrying Capacity of Two Types of nZVI
Microalgae Biomass Recovery Grown in Wet Market Wastewater via Flocculation Method Using Moringa oleifera
Experimental Assessment on Effects of Growth Rates Microalgae Scenedesmus sp. in Different Conditions of pH, Temperature, Light Intensity and Photoperiod