Timing

Buch | Hardcover
294 Seiten
2004
Springer-Verlag New York Inc.
978-1-4020-7671-8 (ISBN)

Lese- und Medienproben

Timing - Sachin Sapatnekar
192,59 inkl. MwSt
Statistical timing analysis is an area of growing importance in nanometer te- nologies‚ as the uncertainties associated with process and environmental var- tions increase‚ and this chapter has captured some of the major efforts in this area. This remains a very active field of research‚ and there is likely to be a great deal of new research to be found in conferences and journals after this book is published. In addition to the statistical analysis of combinational circuits‚ a good deal of work has been carried out in analyzing the effect of variations on clock skew. Although we will not treat this subject in this book‚ the reader is referred to [LNPS00‚ HN01‚ JH01‚ ABZ03a] for details. 7 TIMING ANALYSIS FOR SEQUENTIAL CIRCUITS 7.1 INTRODUCTION A general sequential circuit is a network of computational nodes (gates) and memory elements (registers). The computational nodes may be conceptualized as being clustered together in an acyclic network of gates that forms a c- binational logic circuit. A cyclic path in the direction of signal propagation 1 is permitted in the sequential circuit only if it contains at least one register . In general, it is possible to represent any sequential circuit in terms of the schematic shown in Figure 7.1, which has I inputs, O outputs and M registers. The registers outputs feed into the combinational logic which, in turn, feeds the register inputs. Thus, the combinational logic has I + M inputs and O + M outputs.

Preduction/Introface.- A Quick Overview of Circuit Simulation.- Frequency-Domain Analysis of Linear Systems.- Timing Analysis for a Combinational Stage.- Timing Analysis for Combinational Circuits.- Statistical Static Timing Analysis.- Timing Analysis for Sequential Circuits.- Transistor-Level Combinational Timing Optimization.- Clocking and Clock Skew Optimization.- Retiming.- Conclusion.

Erscheint lt. Verlag 2.6.2004
Zusatzinfo XII, 294 p.
Verlagsort New York, NY
Sprache englisch
Maße 155 x 235 mm
Themenwelt Informatik Weitere Themen CAD-Programme
Technik Elektrotechnik / Energietechnik
Technik Maschinenbau
ISBN-10 1-4020-7671-1 / 1402076711
ISBN-13 978-1-4020-7671-8 / 9781402076718
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
Band 1: Produktion

von Thomas Bauernhansl

Buch | Hardcover (2024)
Springer Vieweg (Verlag)
99,99
Einführung in die Geometrische Produktspezifikation

von Daniel Brabec; Ludwig Reißler; Andreas Stenzel

Buch | Softcover (2023)
Europa-Lehrmittel (Verlag)
20,70