Quality Assured Measurement (eBook)

Unification across Social and Physical Sciences

(Autor)

eBook Download: PDF
2019 | 1st ed. 2019
XIII, 241 Seiten
Springer International Publishing (Verlag)
978-3-030-28695-8 (ISBN)

Lese- und Medienproben

Quality Assured Measurement - Leslie Pendrill
Systemvoraussetzungen
139,09 inkl. MwSt
  • Download sofort lieferbar
  • Zahlungsarten anzeigen

This book presents a general and comprehensive framework for the assurance of quality in measurements.  Written by a foremost expert in the field, the text reflects an on-going international effort to extend traditional quality assured measurement, rooted in fundamental physics and the SI, to include non-physical areas such as person-centred care and the social sciences more generally. Chapter by chapter, the book follows the measurement quality assurance loop, based on Deming's work. The author enhances this quality assurance cycle with insights from recent research, including work on the politics and philosophy of metrology, the new SI, quantitative and qualitative scales and entropy, decision risks and uncertainty when addressing human challenges, Man as a Measurement Instrument, and Psychometry and Person-centred care.

Quality Assured Measurement: Unification across Social and Physical Sciences provides students and researchers in physics, chemistry, engineering, medicine and the social sciences with practical guidance on designing, implementing and applying a quality-assured measurement while engaging readers in the most novel and expansive areas of contemporary measurement research. 




Professor Leslie R. Pendrill has for much of his career since the mid 1980's been head of research at the National Metrology Institute of RISE Research Institutes of Sweden.  For decades, his research has focused on fundamental metrology, in particular optoelectronic, laser, length and mass measurement. More recently, he has developed new quality-assured measurement methods in which Man is the main actor, weighing the effects of measurement against the effects of product evaluations, including optimised measurement, uncertainty studies and the measurement of perception.  Professor Pendrill has been actively involved in several international metrology activities including being Chair of the European Association of National Metrology Institutes (EURAMET); the International Union of Pure and Applied Physics' Commission on Symbols, Units, Nomenclature, Atomic Masses and Fundamental Constants; and the ISO/TC12 Quantities and units standards committee. He earned his PhD in Atomic Physics at the University of Reading, England and moved to Sweden after postdoctoral positions in Paris at the École normale supérieure, JILA Research Institute in Boulder CO, and Oxford University. 


