Advanced Engineering Technology II

Preface, Committee
Chapter 1: Nanomaterials, Nanotechnologies and Semiconductors
Silica Rice Husk Supported Ag/ZnO Nanoparticles for an Improved Visible-Light Photocatalytic of Methylene Blue
Borosilicate Frit Addition Impact on the Structure and Electric Behavior of ZnO Nanoparticle-Based Varistors
Plugging Agent of Shale Base on Nano Flexible Polymer
Dielectric Study of Electron Capture Centers in Sillenite Crystals Bi12SiO20
Self-Cleaning and Antibacterial Properties of Paint Containing ZnO and WO3 Co-Doped VO2 Thermochromic Nano-Pigment
Synthesis of h-MoO3 and (NH4)2Mo4O13 Using Precipitation Method at Various pH Values and their Photochromic Properties
The Effects of Bagasse Fiber Loading on the Mechanical Properties of Skim NR–Clay Nanocomposites
UV-Blocking Property of Nano-ZnO Thin Film Coating on Silk Fabric
Chapter 2: Biomedical Engineering and Biotechnologies
Choosing the Right Antioxidant Supplement for Protecting Liver from Toxicity of Engineered Nanoparticles : A Comprehensive In Vitro Screening
Fabrication of Ascorbic Acid Biosensor Based on Coupling Polyethylene Glycol Modified Silk Fibroin Membrane onto Glassy Carbon Electrode
Biocompatible Cardiac Sensor with Continuous Arrhythmia Monitoring for Human Wellness
Low Temperature Preparation of Thiocarbamide Doped TiO2 Film on Stainless Steel and its Antibacterial Efficiency against Staphylococcus aureus
Boron Compounds Counteracts Oxidative Stress Mediated Genotoxicity Induced by Fe3O4 Nanoparticles In Vitro
Influence of the Veneering Thickness on Stresses in All-Ceramic Crowns
Biomechanical Behavior of All-Ceramic Crowns with Variable Thicknesses of Zirconia Frameworks
Technology Optimization on Preparation of Peanut Antioxidant Peptides by Bacillus Subtilis Solid State Fermentation Method
Binding Affinity Analysis of Aptamer Targeted to Live Bacterial Cells
Chapter 3: Applied Electrochemistry
Electrochemical Investigation of the Effects of Acid Concentration and Dissolved Oxygen on the Corrosion Behavior of Austenitic Low-Nickel Stainless Steels in Citric Acid
Effects of Organic Additives on Electrochemical Properties of SiOx Electrodes in Lithium Secondary Batteries
Electrochemical Properties of NbO as a Negative Electrode Material for Lithium Secondary Batteries
Comparative Study of the Corrosion Behavior of Low-Nickel AISI 202 and Conventional AISI 304 Stainless Steels in Citric Acid Using Electrochemical Techniques
Chapter 4: Materials and Processing Technologies in Mechanical Engineering
Preliminary Study of Ultrasonic Assisted Underwater Laser Micromachining of Silicon
Bubble Formation in the Underwater Laser Ablation of Silicon
Tool’s Edges Fragmentation at Gear Hobs – A Method to Reduce Cutting Vibrations
Recovery of Aluminum Alloy A380 from Machining Chips
Effect of Activating Flux on the A356 and 6061 Aluminum Alloy GMA Welds
Effects of Root Opening on Physical and Mechanical Properties of the Double Side Welded of Ship Materials
Porosity Defects Induced by Semi-Solid Isothermal Heat Treatment in Cast Hypereutectic Al-18% Si Alloy
Modification Behavior and Microstructure Evolution during Solution Heat Treatment of A356 Alloys with Al2Ca and Excess Mg
Influence of Alloying Elements in ZnAl5 Based Alloys on Melting Temperature, Tensile Strength and Vickers Hardness
Tensile Properties and Microstructure of Friction Stir Welded Joints 2195-T8 Aluminum Alloy
Primary Radiation Damage of BCC Iron under Uniaxial and Hydrostatic Stress: MD Simulation
Improvement in Plastic Strain Ratio of AA1050 Al Alloy Sheet by Enhancing the <111>//ND Texture Component
Influence of Friction Stir Welding Parameters on the Mechanical Properties of EN AW-7075 Weld Joints
Effects of Strain-Rate and Deformation Mode on Strain-Induced Martensite Transformation of AISI 304L Steel Sheet
Effects of Cu Addition on the Precipitation Process of Al-9Zn-4Mg-xCu (wt. %) Alloys at 130°C
Experimental Analysis of Forming Limits and Thickness Strains of DP600-800 Steels
Modeling and Optimization for Multiple Criteria of Hole Quality in Hardened Steel Drilling
Modeling of Cut Depth and Surface Analyses of Silicon Wafer in Laser Micromachining Process
Resistance Spot Welding Process Optimization Using Taguchi Robust Method for Joining Dissimilar Material
An Analysis on Finding the Optimum Die Angle of Polylactic Acid in Fused Deposition Modelling
Calorimetric and Thermodynamic Studies of Complex Ferrites
Chapter 5: Chemical Materials and Chemical Technologies
Effect of Cationization Conditions on Dyeing Properties of Hemp Fabric with Natural Dye Extracted from Arabica Coffee Ground
