F. Pacheco-Torgal,     University of Minho, Portugal

Abstract:

This chapter provides a brief overview of some important aspects of nanotechnology starting with its earlier steps and how countries are trying to establish an advantageous position in this field. China deserves a special mention because it is already the second largest producer of nanotechnology papers after the United States. The need for nanotechnology in the construction sector is emphasized. An outline of the book is given.

Key words

nanotechnology

eco-efficient construction

UN Millennium Goal

concrete

energy efficiency

1.1 Introduction

Nanotechnology is a hot topic in current research, defined by Drexler (1981) as the manufacture of products using dimensions and precision of between 0.1 and 100 nm (1 nm = 1 × 10–9 m). It should be noted, however, that two decades prior to Drexler’s work, the physicist Richard Feynman made a speech entitled ‘There’s plenty of room at the bottom’ at a 1959 meeting of the American Physical Society at Caltech; this is considered to be the beginning of the era of nanotechnology era (Feynman, 1960).

In 1981 an expert group appointed by the European Commission was not able to agree on a firm definition of nanotechnology, but did arrive at a working definition for nanoscience and nanotechnology (NST) as ‘the manipulation, precision placement, measurement, modeling or manufacture of sub-100 nanometer scale matter’ (Glänzel et al., 2003). The rapid evolution of research in this area is demonstrated by the growth rate of papers published with the ‘nano-’ prefix in the title in the period between 1992 and 2001, which increased exponentially with a doubling time of 2 years (Glänzel et al., 2003). Economic estimates regarding advances in nanotechnology are still more striking: it is predicted that products and services related to nanotechnology could reach several hundred billion euros by the end of the decade (NSF, 2001; Compañó and Hullmann, 2002).

Dozens of countries already have national strategies in place and have begun to implement national nanotechnology plans (Rieke and Bachmann, 2004; Soltani et al., 2011). According to Arnall and Parr (2005), countries are trying to establish an advantageous position ‘so that when nanotech applications begin to have a significant impact in the world economy, countries are able to exploit these new opportunities to the full’. Europe has assigned 4.865 billion euros to ‘Nanosciences, Nanotechnologies, Materials and New Production Technologies’ as part of the 7th Framework Programme for the 2007–2013 period. In the United States, a dedicated nanotechnology act was signed into law, which set aside 3.679 billion dollars of funding for the 2005–2008 period (Salerno et al., 2008). China has identified nanotechnology as a priority area in its national agenda of science and technology development, and has increased R&D investment in the field. China has consequently emerged as one of the key global players in nanotechnology, producing the second largest number of nanotechnology papers after the United States (Wang and Guan, 2010, 2012).

Of course, nanotechnology is not entirely risk-free, with issues already raised with regard to the potential toxicity of nanoparticles and a new problem of the disposal of nanowastes (Bystrzejewska-Piotrowska et al., 2009; Tyshenko, 2010). Despite these risks, however, Arnall and Parr (2005) quote Mihail Roco, the senior advisor for nanotechnology to the NSF, who stated that ‘early payoffs will come in electronics and IT, and medicine and health’. Malanowski and Zweck (2007) also report that although almost all fields of industry are expected to be affected by nanotechnology by 2015, the areas most affected will be ‘chemistry, life sciences and electronics’.

1.2 The need for nanotechnology in the construction sector

Very few nanotech applications are currently used in the construction sector, which in fact seems to have been somewhat neglected by nanotech research to date. A search for the terms ‘nanotechnology’ and ‘eco-efficient construction’ in journals listed in Scopus revealed only five papers, all related to cement and concrete. Of course, many more papers examining the role of nanotechnology in cement and concrete have been published; however, the number is very low compared to other major areas of current research. Moreover, much more work on standardization is required to ensure that high quality investigations into the use nanotechnology in cement and concrete applications can reach the global market (Sanjuan et al., 2011).

It is understandable that nanotech research in today’s economically driven society has so far been focused mainly on high profit areas such as those mentioned above. It is rather strange, however, that the same society so easily forgets the economics of environmental problems such as the probable meltdown of the world economy associated with global warming (Stern, 2006). Nanotechnology priorities should therefore be driven by ‘higher’ goals; in particular, the 7th UN Millennium Goal related to environmental sustainability should be a major focus of attention. Consequently, the construction industry should also be at the core of the R&D efforts in nanotechnology: as one of the largest and most active sectors in the world, it will continue to grow at a rapid pace over the coming decades, and most importantly, it has a very high environmental impact, being responsible for the depletion of large amounts of non-renewable resources and for carbon dioxide gas emissions.

Concrete is the most widely-used construction material on Earth, currently used at a level of about 10 km3/year (Gartner and Macphee, 2011), compared to 2 km3 for fired clay, 1.3 km3 for timber, and 0.1 km3 for steel (Flatt et al., 2012). These astonishing figures show the importance of concrete in the context of material efficiency (Allwood et al., 2011). The main binder of concrete, Portland cement, is responsible for almost 80% of the total CO2 emissions from concrete, which in turn make up around 6–7% of the planet’s total CO2 emissions (Shi et al., 2011). This is particularly serious in light of current concerns around climate change and, more worryingly still, demand for Portland cement is expected to increase by almost 200% between 2010 and 2050, reaching a level of 6000 million tons/year (Pacheco-Torgal and Jalali, 2011). Nanotech research is therefore crucial in helping to identify methods to make concrete more environmentally friendly.

Another relevant aspect of the high environmental impact of the construction industry relates to the high energy consumption in buildings (accounting for approximately one third of the world’s energy consumption) which is responsible for a significant proportion of global greenhouse gas emissions. In Europe, buildings are responsible for more than 40 percent of energy consumption and greenhouse gas emissions (Lechtenbohmer and Schuring, 2011), and energy efficiency is an issue of crucial importance. The recasting of the Energy Performance of Buildings Directive (EPBD) was adopted by the European Parliament and the Council of the European Union on 19 May 2010. The recast set 2020 as the deadline for all new buildings to be ‘nearly zero energy’; for public buildings, the deadline is even sooner – the end of 2018. Technologies and methods to improve energy efficiency (Clements-Croome, 2011) are therefore required to ensure eco-efficient construction.

1.3 Outline of the book

The key role that nanotechnology has to play in the development of a more eco-friendly type of concrete is the basis for several chapters in the first part of the book, which looks at infrastructural applications (Chapters 2–7). Chapter 2 covers the experimental and theoretical advancements in the field of nanotechnology; these should allow a greater understanding of the nature of concrete, which in turn will create the scientific basis for the development of more eco-efficient concrete. In Chapter 3, the use of nanoparticles to produce concrete with high strength and high durability is discussed, while Chapter 4 looks at the development of self-sensing concrete with nanomaterials. This feature enables the assessment of strain or stress variations in concrete structures. This not only allows savings in terms of structure inspections but also removes the requirements for conservation processes which are rather expensive. Chapter 5 deals with the use of nanotechnology to improve the bulk and surface properties of steel, which is the most widely used metallic alloy in modern industry, for structural applications. In Chapter 6, nanoclay-modified asphalt mixtures are discussed, showing the importance of nanoclay...