Preface 6
Acknowledgements 8
Contents 9
Chapter 1: Measurement Challenge: Specification and Design 14
1.1 Processes of Production and Measurement 15
1.2 Measurement, Assessment, Opinions: From Quantitative Observations to Categorization 16
1.2.1 Major Challenges and Interdisciplinary Studies 17
1.2.2 A Way Forward. Man As a Measurement Instrument 18
1.2.3 Categorical Scales: Logistic Regression 19
1.3 Opening the Quality Assurance Loop 22
1.4 Specification of Measurement Problem: Entity Specifications 23
1.4.1 Entity Specifications 23
1.4.2 Definition of Test Problem, Based on Product Description 25
1.4.3 Structural Models and Specifications of Entity Characteristics 26
1.4.4 Construct System and Structural Modelling: Functional and Non-functional Characteristics 29
1.4.5 Uncertainty and Risks: Link to Final Steps in Quality Loop 31
1.5 Case Study: Fit-for-Purpose Measurement Specification 32
1.5.1 Describe the Product [§E1.1] 32
1.5.2 Product Demands [§E1.2] 33
1.5.3 Definition of Test Problem, Based on Product Description §E1.1 34
Exercise 1: The Product 36
E1.1 Describe the Product 36
E1.2 Product Demands 37
E1.3 Definition of Test of Product, Based on Product Description §E1.1 37
References 38
Chapter 2: Measurement Method/System Development 41
2.1 Design of Experiments 42
2.1.1 Uncertainty and Risks. Fit-for-Purpose Measurement 42
2.1.2 Separating Production and Measurement Errors: Variability 44
2.2 Specification of Demands on a Measurement System 45
2.2.1 Different Variables Entering into Conformity Assessment of an Entity (Product) 46
2.2.2 Metrological Characterisation and Specifications 46
2.2.3 Separating Object and Instrument Attribute Estimation. Measurement System 49
2.2.4 Measurement System Specifications 52
MPE Instrument 52
Capability Factors 53
Limits on Capability Factors 53
2.2.5 Examples of Measurement System Demands, Both Quantitative and Qualitative. Pre-packaged Goods 54
2.3 Choice and Development of a Measurement Method 56
2.3.1 Definition of Test Problem, Based on Test Requirements 57
2.4 Measurement System Analysis (MSA) 57
2.4.1 Measurement Model 57
2.4.2 Static Functional Characteristics of Measurement Systems 58
2.4.3 Measurement System Modelling As a Chain of Elements: Signal Propagation in a Measurement System 60
2.4.4 Performance Metrics of Measurement Systems 61
2.4.5 Restitution 63
2.5 Evaluation and Validation of a Measurement Method 64
2.5.1 Design of Interlaboratory Experiment 64
2.5.2 Analysis of Variance in an ILC 66
2.5.3 Qualitative Accuracy Experiments 67
2.5.4 Applications of Method Accuracy 68
2.6 Verification 68
2.7 Case Studies 69
2.7.1 Practical Working of a Measurement System 69
2.7.2 Man As a Measurement Instrument, Psychometry and Product Function 70
Exercise 2 Definition of Measurement Problem 73
E2.1 Demands on Measurement System and Methods, Based on Product Demands §E1.2: 73
E2.2 Non-functional Characteristics of Appropriate Measurement System, Based in Test Demands §E1.3 & §E2.1:
E2.3 Functional Characteristics of Appropriate Measurement Systems, Based on Test Demands §E1.3 & §E2.1:
References 75
Chapter 3: Ensuring Traceability 78
3.1 Quantity Calculus and Calibration 79
3.1.1 Quantity Concepts 80
3.1.2 Introducing Measurement and Calibration. Separating Object and Instrument. Restitution 82
3.2 Units and Symmetry, Conservation Laws and Minimum Entropy 86
3.2.1 Meaningful Messages and Communicating Measurement Information 87
3.2.2 Units, Words and Invariance 88
3.2.3 Symmetry, Conserved Quantities and Minimum Entropy. Maximum Entropy and Uncertainty 90
3.3 Calibration, Accuracy and True Values 92
3.3.1 Trueness and Calibration Hierarchy 92
3.3.2 Objectivity and Calibration of Instruments in the Social Sciences 93
3.4 Politics and Philosophy of Metrology 94
3.4.1 Objective Measurement in the Physical and Engineering Sciences 94
3.4.2 Politics and Trueness 94
3.4.3 Measurement Comparability in Conformity Assessment 95
3.4.4 Objective Measurement in the Social Sciences 96
3.5 Quantitative and Qualitative Scales 98
3.5.1 Counted Fractions 99
Wishful Thinkers 100
Describers 100
3.5.2 Other Ordinal Scales. Pragmatism 101
3.6 New and Future Measurement Units 102
3.6.1 The Revised SI 102
Clear Definitions 102
Quantum Mechanics and Measurement 104
Boltzmann Constant and Elementary Counting 106
Counts and Quantities of Unit One 107
3.6.2 Human Challenges 108
Measurement Units and the Rasch Model 109
References 110
Chapter 4: Measurement 114
4.1 Performing Measurements 114
4.1.1 Measurement Process 115
4.2 Metrological Confirmation 116
4.2.1 Calibration and Metrological Confirmation. Uncertainty and Unknown Errors 117
Repeatability and Reproducibility 119
Convenience Sampling 119
4.2.2 Evaluating Measurement Uncertainty: Physical Measurements 120
4.3 Accurate Measurement across the Disciplines 125
4.3.1 Accurate Measurement: Is It the Domain of the Engineer or the Physicist? 125