Crystallinity, Tapping and Bulk Density of Microcrystalline Cellulose (MCC) Isolated from Rice Husk (RH)
Phase Morphology, Mechanical and Thermal Properties of Poly (Trimethylene Terephthalate) and Poly (Ethylene Terephthalate) Blends
Morphology and Mechanical Properties of Poly (Lactic Acid) and Acrylonitrile-Butadiene Rubber Blends with Organoclay
Fabrication and Characterization of Porous Activated Carbon from Coconut Shell by Using Microwave-Induced KOH Activation Technique
Isoconversional Methods for Kinetic Modeling of Kerogen Pyrolysis Using TG Data
First Principles Density Functional Theory Investigation on the Structural, Energetic and Electronic Properties of 6–Bromo–4–Oxo–4H–Chromene–3–Carbaldehyde
Detailed Modelling of Hydrocarbonaceous Media Separation Process
Chapter 6: Technologies of Environmental Engineering, Health and Safety and Waste Utilization
Xylol and Glutaraldehyde Replacement at a University Hospital and a Laboratory of Human Anatomy
Natural Materials to Absorb Water from Environment
The Establishment of Real-Time PCR Detection System of Aspergillus Niger in Peanut
The Anti-Aspergillus Flavus Activity of Composite Coating Using Lemon Aldehyde and Chitosan
Copper Removal with Biologcal Treatment Aided with Modified Adsorbents
Preparation and Metal Removal from Chitosan/PEG Blend
Multi-Cycle Photodegradation of Anionic and Cationic Dyes by New TiO2/DSAT Immobilization System
Enhanced Photocatalytic Degradation of Fulvic Acid Using N–Doped SnO2/TiO2 Thin Film Coated Glass Fibers under UV and Solar Light Irradiation for Drinking Water Purification
The Effect of Reactive Red 4 Dye as a Sensitizer in Enhancing Photocatalytic Activity of TiO2 for Degradation of Methyl Orange
Nitrogen Doped TiO2 Prepared under Microwave Irradiation: Effect of Different Irradiation Light
Sorption of Copper and Zinc from Aqueous Solutions by Microwave Incinerated Sugarcane Bagasse Ash (MISCBA)
Computational Fluid Dynamics Modelling of Photoelectrocatalytic Reactors for the Degradation of Formic Acid
Chapter 7: Architecture, Building Materials and Construction Technologies
Ageing Documentation of Hydrophilic Mineral Wool Used in Green Roof Assemblies
Optimum Blend Ratio of Tropical Soil and Porcelain Tile Residue to Highway Applications Based on Statistical Analysis of the Results of Unconfined Compression Tests
A Study on Indoor Thermal Improvement of Container for Low Income Housing in Jakarta
Thermal Performance Comparison between Single and Double Storey Terrace Houses in Melaka, Malaysia
Study on Green Vertical Housing Using Hybrid Ventilation System Based on Air Changes per Hour Factor
The Virtualisation Process of the Joglo Cultural Heritage House Using Computer Aided Design
Experimental Evaluation of Residual Stresses in the Concrete
Soil Stresses on Carbon Steel Pipe Undergoing Uplift
Experimental Assessment of the Influence of Wind Speed on the Airflow and Temperatures in the Open Joint Ventilated Façade Cavity
Effect of Aggregate Size on Punching Strength of Reinforced Concrete Slabs
Comparing the Effectiveness of Friction Damper and Tuned Mass Damper Using Numerical Simulation
Research on Seismic Performance of Framed Shear Wall Structure
Economic Comparison of Fire Fighting Measures of Gypsum-Based Materials
Thermal Technical Failures of Critical Construction Details
Pavement Design Reinforced Base Researches
Calculation of the Pavement Reinforced Design Using Model of Multilayered Plate on the Elastic Base
The Future of Architecture in Modular Construction
Influence of the Type of the Fiber Component of the Stabilizing Additive for Stone Mastic Asphalt Concrete on the Structure of an Organic Binder
Evaluation of Measurement in Crawl Space of Wooden House
Dynamic Collapse Analysis of Single-Layer Lattice Domes with Supporting Frames
The Variational Principles of Coupled Systems in Fatigue Problem Undergoing Large Range Damage
Increasing Productivity in Stair Construction Using EPS Technology as an Alternative Material
Influence of Freezing-Thawing on Shear Strength of Frozen Soil in Northeast China
The Effect of Filler Based on Calcium Silicates оn Strength of Lime Composites
Study on Tensile Creep Characteristics of High Strength Concrete
Heat Capacity Measurements of Loose Materials with Respect to Long Heat Accumulation
Thermal Analysis Application in Study of Alkali-Activated Blast Furnace Slag
Analysis of the Settlement of Roadbed-Culvert Transitional Section in the High Salinity Regions
Analysis of the Culvert Foundation Settlement under Different Construction Methods in High Salinity Regions
