Smart Connection Systems - Jong Wan Hu

Smart Connection Systems

Design and Seismic Analysis

(Autor)

Buch | Softcover
404 Seiten
2021
CRC Press (Verlag)
978-0-367-78337-2 (ISBN)
57,35 inkl. MwSt
This book introduces new smart connection systems which can be used in aseismic building design in order to control inter-story drifts and to reduce residual displacements. They are also utilized as damper devices and base isolators. The application of these systems to composite moment frame buildings will also be treated in the book. In addition, the book will discuss how to make nonlinear frame models used for simulating entire behavior in the building as well as advance finite element (FE) models used for accurately reproducing mechanical behavior in the local system. Will be of interest to researchers, engineers, and students in the field of civil and structural engineering.

Dr. Jong Wan Hu received his Ph.D. degree from the School of Civil and Environmental Engineering, Georgia Institute of Technology, USA. Dr. Hu was a Post-Doctorate Research Fellow at the Structural, Mechanics, and Material Research Group of the Georgia Institute of Technology. Dr. Hu also worked as an Associate Research Fellow at the Korea Institute of S&T Evaluation and Planning (KISTEP) and as an Assistant Administrator at the National S&T Council (NSTC) for two years. He is currently Assistant Professor at Incheon National University. He is an active member of ASME and ASCE and his research interests are in the area of smart structures, seismic design, composite structures, and finite element modeling.

Introduction. Literature Review. Design Procedure for Prototype Connections. Smart PR-CFT Connections. 3D Finite Element Modeling. Connection Modeling under Cyclic Loads. Design of Composite Moment Frames with Smart SMA PR-CFT Connections. Nonlinear Analyses for the Composite Moment Frames. Seismic Performance and Damage Evaluation. Conclusion. Appendix A: Detailed Design Examples for CFT Columns. Appendix B: Design Examples and Failure Modes. Appendix C: Instrumentation. Appendix D: The Equivalent Lateral Force Procedures. Appendix E: Detail Design Examples for Panel Zones. Appendix F: Earthquake Ground Motion.

Erscheinungsdatum
Verlagsort London
Sprache englisch
Maße 174 x 246 mm
Gewicht 798 g
Themenwelt Technik Bauwesen
Technik Umwelttechnik / Biotechnologie
ISBN-10 0-367-78337-1 / 0367783371
ISBN-13 978-0-367-78337-2 / 9780367783372
Zustand Neuware
Haben Sie eine Frage zum Produkt?
Mehr entdecken
aus dem Bereich
Grundlagen der Berechnung und baulichen Ausbildung von Stahlbauten

von Jörg Laumann; Markus Feldmann; Mario Fontana …

Buch | Hardcover (2022)
Springer Vieweg (Verlag)
149,99