4.3.2 Metrology in Physics and Chemistry 125
`Not Always Fully Traceable to the SI´: Only for the Chemist? 126
Little Interest in Traceability? 126
Can the Physicist Learn Anything About Metrological Traceability from the Chemist? 127
4.3.3 Metrology in the Social Sciences 128
4.4 Metrological Concepts in Social Science Measurements 128
4.4.1 Elementary Counting 130
4.4.2 Entropy, Perception and Decision-Making 133
4.4.3 Construct Specification Equations 136
4.4.4 Uncertainty and Ability 137
4.4.5 Separating Object and Instrument Attribute Estimation in Qualitative Measurement 138
4.5 Case Studies: Examples of Measurements 139
4.5.1 Physical Measurements 139
Calibration of a Set of Standards 140
Calibration and Testing of a Measurement System 143
Implementation to Measure 143
4.5.2 Human Challenges 145
(A) Calibration of a Set of Standards, Prestige 146
(B) Calibration and Testing of a Measurement System 148
(C) Implementation to Measure 149
Exercises 4: Presentation of Measurement Results 150
E4.1 Measurement System Analysis 150
E4.2 Expression of Measurement Uncertainty 151
References 151
Chapter 5: Measurement Report and Presentation 154
5.1 Qualitative Measurement, Probability Theory and Entropy 155
5.1.1 Differences in Entity, Response and Measured Values: Entropy and Histogram Distances 155
5.1.2 Differences in Measured Values at Each Stage of the Measurement Process 157
5.2 A: Entity Construct Description and Specification 162
5.2.1 Prioritisation 162
5.2.2 Entity Attributes, Construct Specification and Entropy 163
5.2.3 Formulation of Construct Specification Equations 166
5.2.4 Rasch-Based Construct Specification Equation from Logistic Regression 167
5.2.5 Principal Component Regression 167
5.3 Case Study: Knox Cube Test and Entity Construct Entropy 168
5.3.1 Measurement Uncertainty in Principal Component Regression 170
5.3.2 Measurement Uncertainty in the Construct Specification Equation 172
5.4 B: Instrument Construct Description and Specification 174
5.4.1 Instrument Attributes, Construct Specification and Entropy 174
5.4.2 Multi-Attribute Alternatives: House of Quality 176
Organisational Management Collaborative Entropy 177
Synergy 178
5.4.3 Formulation of Instrument Construct Specification Equations 179
5.5 C: Response, Error and Entropy-Categorical Observations 179
5.5.1 Interhistogram Distances on Categorical Scales: Systematic Errors 180
5.5.2 Response and Entropy 182
Intrahistogram Distances: Measurement Uncertainty 182
5.5.3 Deriving Response 184
5.6 Modelling Measurement System Response 186
5.6.1 Ordinary Factor Analysis 186
5.6.2 Psychometric Factor Analysis 187
5.6.3 Sensitivity of System for Ordinal Data 189
5.7 Metrological Comparability and Uncertainty of Ordinal Data: Scale and Sensitivity Distortions 190
5.7.1 Changes of Entity Scale: Acquiescence 195
5.7.2 Changes of Sensitivity 197
5.7.3 Further Tests of Assumptions 199
Logistic Regression and Estimator Bias 199
References 200
Chapter 6: Decisions About Product 205
6.1 Use of Measurement Results and Conformity Assessment 205
6.2 Closing the Quality Assurance Loop 206
6.3 Response, Restitution and Entropy 207
6.3.1 Restitution and the Rasch and IRT Models 207
6.3.2 Perceptive Choice and Smallest Detectable Change 209
6.3.3 Significance Testing 212
Choice Between Two Measurement Methods 212
Product Tests Under Conditions of Repeatability 212
Product Tests Under Conditions of Repeatability and Reproducibility 213
Example: Product Specification 213
6.3.4 Significance Testing: Case Study of Pre-packaged Goods 214
6.4 Assessing Entity Error and Measurement `Value´: Cost and Impact 215
6.4.1 Uncertainty and Incorrect Estimates of the Consequences of Entity Error 215
6.4.2 Consequence Costs 215
Linearly Priced Goods 215
Example: Conformity Assessment of Pre-packaged Goods 217
6.4.3 Measurement and Testing Costs 217
6.4.4 Consumer (Dis-)satisfaction 218
6.4.5 `Discrete Choice´, `Prospect´ Theory and Costs 219
Trading Uncertainty against Utility: Minimal Important Change 219
Discrete Choice 220
Prospect Theory 222
Decision Weights 222
6.4.6 Pragmatics and the Rasch Model 223
Other Models 224
6.5 Comparing Test Result with Product Requirement 224
6.5.1 Risks of Incorrect Decisions and Relation to Measurement Uncertainty 225
Example: Consumer Attribute Risk 226
6.5.2 Consumer and Supplier Risks 226
Consumer Global Risk (By Variable) 228
6.5.3 Mechanistic Model of Binary Decisions: Man as an Operator and Rating the Rater 228
6.5.4 Multivariate Decision-Making 231
6.6 Optimised Uncertainties, Impact and Measurement Costs, Pragmatic Extensions of Significance Testing 231
6.6.1 Example: Conformity Assessment of Pre-packaged Goods 236
6.6.2 Optimised Uncertainties on an Ordinal Scale 237
Exercises: Measurement and Product Decisions 239
Conformity Assessment 239
Significance Testing 241
References 241
Index 244