Study on Continuum Damage Mechanics Model for High Cycle Fatigue
Distribution of Displacements in Elastic Layer
Analysis of Predictive Calculation Methods of Airborne Sound Insulation
Calculation of an Anisotropic Hemispherical Shell with Inhomogeneous in the Meridian Direction
Non-Linear Behavior of Spherical Shells under Static Ring Loads
Chapter 8: Research and Design in Area of General Mechanical Engineering
Elastohydrodynamic Lubrication in Ball Thrust Bearing
Semiautomatic High Frequency Ultrasonic Testing System for Welded Plastic Pipes
Optimization Design and Structure Design of Precision CNC Machine
Parametric Study of Influence of Assembly and Design on the Center of Gravity of Public Buses
Research and Application of a Novel Cluster Well Pumping Unit
Development of Ultrasonic Surface Treatment Device
Simulation and Experimental Study of a Scintillation Fiber Detector of the Activities of 63Ni-, 89Sr- and 90Sr-Based Radiation Sources
Multi-Condition Analysis and Optimization of Sprayer Frame
Simulation on Safety Property of Inner Support in Tire
Design of an Improved Nonlinear Disc Spring Vibration Isolator
Dynamic Behavior of Cellular Materials under Combined Shear-Compression
Energy Model of Pulse Continuously Variable Transmission
Finite Element Analysis Using Free Mesh Method
The Research on the Design of Colors, Patterns and Texts for Paper Stocks Tea Packaging Visual Design
Chapter 9: Mechatronics, Control and Robotics
A High Accuracy Speed Control of DC Motor Using Adaptive Torque Compensation on Lyapunov Stability with Kalman Filter
Design of Sliding Mode Based Differential Flatness Control of Leg-Wheel Hybrid Robot
Research on Integrated Shift Control Strategy for Automatic Transmission
Yaw Angle Measuring System of Omni-Directional Mobile Robot Based on EKF
Development of Parallel Delta Robot System Controller Based on Raspberry Pi and FPGA
Techniques for the Modelling and Control of Cutting Tools by the Use of 3D Scanners and CAD Programmes
Research and Implementation of Real-Time Computing Algorithm of S Curve Acceleration and Deceleration for Step Motor
Modeling and Control of a Haptic Lever to Regulate the Speed in Maritime Vehicles
The Foams and Emulsions Ontology Model
Chapter 10: Engineering Practice in Renewable Energy Sector
Recent Trend of Solar Tracking System for Electric Power Conversion
Effect of Shielding Object to the Specific Heat Demand for Heating of a House
Experimental Study on the Wet Electrostatic Precipitator for Purifying Biomass Fuel Gas
Wind Potential Assessment for the Utilization from Wind Energy in the Household Level: A Case Study of Nakhonratchasima Thailand
Investment Profitability Analysis for Wind Power Project in Taiwan
Chapter 11: Traffic and Transportation Systems
Urban Rail Transit Types and Single Wire on the Propagation Law of Delays
Effect of Platform Screen Door on Platform of Urban Rail Transit Passenger Crowding Analysis
Passenger Safety Assessment in Urban Rail Transit Station Based on Systematic Dynamics
Dimension Determination of Highway Guardrail Based on Safety Collision with Vehicle
WiDRIVE Safety Innovation: Wireless Device for Regulation and Information on Vehicular Events
A Method to Evaluate Vehicle Impact Speeds in Passenger Car-Pedestrian Accidents
Chapter 12: Engineering Solutions in Area of Education
Logatomic Tests as a Method of Evaluation of Speech Intelligibility in High Resolution
A Comparative Analysis of the Frequency Spectrum of Speech in Logatomic Tests and Measurement Signals
The Concept of Electrical Part of the Model of Micro‑Energy Sources for Electrical Laboratories
The Concept of Mechanical Part of the Model Micro-Energy Sources for Electrical Laboratories
An Instructional Assistant Collaboration Server System Based on Cloud Platform
Chapter 13: Industrial Engineering and Management
Effective Methodology of Linking Enterprise Architect with Application Framework and Solutions in Business Practice
The Research of Compose Method for Removal/Install Part in Aircraft Maintenance Manual
Improvement of Administration Processes in Manufacturing Companies
Petri Net Simulator for Small-Medium Enterprises’ Business Process Management in a Network Business Environment
A Hybrid Differential Evolution Algorithm Based on Dynamic Variable Neighborhood Search for Permutation Flowshop Scheduling Problem
Performance Studies on Differential Evolution Algorithm and Shuffled Frog-Leaping Algorithm for Simulated Manufacturing Problems
Comparison of Bee Algorithm and Scheduling Methodologies: A Case Study of Manufacturing in Thailand