Erscheint lt. Verlag 24.10.2019
Reihe/Serie Springer Series in Measurement Science and Technology
Springer Series in Measurement Science and Technology
Zusatzinfo XIII, 241 p. 98 illus., 46 illus. in color.
Sprache englisch
Themenwelt Geisteswissenschaften Psychologie Test in der Psychologie
Sozialwissenschaften Soziologie
Technik
Wirtschaft Betriebswirtschaft / Management
Schlagworte Conformity Assessment • Data-driven Science, Modeling and Theory Building • fit-for-purpose measurement • Man as measurement instrument • measurement modelling • Measurement Uncertainty • measurement verification • Measurement with persons • performing measurements • Quality Control, Reliability, Safety and Risk
ISBN-10 3-030-28695-9 / 3030286959
ISBN-13 978-3-030-28695-8 / 9783030286958
Haben Sie eine Frage zum Produkt?
PDFPDF (Wasserzeichen)

DRM: Digitales Wasserzeichen
Dieses eBook enthält ein digitales Wasser­zeichen und ist damit für Sie persona­lisiert. Bei einer missbräuch­lichen Weiter­gabe des eBooks an Dritte ist eine Rück­ver­folgung an die Quelle möglich.

Dateiformat: PDF (Portable Document Format)
Mit einem festen Seiten­layout eignet sich die PDF besonders für Fach­bücher mit Spalten, Tabellen und Abbild­ungen. Eine PDF kann auf fast allen Geräten ange­zeigt werden, ist aber für kleine Displays (Smart­phone, eReader) nur einge­schränkt geeignet.

Systemvoraussetzungen:
PC/Mac: Mit einem PC oder Mac können Sie dieses eBook lesen. Sie benötigen dafür einen PDF-Viewer - z.B. den Adobe Reader oder Adobe Digital Editions.
eReader: Dieses eBook kann mit (fast) allen eBook-Readern gelesen werden. Mit dem amazon-Kindle ist es aber nicht kompatibel.
Smartphone/Tablet: Egal ob Apple oder Android, dieses eBook können Sie lesen. Sie benötigen dafür einen PDF-Viewer - z.B. die kostenlose Adobe Digital Editions-App.

Buying eBooks from abroad
For tax law reasons we can sell eBooks just within Germany and Switzerland. Regrettably we cannot fulfill eBook-orders from other countries.

Mehr entdecken
aus dem Bereich
Grundlagen und Anwendung von Online-Tests in der Unternehmenspraxis

von Heinke Steiner

eBook Download (2024)
Springer Berlin Heidelberg (Verlag)
46,99
Grundlagen und Anwendungsperspektiven

von Katrin Rentzsch; Astrid Schütz

eBook Download (2022)
Kohlhammer Verlag
34,99